HONDA AIRBLADE COOLANT CHANGE
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- 1)Place your bike upright on a center stand.
2)The majority of drain bolts are found on the lowest part of the cooling system, or on the housing of the coolant pump. For bikes without drain bolts, the lowest hose should be removed in order to drain. Be sure the coolant is cold before attempting this task.
3)Put some kind of tray or other receptacles under the drain bolt, then take off the radiator cap in order to relieve any system pressure and permit the coolant to exit with ease. Turn the drain bolt a few times to loosen
4)Prepare the coolant and the funnel.
5)Insert the funnel in the radiator top and steadily fill with coolant. Pause regularly to enable any trapped air to escape. Purge any trapped air in the hoses by squeezing them gently. Fill coolant up to the point where the boom of the rad cap will be when fitted.
6)After refitting the radiator cap, pour coolant into the header tank, filling it to the point halfway between the upper and lower fill marks.
7)Turn the engine over for a minute and check to make sure there are no leaks. Idling the engine in this way should release any remaining trapped air.
8)Take off the radiator cap and check that the coolant level is satisfactory. Top up as required. Check the header tank level too and if empty, repeat stage 7.
9)Idle the engine again - long enough for the cooling fan to engage - then turn off. Wait for the engine to cool, then check the header tank level once again, topping up as required.
10)Clean any coolant from the bodywork, as it can corrode plated metal parts. Use soapy water to wash down. Store any remaining coolant securely away from children and animals.
MARAMING SALAMAT BOSS DAHIL DITO MAY SKILL AKO NA ENHANCE KAKATAPOS KO LANG I CHANGED COOLANT AIRBLADE KO. 👌🏻
Great video! Could you please show me how to adjust the throttle free play on my AB 150? Thanks!
Thank for sharing ❤
Wtf with camera man, I’m so dizzy😵💫
Galing mo magchange oil boss. Ty
sa akin boss bumaba ang level ng coolant kailangan po ba dagdagan o magpalit po ng coolant
Boss ano ung gamit mong pang pihit nasira ko na ata ungrubber nung aken iba pala ung isang dulo nung allen wrench mo. Pede pa din kaya mabuksan ung sakin gamit plies?
galing mo mag change oil.
Aloysian here
Ganyan pala mag change oil. Thanks for sharing this kuys. Keep safe always
Kapag ba green yung coolant na nakalagay, pwede bang dagdagan na lang ng green na coolant din kahit iba brand?
Hnde po advisable paghaluin kng d po kayo sure n prehong composition ung coolant n idadagdag mo. Pero kng kunti lng nmn pwede. Ako ngfflushing ako every 2 years..kc habang tumatagal ngbbago nrin ung quality ng coolant.
nice tips bro trending yan pa change oil haha Aloysian
Need ba tangalin ung old coolant?, pwde refill nlng?
Pwede nmn refill lng ggwin mo..pro habang tumatagal ang coolant bumababa din ang kalidad kya mas mganda tlga ang mgppalit..ng coolant
sana all maka change oil heheheh bagong kaibigan po
Tuwing kailan pinapalitan ang coolant paps ilang buwan?
As adviced Boss atleast 2 years bago ppalitan..pero kng s tingin mo nababa na level nya at ngwworry kna sa kalidad ng coolant palitan mo na mura lng nmn..kc habang tumatagal pumapangit ung quality ng coolant..
@@HANDYHUBBY745 kaka bili ko lang ng honda airblade boss kala ko na wawalan sya laman so 2yrs pa pala bago papalitan thanl you sa content mo boss nag karoon ako ng idea
Sana nilagay din kung anong sukat at tools ang gagamitin
Tools needed: 5mm allen wrench,philip screw driver and 8mm socket T-wrench
Astig po ah
maya na ung iba ha
After idrain yung old n coolant, Ilang ml n coolant po kailangan ilagay para mapuno?
Salinan nyo lang po hanggang ung level nya ay maabot ung dulo ng radiator cap o ung takip..tpos ttkpan ppandarin mga 1minute check mo ung level kng ngbbago..follow nyo lng po ung instructions at the discription po..
@@HANDYHUBBY745 500ml lng po kasi nabili kong coolant di ko sure kung sakto n b yon or kulang. Ilang ml po b nakalagay jan s bote ng coolant n nilagay nyo? Airblade user din po ako
@@robertoeulin9508 kasya n po yan
Boss Anu gamit mu na gas ki airblade
Ano size po Ng tools?
Simula ng drinane at pinalitan ng coolant yung honda airblade ko nagooverheat na yung makina. Ano kayang posibleng nangyare dito?
Anong coolant ang pinalit nyo? Try mo rin mag palit ng engine oil mo baka d hiyang s motor mo ung langis n ginamit nyo..tsek mo rin ung radiator nya bka madumi o hnde sya well ventilated kya d nya mpalamig ang coolant..
Parang sa sasakyan lang din po yan baka kaya nag ooverheat kulang ang coolant. Saka dapat ibebleed mo muna kasi once na binuksan mo cooling system ng makina nagkakahangin so dapat ibebleed mo muna para mawala ung hangin and then saka papasok ung coolant from radiator. tas magdadagdag ka uli ng coolant. Kung wala naman leak possible kulang sa coolant lang yan
Thank you for trying to teach the people who don't know to do this.,
but what the hell is doing that cameraman just take the camera and tell that fellow to leave the place and keep ur camera at a chair or something, that it would be more beautiful and easy to watch us... Damn.... Cameraman spoiled the video
Akala ko po sa white na container lang mag rerefill ng coolant. dun din pala sa black
Yearly po mag replenishment coolant. Piro kong sa container dagdag lang ginagawa dyan kong umabot sa LOW. Piro ang normal talaga dyan yearly ang pag palit ng coolant
Pwede ba Top1 coolant boss?
this is ready to use. You can use it with your motorcycle. It is better if you drain your old coolant and fill with top1 power coolant para matanggal lahat ng mga dumi from the old coolant.
Yan ung reply ng TOP 1 boss tnx..
Mukhang ang hirap gawin kaya salute sa mga mechanico