hiya nice video im just trying to set up the devo 7 with my nighthawk 280 pro iv put my flight modes to my FMD switch can you tell or show me how to set my failsafe to my gear switch and how do you set the end points on this transmitter can you help me out please
Many thanks for sharing, I followed your setting to my Devo F7 with RX703A and Naza- M lite. When I tested on Naza-m-lite Assistant binding Devo F7 everything is working fine as you shown on video but when I tried the Fail Safe test it failed because Assistant never switching from Manual to Fail Safe as you show on video. What is wrong with my Devo setting? In which menu of Devo are the setting for Fail Safe? Thanks in advance!
Hi, I Just purchased the Walkera Devo 7 transmitter to use with some drones I’ll be building; still new to all this. In CleanFlight I was able to set the ARM mode to the GEAR switch on my Walkera Devo 7, but I am UNABLE to set any of other switches on the Devo 7 to any other mode like ANGLE or HORIZON. None of the switches on my Walkera Devo 7 respond in CleanFlight, seems like there are not activated. Is there some setting in the Walkera Devo 7 transmitter that I have to change in order to “free up” one of these switches in order so I can assign it one of the modes in CleanFlight? Appreciate all and any help!
Gutes Video, aber der failsafe Modus funktioniert so leider nicht. Der Copter würde in der Zeit im manuellen Modus unkontrolliert wegfliegen und in kürzester Zeit crashen. Das liegt da ran, das nur Kanal 5 am Empfänger als Failsafe geschalten ist, und Kanal 7 am FC erwartet wird. Alle Kanäle außer Kanal 5 frieren vorerst ein. Ich selber habe bis jetzt noch keine Lösung gefunden wie man das umgeht
Hi, can anyone help me? I want to have a dedicated rtl switch on my devo 7 with a DJI NAZA M LITE. It seems the only way to do so is to have 2 switches working through one channel (correct me if i'm wrong) and i was wondering if i soldered an extra switch directly onto the flight mode switch cables, will it work?
Would you please post a video showing step by step how to program the devo 7 with naza m v2 .appreciate it .
Rất chi tiết, đúng cái mình cần, thanks bạn nhiều !!!
I have done the setup like your Video shows. But the AUX2 dosen´t activate the Gimbal.
What can be wrong ?
Good job man!! My DJI F550 is now prepare to fly. Thank you !!!
hiya nice video im just trying to set up the devo 7 with my nighthawk 280 pro iv put my flight modes to my FMD switch can you tell or show me how to set my failsafe to my gear switch and how do you set the end points on this transmitter can you help me out please
Cài theo xong giờ kênh ELEV xuống không hết
Many thanks for sharing, I followed your setting to my Devo F7 with RX703A and Naza- M lite. When I tested on Naza-m-lite Assistant binding Devo F7 everything is working fine as you shown on video but when I tried the Fail Safe test it failed because Assistant never switching from Manual to Fail Safe as you show on video. What is wrong with my Devo setting? In which menu of Devo are the setting for Fail Safe? Thanks in advance!
hello great video :) I have a question ... if you can speed up the function of the failsafe?
Hi,
I Just purchased the Walkera Devo 7 transmitter to use with some drones I’ll be building; still new to all this.
In CleanFlight I was able to set the ARM mode to the GEAR switch on my Walkera Devo 7, but I am UNABLE to set any of other switches on the Devo 7 to any other mode like ANGLE or HORIZON. None of the switches on my Walkera Devo 7 respond in CleanFlight, seems like there are not activated.
Is there some setting in the Walkera Devo 7 transmitter that I have to change in order to “free up” one of these switches in order so I can assign it one of the modes in CleanFlight?
Appreciate all and any help!
I am a beginner, I used a tx Devo 7, how to connect rx703a with a kiss fc, tq
how does the word naza show up on your transmitter. my transmitter isnt responding with the nm app.
Anh ơi cho em hỏi Control mode switch với Mix switch ioc 2 cái này có tác dụng gì vậy ạ có thể giải thích cho em hiểu không ạ.....
Gutes Video, aber der failsafe Modus funktioniert so leider nicht. Der Copter würde in der Zeit im manuellen Modus unkontrolliert wegfliegen und in kürzester Zeit crashen. Das liegt da ran, das nur Kanal 5 am Empfänger als Failsafe geschalten ist, und Kanal 7 am FC erwartet wird. Alle Kanäle außer Kanal 5 frieren vorerst ein. Ich selber habe bis jetzt noch keine Lösung gefunden wie man das umgeht
So good i start for beginging devo7 to set up i can not fly drone now hope you teach thank you
How are you connection the devo to the pc?
How to videos don't need no music they need to hear what people are saying
Hi, can anyone help me? I want to have a dedicated rtl switch on my devo 7 with a DJI NAZA M LITE. It seems the only way to do so is to have 2 switches working through one channel (correct me if i'm wrong) and i was wondering if i soldered an extra switch directly onto the flight mode switch cables, will it work?
Hi.help settings devo7 and naza h
How to rx705
whats the name of the song?
like n 59.