Increase the bolt spring preload by turning the adjustment screw counterclockwise. This screw is accessible thru a slot/hole in the stock mounting tube. There are a couple of good videos on how to do this on utube
I have. It's not had any affect because I believe the hammer is dragging on the plastic casing. It was shooting 305 fps before with co2 and 290 ish with HPA at 1100 psi
interesting, i have not played around with that with mine, it is more of a small game one, only mod i did with mine is get the refillable c02 cartridge
Check the video's, I made one for mine. Took like 10 minutes and you can get the fill port for 6 bucks, from China that is. 16 bucks for one already in the states on Ebay
@@kidpellet6544 yah i saw that, i already had gotten the refillable one, but i didnt think of that, the way mine works it can only be filled while in the gun, is yours the same?
@@highlander200268 yes. I just wish I could remove it without dumping the co2. I could probably make another adapter with a valve at that end. Kinda like a paintball tank. But I get my co2 in a large tank for under 25 bucks, so i just dump it when I take things apart
Increase the bolt spring preload by turning the adjustment screw counterclockwise. This screw is accessible thru a slot/hole in the stock mounting tube. There are a couple of good videos on how to do this on utube
yes! take apart video
Underneath the adjustable butt stock there's a hole. There's a adjustment u can make. Have u tried that?
I have. It's not had any affect because I believe the hammer is dragging on the plastic casing. It was shooting 305 fps before with co2 and 290 ish with HPA at 1100 psi
interesting, i have not played around with that with mine, it is more of a small game one, only mod i did with mine is get the refillable c02 cartridge
Check the video's, I made one for mine. Took like 10 minutes and you can get the fill port for 6 bucks, from China that is. 16 bucks for one already in the states on Ebay
@@kidpellet6544 yah i saw that, i already had gotten the refillable one, but i didnt think of that, the way mine works it can only be filled while in the gun, is yours the same?
@@highlander200268 yes. I just wish I could remove it without dumping the co2. I could probably make another adapter with a valve at that end. Kinda like a paintball tank. But I get my co2 in a large tank for under 25 bucks, so i just dump it when I take things apart
or put a bleed valve in back of the fill port
Once again are you making and selling the hpa adapters ? If so how much do you get for one ??
Ten bucks plus shipping
@@kidpellet6544 is that the complete adapter all I'd have to do is add my tank ???
Arrow guns are great I like them and I have a crossbow for hunting deer I think you can kill a deer with it so I'm going to have fun with