Upgrading my logitech z313 subwoofer with a dayton audio nd105-4
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- Dayton audio nd105-4 (parts express): www.parts-express.com/Dayton-...
Dayton audio nd105-4 (ebay): www.ebay.com/itm/321501717144
Logitech z313 (amazon): www.amazon.com/Logitech-980-0...
Join my discord: discord.gg/E5bdAE79Dw
0:00-0:31 Intro
0:31-1:00 Unboxing
1:00-1:30 Overview
1:30-2:10 Old Driver Removal
2:10-2:46 Installation
2:46-3:19 Initial Testing
3:19-4:27 Fixing Mechanical Noise And Test Conclusion
4:27-5:34 Woofer Excursion
5:34-5:59 More Tone Generator Testing
5:59-6:52 Bass I love you
6:52-7:25 Conclusion
7:25 Outro - วิทยาศาสตร์และเทคโนโลยี
UPDATE: I fixed the weird distortion noise by taping around the woofer with electrical tape, I guess the original gasket wasn't enough and I needed to put tape there to seal it up
I gotta do this with my logitech x240
@@speakertester65
Absolutely would recommend, Made my z313 sound 10x better!
@@RMA2009 bet man you Convinced me lol
@@speakertester65 I looked up your sound system and it seems to have the same subwoofer design as mine. A few things I'd recommend: You need to enlarge the screw holes on the new driver so they line up with the original holes. The driver in the x240 looks different but knowing Logitech it is most likely 4 ohms and is most likely powered by the same amp. I'd still check the impedance of the original driver and make sure it's 4 ohms. Next, once the new woofer is installed I'd recommend taping around it with some electrical tape to really seal it up and get rid of almost all the mechanical noise. If you have any questions about this mod, Just comment and I'll most likely respond.
@@RMA2009 thx man
the ultimate upgrade for a little subwoofer like this would be replacing the port with a 6.5 inch passive radiator, i would build a new box for the amp and use speaker terminals to connect it to the subwoofer.
at this point you would be free to use any kind of passive subwoofer so making a new box for the active driver and passive radiator would make it so you can go back to the original box incase you mess up, it would be like having a huge port that you can still tune low (with weights) in a small box and whats not to like about that.
My favorite song is scarlet fire
What a handsome chap
My Logitech subwoofer has a ripped surround and a big hole in the surround and its base is getting really bad
Stock amp can power it fine? Does it really make a difference, the stock speaker rumbles my floor and sofa near it i wonder how it would be with this woofer
huge difference, bass is much deeper. Cleaner, and louder. stock amp will have no problems with a 4ohm woofer
I HAVE THE STOCK VERSION HOW DO I GET THE SUBWOOFER TO ACTUALLY PLAY SOUND IT ONLY COMES OUT OF THE LIL TWO SPEAKERS NOT THE BIG SUBWOOFER PLS HELP
something might have became undone inside, send it to a repair place or try to repair it yourself if your experienced.
I have the same buzzing noise. I found that it was the 3.5mm jack which I fixed it by putting electrical tape over it, but that's just me.
the 3.5mm jack at the back of the sub tends to leak air for some reason
HOW DO I TURN ON SUBWOOFER PLS HELP BRO
Should be on by default, something might have came undone
Remove the port and replace it with something better. It's just a stupid piece of cardboard. I'm sure it will make a difference.
I tried sealing it, but that did not sound good. I'll just deal with the port noise