The extensions are UPSIDE DOWN! The bike's riser is supposed to fit into the relief on the top of the extension. The relief/pocket is NOT for the bushing. Order extensions for riser bar size diameter NOT handle bar size.
Thanks for the video! Got mine installed tonight. Cables needed to be moved around a bit to let in some slack but that's about it. They look great and add some nice height. 2016 Harley Low Rider S
I am back here again for 2 inch extension instead of 1 inch i have now. Question about bolt size though... you added 5 inch bolt to do the job and I wonder if I can get away with 4 1/4?
You’re welcome and the original cables are not tight with this 2 inch riser. I haven’t had issues with turning. If you go any higher, the cables will need to be extended.
This might seem like a stupid question but what way up does the recessed end of the risers go? Does the recessed end mate with the end of the handlebars or does it go over the inserts in the top of the triple tree?
Which side is up and down toward triple tree? I just got mine from LA Chopoer and one side is flat and other side has some sort of well (pocket) on them. Comes with no illustration or installatiin manual.
@@djjaimelopez do you have or had any issues with any high speed vibration or anything? I was thinking to use pocket side jointng of the existing bar until watching TH-cam video like yours and others. In addition, the existing washer embedded on top of the triple tree also needs to be removed? I am doing this upgrade tomorrow and hope all is going to be fine.
paul son I don’t have any issues with high speed vibrations and yes the washer was removed. It was a fairly quick install, good luck on yours! Glad to help if any issues arise.
@@djjaimelopez ok. So for the last time before it goes into lift, quick recap then... A) extension has pocket ( well) facing down toward to triple tree B) top washer needs to be removed. Appreciate this
bmac7576 yes I had to use lock tight. I actually had to go back and add it because I didn’t at first and it loosened a bit. No issues after adding lock tight.
@@tyhank453 the ones I got were pretty stout. You def can grab the ones you feel most comfortable with. I haven’t had any issues since installing but again, go with what you feel most comfortable with.
The extensions are UPSIDE DOWN! The bike's riser is supposed to fit into the relief on the top of the extension. The relief/pocket is NOT for the bushing. Order extensions for riser bar size diameter NOT handle bar size.
Thanks for the video! Got mine installed tonight. Cables needed to be moved around a bit to let in some slack but that's about it. They look great and add some nice height.
2016 Harley Low Rider S
Jace Bryan awesome!!
Thanks for This!
You’re welcome
I am back here again for 2 inch extension instead of 1 inch i have now. Question about bolt size though... you added 5 inch bolt to do the job and I wonder if I can get away with 4 1/4?
I’d stick with the 5 inch for a safety piece of mind.
Hi, thank you for your video. the original cables are not too tight after? they do not interfere to turn? thanks
You’re welcome and the original cables are not tight with this 2 inch riser. I haven’t had issues with turning. If you go any higher, the cables will need to be extended.
This might seem like a stupid question but what way up does the recessed end of the risers go? Does the recessed end mate with the end of the handlebars or does it go over the inserts in the top of the triple tree?
The recessed end went downward.
Which side is up and down toward triple tree? I just got mine from LA Chopoer and one side is flat and other side has some sort of well (pocket) on them. Comes with no illustration or installatiin manual.
paul son the “pocket” side went down on mine. My handlebars had a “pocket” that went over the riser. Hope this helps
@@djjaimelopez do you have or had any issues with any high speed vibration or anything? I was thinking to use pocket side jointng of the existing bar until watching TH-cam video like yours and others. In addition, the existing washer embedded on top of the triple tree also needs to be removed? I am doing this upgrade tomorrow and hope all is going to be fine.
paul son I don’t have any issues with high speed vibrations and yes the washer was removed. It was a fairly quick install, good luck on yours! Glad to help if any issues arise.
@@djjaimelopez ok. So for the last time before it goes into lift, quick recap then...
A) extension has pocket ( well) facing down toward to triple tree
B) top washer needs to be removed.
Appreciate this
paul son yes. You’re welcome
Have you noticed excessive wiggle play in the tbars with those extensions combined with handlebar riser?
okay sure, No. It did wiggle a bit once but I added more Lock tight and tightened the bolts. No issues thus far.
What is lock tight?
What kind of sissy bar do you have on? And did you have to do any mods to install it? Thanks in advance.
I have the Standard round bar. The dealership installed it for me when I purchased the bike. They added the detachable latch kit. Yw
Do you get rid of the washers on the tree? Or do you reuse them?
Christopher de Klerk the only washer I reused were the ones on the bolt. Under the riser, I did not re use them.
Did you use any thread locker? Any issues with bolts loosening off?
bmac7576 yes I had to use lock tight. I actually had to go back and add it because I didn’t at first and it loosened a bit. No issues after adding lock tight.
DJ Jaime Lopez good to know, thanks for the vid! Very helpful
bmac7576 you’re welcome
I am ordering the extensions. can you give me the size of the 2 screws?
Thanks 😎
1/2” X 5” Hex Bolt
Did you have to pull your cables up? And untie them from under the tank somewhere to get the extra length needed for the risers?
I did not have to untie them. As I raised up my handlebar, I just pulled up the cables for some slack.
what size of screw to install these risers? Please
1/2” x 5” Hex bolt
@@djjaimelopez thank you, do you have a link i'm french and i can't find in my country thinks
@@gaetansoldiers998 Small Parts B0013769GI 316 Stainless Steel Hex Bolt, Plain Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1, 5" Length, Partially Threaded, 1/2"-13 UNC Threads www.amazon.com/dp/B0013769GI/ref=cm_sw_r_cp_api_glt_fabc_SS555PV991MYPS84T30R?_encoding=UTF8&psc=1
@@djjaimelopez thinks bro
You’re welcome
What grade bolt did you get?
This is the one I got.
amzn.to/3Q4YEF4
@@djjaimelopez man grade 2 😳 Might want to put a higher grade bolt in there. Would be terrible if one of those broke
@@tyhank453 the ones I got were pretty stout. You def can grab the ones you feel most comfortable with. I haven’t had any issues since installing but again, go with what you feel most comfortable with.
@@djjaimelopez nice, ride safe!
@@tyhank453 ride safe as well
Hello! Could you write the exact dimensions of the bolts? i dont know how to find it on ebay!
1/2" x 5" bolt. I purchased them from Lowe's home improvement store.