Watching you change the TPS sensor gave me an idea. I was having high idle issues with my swap. Changed the sensor and it idled down to normal. Thanks for sharing
One thing i learned from ls swap, is to run the motor especially if cammed AS LESS AS POSSIBLE, until the proper tune is in. Plugs will foul quick, and sensors will fail because the computer is confused
blue smoke is due to bad valve seals in the heads. When the car sits after running, oil gets by the valve seals in the heads and gets into the combustion chamber causing it to smoke when it cranks up
Only after a flush or a new pan and gasket when all fluid is drained u aint gotta have it running to add or top off… lol u shadetree u and them 9 likes
I heard the same thing but I went through 3 acdelco sensors that was bad and install with a duralast and haven't had anymore problems.I think it's luck of the draw because all this shit is made in china just rebadged
That bad boy sounds good you did a great job on that I know you not finished yet but when you do it's going to be one of the best looking Malibu with pearl paint job you killing them right now keep doing your thing
Salute to you for doing all the wiring yourself that is what I absolutely hate and always hire someone to do which I should probably learn how to do it myself because its not cheap
Always best to do things yourself so if something happens you dont have to rely on anyone else. Dealing with shops these days is a nightmare.. SO learn to do as much as you can yourself and if you need help there are people online always willing to help. You did a good job. At least you have a painter you can rely on. That is usually the worst to deal with
Proud of you young brotha for starting you channel. Hope you have much success. I have a 71Chevelle and a 1980 Monte Carlo. Nice to see young Muscle Heads!
Also get the transmission linkage adjusted bro it might be sticking. Also make sure the shifter isn’t tight or sticking.check the cable also it might be to tight.
Yea thats yo cable linkage bro, it need a lil bit mo length on it because its hanging up after you go in gear and its not going back in park all the way, my linkage doing the same thang after i go in gear i cant go back in park unless i go up under it and manully put it in park, i know for a fact my linkage is too short
He always 10/10 for me You got me thinking on that 84 I’ve never entered a giveaway but I’m thinking hard on that OG box it belong here in Ohio with me 😁
Bro,you need to check those rocker gen 3 rocker are straight.The exhaust and intake rockers are the same.The one I saw looks like it was slanted.trying to look out. I could be wrong.
I know what you talking about money I was riding with you when you fixed it all up yeah it was it came a long long ways😅 yeah spray why he did do that I watch those videos too and when you dropped it off to spray way
Thanks for watching hit the link an support the 1984 og box Chevy giveaway….
rafflecreator.com/pages/77406/1984-chevy-caprice-(box-chevy)
Hello sir, how I can I message you personally. I have a few questions ?
Watching you change the TPS sensor gave me an idea. I was having high idle issues with my swap. Changed the sensor and it idled down to normal. Thanks for sharing
One thing i learned from ls swap, is to run the motor especially if cammed AS LESS AS POSSIBLE, until the proper tune is in. Plugs will foul quick, and sensors will fail because the computer is confused
Sprayway A1… That Bu sounding HEALTHY
Yes Sprayway did his thing that's a perfect paint job that you put together
Happy Home
Happy Malibu.!!!
SprayWay is truly on point
That Malibu so Gangsta...straight PRESSURE 🔥💯
Problem is in the tune👍🏿
The Malibu is show quality! I hope your wife feels better soon!
The car is amazing, I watched Sprayway do his thang.... please don't leave the painter's tape on it too long...
10 out of 10 for Sprayway
blue smoke is due to bad valve seals in the heads. When the car sits after running, oil gets by the valve seals in the heads and gets into the combustion chamber causing it to smoke when it cranks up
Very True 👌💯
Car needs to run while filling transmission
Only after a flush or a new pan and gasket when all fluid is drained u aint gotta have it running to add or top off… lol u shadetree u and them 9 likes
I strongly agree!!
I love your grind bruh....I swear I go through the same type of problems with my donk & DTS.....Keep going!
I had have a buddy who swears to never buy electrical components from auto zone and he’s a manager for them.
🤷🏾♂️🤷🏾♂️
He told you right they parts are all rebuilt used parts.
Also make sure the carb ports & jets isn’t clogged. Also adjust carb so the smoking can stop its running rich.
I heard the same thing but I went through 3 acdelco sensors that was bad and install with a duralast and haven't had anymore problems.I think it's luck of the draw because all this shit is made in china just rebadged
@@LifewiththeIkesyou going to the car show Saturday
SPRAYWAY DID THAT HE PUT HIS FOOT IN IN THAT PAINT 10 out of 10 all day💯💯💯💯🔥🔥🔥
That bad boy sounds good you did a great job on that I know you not finished yet but when you do it's going to be one of the best looking Malibu with pearl paint job you killing them right now keep doing your thing
I give the paint a 10 he did his thang
Malibu sounds good
9.5/10 because the camera do no justice... salute the grind 💯🤙
Salute to you for doing all the wiring yourself that is what I absolutely hate and always hire someone to do which I should probably learn how to do it myself because its not cheap
Always best to do things yourself so if something happens you dont have to rely on anyone else. Dealing with shops these days is a nightmare.. SO learn to do as much as you can yourself and if you need help there are people online always willing to help. You did a good job. At least you have a painter you can rely on. That is usually the worst to deal with
Sounds damn good!!
Proud of you young brotha for starting you channel. Hope you have much success. I have a 71Chevelle and a 1980 Monte Carlo. Nice to see young Muscle Heads!
Yeah bro I've been following you from day one with the Malibu it's really come a long way you did a great job on it. You won on that one 💯♥️🔥👍💪💲
I agree it just might be the cable.
10 out of 10 for sure but that’s anything sprayway touch
Triple 10, bro flawless
He definitely showed out with this one
I hope that’s not the final paint job for that beautiful Malibu
Also get the transmission linkage adjusted bro it might be sticking. Also make sure the shifter isn’t tight or sticking.check the cable also it might be to tight.
Oh the og Chevy, try putting the filter on the pan, it could be running to fresh. Also try idling it down.
Clean Malibu fam
Check the o2 sensors, it can also be the ignition control module gone bad.
🔥🔥🔥🔥
The definite I give him 10 out of 10 real talk he earned that to the max
The carb on the 84 its the vacuum on the left side a they go bad from sitting
spray way is the truth frfr I give him a 💯
Thats some good work there💯
He gets a 10 forsure it's clean cuzo
That car sounds nice.
Sometimes it's not the sensor could be the ground or a short in the harness
10 out of 10
Yea thats yo cable linkage bro, it need a lil bit mo length on it because its hanging up after you go in gear and its not going back in park all the way, my linkage doing the same thang after i go in gear i cant go back in park unless i go up under it and manully put it in park, i know for a fact my linkage is too short
Bro o had that same problem. Change out that Chine throttle body. I put an Holley and it stop.
Hey in the Malibu what overflow is that
That b piping💪🏿
Transmission cable needs adjustment!!
The car need to be tuned, I ke you should know that 😮
10/10
That door almost hit the truck and my heart dropped
Deadass 😂
What piece you find for the seat again? The link please sir 🤝🏽
What radiator hose are you using?
Valve seals is why it’s smoking
Oh shyt I need to get in on the box. I got a 6.2 waiting for a good body🤫🤫
Get ya tickets
What crossmember u use
Wear u get the intake tube from?
eBay
Car suppose to be running when adding transmission fluid
10/10 know doubt
Yes change that harness out
He always 10/10 for me
You got me thinking on that 84 I’ve never entered a giveaway but I’m thinking hard on that OG box it belong here in Ohio with me 😁
Get ya tickets
10 out of 10 I see you haters watching lol 😂 spray way song 🎵
Jay Malcolm on TH-cam works on carburetors
U will have to get it tune tuner control door open and close on throttle body or u have a vacuum leak
Big 10 spray way
I give spray way a ten out of ten bro real talk
Box needs Value seals why it’s smoking
👍🏾
Go get you some of the wrap film to wrap that car up while you working on it dont mess up that body and paint
SprayWay did his thing bro 10 out 10 4sho
What muffler u running on the chevy malibu
Black widow Angry house if I'm not mistaken
@@Graddy88 yeah that it thanks
I will give Sprayway 100❤
That’s a stage 3 in the Malibu
How many hp is the Malibu
🤷🏾♂️
Yeah a 10 plus
Hey my car do the same thing I have a crown victoria 2004 and I crank it up if I let it run it'll idel up high
Are you gonna put Factory AC in
Vintage air
I'm looking some one help set up short rear-end on 65 mustang
J Mac
Bro where are you located? I need some help with getting my LS
I don’t be workin on other people cars bro I’m learning as I go
Bro,you need to check those rocker gen 3 rocker are straight.The exhaust and intake rockers are the same.The one I saw looks like it was slanted.trying to look out. I could be wrong.
These ls3 heads that’s how the rocker arms suppose to be
What is the part number I think I’m having the same issue
Did you talk to bad talk about what mufflers to get for the Chevy with a xpip
Do a tps relearn
🤷🏾♂️
What can is that love1 ?
Oem sensor and a good throttle body will fix the problem almost every time
I know what you talking about money I was riding with you when you fixed it all up yeah it was it came a long long ways😅 yeah spray why he did do that I watch those videos too and when you dropped it off to spray way
Where the blueprint Chevy at
Getting the floors done if I remember correctly
It should be done the last video was getting ready to paint
Spray way for sho the goat on that body and paint he got my respect🦾👍🏼 and u the new pimp my ride guy🦾👍🏼
10 out of 10
10/10