HK P30 SK Tabletop Review
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Tabletop review of the HK P30 SK with LEM Trigger. Article:loadoutroom.co...
See our full shows on CarbonTV! mbsy.co/hGzf2?u...
Support this channel with some swag at www.cafepress.com/GBGunsMerch
That's some actual innovation right there from H&K. Double action only hammer without the double action weight giving you a consistent striker fire feel, but still has re-strike ability. I wish more companies could think outside the box like this.
I had a USP in 40 S&W. The recoil with that gun is remarkable. Very very smooth.
Wow - I was blown away by the laser engraving on the box. While it was absolutely not needed it was impressive to see the amount of detail that H&K has poured into this pistol. It speaks volumes on of the pride of their workmanship. If you want to know if you are dealing with a quality organization ask to use their bathroom. In this case the box tells a lot. Definitely will put this pistol on the short list. Thanks for sharing your review.
My favorite gun and favorite carry!
Thank you Graham for producing these videos. I like the way you do them.
Thank you! Be sure to check the pinned comment or description for links to the articles they were made for.
Very nice video! This was the first video I've seen that actually showed the loaded chamber indicator, magwell lockout, and the various grip sizes. :)
Although I traded it in for an HK45C, I still miss my P30SK so much
I agree with you on the paddle mag release, Graham.
So much so, that while I am a huge Walther fan ( carry a PPS M1, daily-- *because, among other things, it has the PADDLE MAG RELEASE* ), I'm seriously tempted to switch to H&K!
Thanks for what you do!
🖒😎
Love my HK P30sk
I’ve only shot the P30 full size, but I love its setup for da/sa with a decocker and especially the paddle mag release. Can’t wait to see how the accuracy is.
Love the Megadeth intro too!!
My P30sk is very high quality and built like a tank. I wish it held more than 10 rounds in it though. If it held 13 in the standard short magazine it would be beyond perfect.
They don't make tanks out of plastic. So no your HK p30 is NOT built like a tank.
spicecrop Methinks you take the expression a wee bit too literally.
I haven't fired my Hk P30Sk for three years. Had a stroke three weeks after getting it, heart defect. I have recovered fine motor control enough to safely and precisely handle a pistol again and now...goddam pandemic.
@Liverpool 11 my heart? I mean it's defective but I'm kinda using it. So, maybe. What are you offering?
@Liverpool 11 it's a V3. No choice where I live, but a damned good pistol. I actually went to the range with it a few weeks ago. Wonderful pistol, I shot it tolerably well right away.
@Liverpool 11 I don't think you can go wrong with the pistol though. The DA is not the best, but I'm told they can be cleaned up and made quite smooth.
Thanks for the vid and for your service. Be safe 👍🏻👍🏻
Can't believe you've never had an H&K. I thought you'd owned everything since the rock became a weapon. ----- I do like that the spring is under the changeable grips so it can be easily reached, cleaned and changed if needed. And it should keep some residue off it. Nice touch.
Yup, I handled the VP9 when it came out, but saw it as a more expensive PPQ.
Do these all come with pinky extension mag? I just ordered the V1 LEM LE with night sights and 3 mags.. praying at least one mag has the pinky extension
H&K is the way.
Добрый Вечер Грам, wanted to know your thoughts and opinion on HK USP full size. Its been my primary EDC for the last 6 years. ( 9mm Variant 1 ) Rd count approximately 2500-3000 0 stoppages.
I don't have much experience with the USP. Sounds like it's served you well.
@@GBGuns it has served me incredibly well. I am very partial to that gun so my opinion is always biased . I would definitely recommend you to try it out if opportunity presents itself. Would love to hear your opinion .
Nice Review.
This is another HK P30SK review for the LEM version. Pretty much ALL HK P30SK reviews are for the LEM version.
Nice gun! I like it !👍
Well done vid. Thanks
What size punch did you use to remove the grip pin? Thanks
Do you if I can purchase in California?
Is it compatible with a TLR1 HL?
I think I prefer this to the PPQ SC, despite loving the Q trigger. I don't know about the VP9, but on the PPS, you can use the striker protrusion through the backplate in the same way you are using the hammer as a safety during reholstering.
Good point
Yes, but the hammer gives a lot more control than the PPQ striker pin.
rtucker1004 perhaps. Works either way
?...I was taught letting the slide fwd could cause issues with the magazine follower with the mag still in empty...or is it more just dont do that too often?
On HK's or semi-autos in general?
The Triggerati wasnt sure if it mattered I only have one hammer fired pistol..so not sure there
I had heard that on some guns the ejector or follower can be hit when you drop the slide. In terms of unnecessary wear, I'm sure it's a good idea to avoid dropping the slide forcefully all the time though.
I've never experienced any issues with it and do it all the time.
Your friend is correct...gun not cleared till magazine removed. I like to see the floor through the magwell myself.
What the person was suggesting is that the magazine must be removed first - not whether it must be removed at all. What G.B. showed is that the slide may be locked back first, then the mag, with the gun still being effectively cleared of ammo (though I personally prefer to remove the mag first).
I like the flush-to-frame hammer. I had a USP Compact 9mm that was the same way - I just sold it because, while it may have been "compact" for the mid 1990s, it's just too bulky to even live in my car's center console, let alone a carry holster. I wish H&K made a smaller hammer-fired pistol than the P30SK, because I am an HK fanboy, but I think the Sig P365X just ticks all the boxes for what I'm looking for in a compact 9, aside from being striker-fired.
Nice video, wonder how it compares to the Sig P365.
Hugh Campbell quite favorably considering the questionable quality of the Sig.
I was between the P365 for small size and the P30 for the LEM trigger and paddle release. I bought the P30 and very pleased with my decision. H&K ergonomics are far above the Sig, too!
Good job
For the money, The Bersa TPR9C is a better DA/SA Conceal&Carry pistol for a lower price. What say you GB?
The TPR9C is one of my carry pistols, TPR9 full size is my night stand gun.
The Bersa TPR9 is my Night Stand Pistol as well. Have a Olight PL Mini on it and loaded with HST
Very expensive da/sa , twice the price of an XDE . Nice LEM trigger.
You get what you pay for.
I also think is better to remove magazine for safety check. But other then that nice video!
Im not lazy when is about safety. You should think about gun like is ALWAYS load so, if You think : "its ok magazine is empty" You already break that rule. In the dark in stres, on the move, is not that easy to se follower. And im using the same metod everytime. And first what I do is put my finger in place where magazine should be, or should be not in case of clearing.
Prep Sho If I’m in the dark, under stress, & on the move, I won’t be clearing the weapon! I’ll be loading it!
The V3 is the one to get.
I wasn’t a fan of the LEM trigger but in da/sa I love it
Modified Weaver is the best. ; )
My EDC
just to brag i just got a HK VP9 :)
Strange, copying Taurus with the pistol lock.
Critical flaw IMO, when will this ever be fired DA? Only if a round doesn't fire. I believe any da/sa hammer fired pistol needs a decocker or the function is useless. I personally would not be comfortable carrying this gun with a round chambered.
I LOVED my P30SK. I HATED my P30 LEM though.
What didn't you like about it?
Craig Wildfeuer why?
Tabletop who do you think you are nutnfancy
Did you see patches? Did I push you towards something not related to the pistol? Did I spend 10minutes talking about something else?