According to your video it is seen that the relationship is positive. Even I tried it for my area and found the same as shown by you here. But literatures state that there is inverse relationship between LST and NDVI. So how to correctly run the correlation so that the relationship comes as negative?? Any update regarding this issue?
very nice constructive comments but logically ndvi and lst have an indirect relationship. Therefore, before u begin to correlate data management is necessary.
Very Nice. Can you guide me about geocorrelation maps ranges -1 to +1 in maps between two variables. Like these two variables you used in your lecture.
Hi there! I was unable to do this process for my LST and NDVI correlation due to ArcGis saying an error in extract multiple value to a point. What can I do about this?
Sir whenever I am going to do "Extract Multiple Values to Point" it failed with a warning bearing a code of 000184 mentioning "Spatial Index does not exist". Please say how to get rid of this problem. Thank you for the video and will be highly obliged for the solution.
HEY, Awesome video, please share any contact details. i have a few doubts regarding the correlation and fishnet. my "Create Fishnet" command is failing every time.
Please, I have a problem with the Extract tool, how can I solve it? The problem is that it does not exist in spatial space
According to your video it is seen that the relationship is positive. Even I tried it for my area and found the same as shown by you here. But literatures state that there is inverse relationship between LST and NDVI. So how to correctly run the correlation so that the relationship comes as negative?? Any update regarding this issue?
very nice constructive comments but logically ndvi and lst have an indirect relationship. Therefore, before u begin to correlate data management is necessary.
Yes it is right that the correlation between NDVI and LST are inversely proportional. You can see one of my research paper.
geat effort, all the best of luck and success!
Thank you.
This is very nice and useful video, great job👍
thank you very, very much. It has been a very useful video for me.
Please send me the notes via gizemkisaaga@ohu.edu.tr
Oh GOD....i love you. this was so helpful..
Very nice. Thanks yaaa. Makasih banyak lohhh.
Great effort bro..
You are great bro..
thanks brother
Very easy step you shown, can you share this video procedure in word document
If higher ndvi means low lst,then trend line should have shown downward trend
Kindly Prepare a video on Multicollinearity Test on GIS data
the video was very interesting. please can you send the step by step guidelines. i have to do it in my area of study for 30 years
Thank you very much for this video! I was looking for hours how to do it only using ArcGIS. It will be very useful to me.
you are welcome.
@@GISRSSolution Have you solved the TDVI yet. I need your help
In most of the research papers r2 as .90 to .99 range.. but me to getting same 0.28 range as you got..can you explain in detail..
It's very important video tutorial, Please upload another video related to histogram and boxplot in ArcGIS.
Thank you for your interest. I will try to make a video on it. Please keep in touch.
@@GISRSSolution you are welcome!
hello, can you prepare a video about estimate soil erosion using ANN, deep learning?
Very Nice. Can you guide me about geocorrelation maps ranges -1 to +1 in maps between two variables. Like these two variables you used in your lecture.
very nice , i hope to you all beatifil things
please send step by step of correlation with NDVI and LST using ArcGIS and Excel
Can you please provide these notes it would be very helpful. Thank you ❤
Very nice tutorial!
Thank you. Please keep in touch. 😇
Hi there! I was unable to do this process for my LST and NDVI correlation due to ArcGis saying an error in extract multiple value to a point. What can I do about this?
After creating the fishnet, whn i go for the extraction step, it shows error, can you please help me in sorting this out
Sir whenever I am going to do "Extract Multiple Values to Point" it failed with a warning bearing a code of 000184 mentioning "Spatial Index does not exist". Please say how to get rid of this problem. Thank you for the video and will be highly obliged for the solution.
Go to extension tab, and check spatial analyst. Hope you will be helped
Can I use this for correlation between NO2 raster data and ndvi raster data?
If I have my own data point, how can I use those data point instread of create the new point ?
Thank you
Thak you,
how to calculate SPI in Arc GIS software
Thank you very much.. may be you can find higher than 0,6 or 0,7 correlation when you delete mines (-) ndvi values..
Iam having spatial index error in the step of Extraction to Multi Values Point , please help me regarding this.
I just want to ask what's the use of creating fishnet? Thank you
thank you so much. May i have the document with procedure
did u have any journal for this methode ?
@GIS & RS Solution hello to extract ndvi value for time series for each land cover class thank you so much
Hello, can you help me make a drought identification tutorial with TVDI (this correlates with NDVI and LST regression)?
I also need help with this !!
Have you solved the TDVI yet. I need your help
hi bro I follow u r video its good but when i clip my area of interest i can see some negative values in ndvi its ok
could you please send me how to correlate between LST, NDVI, add Moisture index in ARCGIS PRO. Thank you
I would like to have the document to practice
Can you make a video on Surface Urban Heat Islands? You are trustworthy on youtube for geoinformation. I hope you can help us.
hi, would you please send me step by step guideline thank you
Hello, can you send me the process of doing this?
Hello, can i calculate correlation between 14 indices using ArcGIs too? thank u!
Hello. Can you help me to make a tutorial about correlation ndvi with canopy cover? thank you
Nice! Please, could you send me the step guidelines?
daniela.werneck@unb.br
Nice tutorial, can I have the word document
Hi, Have you taken raster file of NDVI or tiff file?
Thanks so much !!
I need this document
Hello can i get the step please
Sir, please correlation with last and nobody step by step documents
I can't see any negative NDVI values in my attribute table, please help me with this.
I think you should do it again following this tutorial properly. If you face any issues then please let me know. Thank you.
@@GISRSSolution sure, thanks for your responses. please keep making such extremely important videos.
Very Nice. please can you send me the document with procedure.thank you very much ser
Can I have the documents?
thanks for this tutorial video, send me this document please.
can i get a sample of step by step file please
Nice. Can we also do it in qgis
Yeah, You can do this in QGIS.
Sir I need this document
Can we skip fishnet step? I think it is not needed.
Yeah. You're right.
what is the name of this method ?
i need this doc ...
Very Nice i need the file
SIR PLEASE SEND ME NOTES ON ARC GIS QGIS AND ENVI
PLEASE SEND ME THE FILE WORD USED IN THE VIDEO, THNS IN ADVANCED...
Hello I would like this document please. Is there another way of sending my email ?
Hello sir i tried but most of the point file is showing -9999
May be you did not operate it correctly. Try again. Hope you will able to do it.
Please share documents file
HEY, Awesome video, please share any contact details. i have a few doubts regarding the correlation and fishnet. my "Create Fishnet" command is failing every time.
haii..may i ask, its there any solution of ur problem? cause i had the same problem here
Correlation is wrong, it must be negative. Please correct...
sir it was very helpful , could you please send me the document in mail
Hi csn you help me
Document
alywas hazard in multi view point
kebalik lu om
You're wrong in your analysis when LST increase NDVI increase too there's no negative relationship
nah ini bener
???
Nope man. This is absolutely correct. You can consult with experts.
I mean in your analysis the relationship is positive do u understand me ?
@@GISRSSolution I really don't understand why the line was going up? Could you explain me please, Sir?