Una consulta yo tambien estoy armando un nissan b13 ga16de veo tus videos(traducidos) mi pregunta es, al poner tus pistones de alta compresión que mas tiene que modificar, y tambien le pondrás turbo al motor con pistones de alta?
Buenas y saludos lleve el mio de fabrica para la pista de Salinas en PR a correr circuto y me gustaria saber si ese motor se puede correr sin turbo y si le puedes sacar buen caballaje para poder competir sin restricciones en los eventos gracias.
¡Buenas tardes! Honestamente, no sé la respuesta. Está es la primera vez que hago un motor alta compresion, pero según la información, se supone que haga más power que de factoria. Si te vas con una ECU programable, ponerle ITB o 4 throttle puede que ayuden. Ya todo eso sería custom. Éxito con el proyecto.
What is the compression ratio with this piston? What fuel do you want to use? Ethanol? I think the CR will rise up 13:1.... Or you get a thicker head gasket? Wouldn't Pg6 pistons be a better choice? 🤔 At the moment I do also rebuild and making faster a Ga16De for my Nissan Micra (March). But which pistons should I use? I'm not sure about that at the moment. 😄 I hope you have some advices for me...
I wish i can help you with some advice, but this is the first time I'm going this build and I figure out things as I go. I'm not sure what the car will be, and instill haven't decided on which fuel I'll be running. There are not many options for head gaskets beside graphite either. Keep me posted with you build. 👍
@@G2GBuilds Over the next few days, the head, piston and seal will be precisely measured. Then I can say more. It can be a maximum of 12:1, otherwise you can forget pump gas or you have to live with the fact that you have 10-15 hp less because you lose it with the ignition.
Hello. The ga14de did not come to America. I know the block bore is smaller than the ga16de. That means that I have no idea what your possible options could be.
Puedes comprar lo mismos pistones de honda p29 pero en std que mide 75mm y tú motor de ga14de mide 73.6 mm solo tendrías que llevarlo a una rectificadora y ponerlo 1.4mm más grande el cilindro y listo saludos
@@G2GBuilds yes if you can help me with all the parts and everything I need i previously emailed u about some stuff. I am gonna have a machine shop build it for me I just need to know what parts I need to have high HP N/A car cause I don’t wanna turbo it yet
I got a rebuild kit from eBay, and 76mm bore Honda civic with D16 engine pistons. There are many options. I had the machine shop machine the stock GA16de rods. That's what I have. Hope it helps.
@@G2GBuilds I’m just gonna do an oem rebuild rn I just dropped the block off to the machine shop so hopefully I can have the car running before summer time
![Zac’s 572ci BIG BLOCK Squarebody is a 700HP MONSTER! [4K]](/img/n.gif)
Great vid mate. Can't wait to see the end results of the build.
Thanks brother. The engine should be ready this summer, God willing.
Cómo.te fue con este setup@@G2GBuilds
@@YABAYURENAULT4 El motor no está terminado. Cuando el motor se arme, subiré un vídeo. 👍
Good job.. 😊
Thanks my brother. 💪
Thank you and your dad! i love working on the engine with my dad :)
Nice job bro....finally got to meet dad virtually lol 😁
Yes. Lol
He's the mastermind behind everything i do.
excelente Nissan power yo quiero esa receta también ❤
Una consulta yo tambien estoy armando un nissan b13 ga16de veo tus videos(traducidos) mi pregunta es, al poner tus pistones de alta compresión que mas tiene que modificar, y tambien le pondrás turbo al motor con pistones de alta?
Las vielas de ga16de, tienen que ser modificadas profesionalmente para aceptar los pistones de alta compresión de honda.
Dirmelo jose! Saludos andas con el father! El duro el chequele racing!
Así mismo es. 💪💪
Buenas y saludos lleve el mio de fabrica para la pista de Salinas en PR a correr circuto y me gustaria saber si ese motor se puede correr sin turbo y si le puedes sacar buen caballaje para poder competir sin restricciones en los eventos gracias.
¡Buenas tardes!
Honestamente, no sé la respuesta. Está es la primera vez que hago un motor alta compresion, pero según la información, se supone que haga más power que de factoria. Si te vas con una ECU programable, ponerle ITB o 4 throttle puede que ayuden. Ya todo eso sería custom.
Éxito con el proyecto.
What is the compression ratio with this piston?
What fuel do you want to use? Ethanol?
I think the CR will rise up 13:1....
Or you get a thicker head gasket?
Wouldn't Pg6 pistons be a better choice? 🤔
At the moment I do also rebuild and making faster a Ga16De for my Nissan Micra (March).
But which pistons should I use?
I'm not sure about that at the moment. 😄
I hope you have some advices for me...
I wish i can help you with some advice, but this is the first time I'm going this build and I figure out things as I go.
I'm not sure what the car will be, and instill haven't decided on which fuel I'll be running. There are not many options for head gaskets beside graphite either.
Keep me posted with you build. 👍
@@G2GBuilds Over the next few days, the head, piston and seal will be precisely measured. Then I can say more. It can be a maximum of 12:1, otherwise you can forget pump gas or you have to live with the fact that you have 10-15 hp less because you lose it with the ignition.
Herth+Buss used to make thicker head gaskets (1.6 and 1.8mm). Unfortunately out of stock. 😔
@@thomass613 there is a lot of things out stock too. Camshafts is another example.
@@G2GBuilds Thank God there are still enough camshafts for the European non VTC variant.... including different performance variants. 😊
loving the progress bro. is it still going to be boost
Thanks brother.
I still undecided. Time will tell.
@@G2GBuilds maybe you could start allmotor and see how it runs
Very true..
what hi comp piston are you using?
Hi i have a ga14de engine what high compression piston can be used please. Help needed
Hello.
The ga14de did not come to America. I know the block bore is smaller than the ga16de. That means that I have no idea what your possible options could be.
Puedes comprar lo mismos pistones de honda p29 pero en std que mide 75mm y tú motor de ga14de mide 73.6 mm solo tendrías que llevarlo a una rectificadora y ponerlo 1.4mm más grande el cilindro y listo saludos
Can you give me a link to where you got your apr head studs from?
I don't have the link at the moment, but they ARP head studs for S13 Nissan 240sx with the KA24DE engine.
I know you said this is not a info video. But I'm desperate to know what pistons you used?
Pistones p29 de honda d16 al 40 para que quede en 76mm ya que el std de honda es 75mm
@@YABAYURENAULT4 I appreciate your response 🙏🏽🙏🏽🙏🏽
What ecu do u run and how are you tuned ??
I'll use the same one I'm using now. OBD1 sr20de ECU with nismotronic board on it.
@@G2GBuilds how are u using sr20de ecu with ga16de engine and harness ?
@@elitetoxicity9446 yes
Need some 263 cams now bro
I'm accepting donations. Lol 😁
Where can I get one of those
Can u help me out I am trying to fully rebuild my ga16de also I either wanna do a oem rebuild or have it fully build so I won’t have any issues
I can help you to provide the information. My dad is the one who got the short block assemble.
@@G2GBuilds yes if you can help me with all the parts and everything I need i previously emailed u about some stuff. I am gonna have a machine shop build it for me I just need to know what parts I need to have high HP N/A car cause I don’t wanna turbo it yet
I got a rebuild kit from eBay, and 76mm bore Honda civic with D16 engine pistons. There are many options. I had the machine shop machine the stock GA16de rods.
That's what I have. Hope it helps.
@@G2GBuilds I’m just gonna do an oem rebuild rn I just dropped the block off to the machine shop so hopefully I can have the car running before summer time
Hey mahn i wana turbo my ga16 carb ...can it be done?
What's up brother?
Anything is possible, but I'm not familiar with the GA16 carb engine. I'm sure someone has probably done it.
What arp studs fit the ga16?
Nissan ka24de engine
Hi my friend , are those pistons Honda p29?
Hey!
Yes.
@@G2GBuilds wow just fit like that, nice 👍🏻
@@ItzgeogamingYT the ga16de connecting rods must be machine first.
Wow the block looks tiny here
Yes brother. This isn't a big engine.
@@G2GBuilds I mean, my ga15 sitting on the floor seems bigger, but it's all still in one piece
Got you. Yes, the block was naked. Lol
Ok but how do you get the ga16 trans to survive? I keep losing 5th gear with a stock engine lol
No idea. We will find out this year. Lol