Does that loop underneath compramises on ground clearance? Coz in the video it seemed like the exhaust is looping beneath and might be lower to the ground
if you have the same pipe,it should fit!just slide the slip on to the link pipe and make sure catalyst is inserted in the proper direction, the other end is longer!
thank you! 🎉 excited for the next rideout 😁
naulan naman !!!
Looks and sounds really good. Thanks for the video.
Thanks for watching!
Does that loop underneath compramises on ground clearance? Coz in the video it seemed like the exhaust is looping beneath and might be lower to the ground
I don't think it has that much of a difference compared to the stock since the stock ones have a massive chamber that goes under the engine.
@cheen0V yeah got it. It does look good though with that new exhaust.
maybe the loop was created to simulate longer pipes needed to accomodate more exhaust gas!Thanks
sounds soooo good, i like the grunt of the twins
Did you loose the radiator to be able to get the bolts off, thank you
no,just use an allen key!Thanks
@@mylestv14 ok seems hard to get the upper bolts. But I will figure it out😃
when we unscrew it,the bolt was not that super tight!
On the top Bolt my allen key doesn’t fit well, would need 1 cm more space to get it in place.
Did you need to get a tune or anything? How does the bike run without a tune if you did not get one e?
Arrow website says an increase in horsepower is expected when remapped!Thanks
which one you like most the gxs s750 or the gxs 8 please reply
s750 has 4 cyl,screams!!! gsx8 has more riding aids!thanks
Hİ did you move radiator to take headers screws ?
no, we were able to find enough space for an allen key to turn the screws!Thanks
what is that grey stuff u are putting on pipe?
anti-seizing paste
What gaskets did you use for install??
we did not replace the gaskets/we assumed gasket stayed in its place when the manifold was removed!thanks
is the install the same as for the gsx-8r?
i am not sure, and also how would it be with the fairings! Thanks
is this install with kat and db killer?
yes!
Is this bike 180 or 270 crankshaft?
270degrees!thanks
Apologies for asking, is it a genuine Arrow system or a very good Chinese copy?
it is from Arrow Italy!thanks
Hello, i have the same one but i don't know how to install it at the back Pedal 🙆♂️ can you explain me how you did this? Thank you
if you have the same pipe,it should fit!just slide the slip on to the link pipe and make sure catalyst is inserted in the proper direction, the other end is longer!
damn, it's quite loud for having cat and db-killer. Are you sure this is road legal? lol
cousins bike has so far not yet been stopped by cops!according to him!Thanks😀
astig pre
hehe magastos na libangan pre!
@@mylestv14 deserved mo yan tol at masipag kayo magasawa magtrabaho
@MrJunmirasol lahat naman tayo d2 kailangan magsipag! kayo nga ang masaganang pamumuhay pre☺️
Bella lho comprata anch'io in Italia!
Mille grazie Gian! ciao
Ciao e w suzuki 💙💙💙@@mylestv14
How long were those allen keys ?
i remember using allen keys from a set with ball end
What gaskets did you use for install??