Do You Have A Mouse Problem? I invented The World's Greatest Mouse Trap - The Dizzy Dunker Purchase on Amazon: amzn.to/3Py9eDF Purchase Directly from the Rinne Website: www.rinnecorp.com/?ref=shawnwoods1 (As an Amazon Associate I earn from qualifying purchases.) FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post. For A List Of My Top Mouse Traps Recommendations Check Out My Online Affiliate Store: www.amazon.com/shop/historichunter (As an Amazon Associate I earn from qualifying purchases.).
The 3d printed mouse trap contest should become a regular thing with entry dates and prizes! It would be a great way to get more interaction from your viewers.
@@eldiantre7346 , I made 7 bottle fly traps and used them for two summers. Added store-bought honey and water. They cought a lot of flies. The problem is, there were always the same amount of flies in the yard. Seems they were coming in from afar. It might be a means of reducing the population over a big area.
Hi everyone! I'm the one that printed these traps for Shawn. While I didn't design any of them, I did customize the spike trap with Shawn's logo. I was skeptical these were going to work very well, but now that I've seen what mice do with them, I think I could improve the original designers' work: 1. All of the tilting traps: add some rare earth magnets to latch it closed. I was actually thinking about adding magnets, but with COVID delaying shipping, it would have delaying finishing these for Shawn. Magnets would be very easy to add though. 2. Spike trap: The original Thingiverse file was corrupted and couldn't be sliced, so I took the concept and basic dimensions and made my own. FDM 3D printing can't make very strong sharp spikes, so I will send Shawn a newer version of the lid that uses metal nails. I think it should be just as effective as the antique with that change. Also, the green lid Shawn didn't test in the video has a much tighter "squeeze" for the mouse to get through. The blue lid was the original Thingiverse design, which I thought was much too open, and sure enough, it was. 3. The exercise wheel trap was submitted for a Thingiverse contest, but the original designer never actually printed or tested it. Someone else mentioned covering the outside to keep mice from spinning it before getting inside, and I think that's a great idea. That one had really loose tolerances that I think I could tighten up to make it less sensitive. All of these were printed in PLA, but it's possible printing with a glass or carbon-filled plastic would discourage them from chewing.
I agree on the exercise wheel, having a cover would help a lot. For the spike trap, maybe if the spikes where printed separately and inserted after so they had a little room to move inward and maybe even a small rubber band to pull them in, though i guess you'd still have the problem of the mice chewing on them.
Good ideas. Definitely needs more narrow needles, the magnet idea sounds great. I made some suggestions for the bottle trap too, basically it needs a way to hold up when the mouse tries to go in, and when it tilts back, have that stand drop away and when it drops back down it falls in place to block the mouse's exit.
I died laughing at the failure of these traps! It was like a corporate project, on discussion table everything is great and works as expected but on application they fail miserably. Thank you shawn, you are the best!
I watch yours all the way through. I understand the reasons to shorten them and I have no problem with that. I wish you much continued success with your channels.
See, the problem is that the mice in Shawn's barns have been unintentionally bred over the past 9 years to be experts at trap diffusion and master chewers. These traps didn't stand a chance against these _advanced rodents_
OK, Spanky. In 5 more years the even more advanced rodents will have kidnapped Shawn and be running his TH-cam channel and showing the videos on how they did it. And TH-cam won't demonetize them.
No, that's not it. In the country there is an endless supply of mice always looking for the kind of shelter a barn provides. City people have no clue how prolific and populous mice are.
To be honest: it's the fact that shawn catches them then releases them. Even though he takes them out into the woods, I doubt they stay there for long. They make their way back and don't fall for the same crap next time lol..... I don't care if they are domestic or invasive, if they're in the barn eating your feed and spreading disease, they need to be dispatched.
Goes to show you millennials who think they are so much smarter than us boomers but those 5 couldn't trap ONE freaking mouse. 20 hrs design time- check 40 hrs print time - check $600 3d printer - check $20 worth of pla - check mice caught - ZERO
@@muskokamike127 no wayt hat was a 40 hour print time, it could be made on cheaper 200$ printers like the ender 3 and that was no where near 20$ of pla
@@diamondaxe8 waaaa you got me. I exaggerated to prove a point. You get a cookie. Don't eat it all at once! Instead of buying a 3d printer you should have bought a sense of humour, you sure need it!!! lol
@@brianlanders5306 we'll see. I copied the pool ball trap and printed it, mine has a cover. Now how to scale it up to rat size? What would be heavy enough??
Those 3D printed mouse traps were like an amusement park for them. :D I think your channel will have more viewers soon. I heard there are a lot of mouse problems even in US and that will bring more people to your channel. Keep up the good work, Shawn.
Well Shawn, some of us found you among the flintknapping videos years ago and still appreciate the long format. I know making short and snappy videos will help grow your audience, but please include some longer videos as well. Your grounded personality and logical approach are soothing in these chaotic times. Like Mr Rogers for adults.
This is precisely why there are so few inventors out there. It's easy to put together something. It's very hard to put together something that's actually good.
I was suprised. When you tested on your pet mice they all seemed very well thought out, theoretically. ' I was even moren suprised that the mice tried to help each other out of the traps. Didn't know that mice were that socially conscious.
Mice are smart little boogers. Some changes I would make: 1. On the wheel, make a guard around the outside so the mice can't spin it from the outside. 2. The pop bottle teeter totter, mix peanut butter and sunflower seeds and drop the clusters into the bottom of the bottle. 3. For all of them, use a stronger filament like PETG or silicon to make it harder for the mice to escape.
I like how shawn always goes in a circle. If you guys remember he used to post monday, Wednesdays and Fridays. But later went to just Monday but longer. I love this channel.
Thanks for showcasing my design (The 1st one)! While it still didn't hold the energetic mice, it held on for the longest time! I like the suggestion of using magnets, but of course often we make do with what most people had at home, heavier weights (more coins) might help. The chewing however ,has been highlighted in the comments (on Thingiverse), but nothing beats those rodent teeth... May I also add, my design has very minimal printed parts (use less material), hence take considerably less time to print. Lastly it is free to enjoy!
I finish all of your videos from start to finish. And I will continue to do so no matter how long or short. Thank you for the awesomeness that you share.
I don't understand why anyone would only watch half the videos. I for one love watching the huge variety of traps being presented. One of the best parts is seeing the wildlife that comes for a free mouse dinner!
"Traps" ROFL! There are very obvious technical reasons why other trap designers prefer to build their traps out of steel instead of such cheap plastic junk.
3D printers are worthless for practical applications. They will get there eventually but they are for nerds to design 89 cent toys with a 500 dollar machine that doesn't always work properly. I am not a fan
@@_Jigen CNC machine = Make anything, from useless to life-changingly practical. They have existed for decades and changed the face of manufacturing. 3D printers are currently a fun plaything. You basically admitted it's a tool to make actual tools through casting. Generally the tolerances needed for a practical cast are not possible with a 3D printer. Again, I'm confident it will get there. Hell they are talking about 3D printing the shelters they build on mars.
As we have seen so many times before, mice usually climb on top of a trap before going inside. So any trap that is triggered by the mouse’s body weight is prone to failure, unless it automatically resets itself when the mouse gets off.
It's not just your channel, It's likely most of them. Mine is auto repair "how to" stuff and my views have dropped by a third since the pandemic. Keep it up, I love Mousetrap Mondays!
Wow! While I'm actually excited to see more content, I'm probably one of the only people who actually got their question from last week answered! I hope the new channel decision helps you out in the long run!
Just so you know I watch your videos until the end. The problem isn’t you it’s TH-cam algorithms and people with short attention spans that have no interest in what your channel is about. You got a solid fan base on here. Don’t stress so much, there’s other ways to earn revenue.
The soda bottle mouse traps worked for me. Also, I see you are about an hour drive from me by way of 99 W. Thanks for the videos. I learn a lot and you save me time and money.
I watch everything till the end. I love your channel. Maybe it is a good idea to post more/shorter content. It gives me more of what I like. : ) Keep up the good work.
I'd love to see a video about tool using rats. Your video about a rat using a stick to set off a trap was amazing. I was unaware that rats actually use tools.
Yay! MTM! We love Shawn Wood's mouse trap videos. Thank you for sharing these creative, albeit un successful mouse traps. It's interesting and entertaining to see how the mice interact with the traps and some times make their escape. We love your videos.
I think that the biggest surprise was that Shawn has a TH-cam channel manager at TH-cam? Wonders will never cease! PS Shawn you do what ever is best for your channel and for you and your family.
Thanks for this video. Reviewers gotta be brutally honest and you showed the truth about these mouse traps. Nobody needs to waste money printing a mouse trap that doesn't work. I don't have a mice problem, but it's really great to see human ingenuity at its best (or this time, its worst)
The main reason I started watching this videos was because they were short, on time where every channel wants to release 15+ minutes of video. The change is very welcomed!
thank you for making these i sometimes get mice and your channel has been a great resource for being able to catch them so they dont make a mess and keep them as pets or release them at another location like in my neighbors house. love the vids keep it up and stay safe!
Lately due to the coronavirus and having some rats again in my woorshed i've been watching your channel alot ! It's so awesome how many time you spend revieuwing al those traps. You also inspired me buying a trailcam nog this week it arived and boy did'nt i know how many life there is around my traps without the rats getting caught and i thought i was catching good !! I discribed to the channel ind that is not something i do quit often !! Greets from Belgium !
Do You Have A Mouse Problem? I invented The World's Greatest Mouse Trap - The Dizzy Dunker
Purchase on Amazon: amzn.to/3Py9eDF
Purchase Directly from the Rinne Website: www.rinnecorp.com/?ref=shawnwoods1
(As an Amazon Associate I earn from qualifying purchases.)
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
For A List Of My Top Mouse Traps Recommendations Check Out My Online Affiliate Store: www.amazon.com/shop/historichunter (As an Amazon Associate I earn from qualifying purchases.).
i told my dad about you :3
That’s what I call the bottles... Pop bottle. That’s awesome. Great video and content
I'm literally printing the better mouse trap right this min I found evidence of mice in my garage so I'm putting it to the test
3d printed traps? More like 3d printed amusement park for mice.
Almost like Disney Land
I was about to post a similar comment, but this comment says it all.
Lol!!!
Amusement Park/Food Court, Free Admission!
I think they either try to help, or they eat each other. Must probably depend on if they're family or not.
Disneyland and DisneyWorld are both closed because of the corona panic. So, I guess this is the closest we'll get to an amusement park with mice.
lol
Haha
yep
The 3d printed mouse trap contest should become a regular thing with entry dates and prizes! It would be a great way to get more interaction from your viewers.
That's a good idea. Not just mouse traps he could do wasp and fly traps too.
@@eldiantre7346 , I made 7 bottle fly traps and used them for two summers. Added store-bought honey and water.
They cought a lot of flies. The problem is, there were always the same amount of flies in the yard. Seems they were coming in from afar. It might be a means of reducing the population over a big area.
I like it. With brackets and everything
Great idea. What prizes will you provide?
Hi everyone! I'm the one that printed these traps for Shawn. While I didn't design any of them, I did customize the spike trap with Shawn's logo. I was skeptical these were going to work very well, but now that I've seen what mice do with them, I think I could improve the original designers' work:
1. All of the tilting traps: add some rare earth magnets to latch it closed. I was actually thinking about adding magnets, but with COVID delaying shipping, it would have delaying finishing these for Shawn. Magnets would be very easy to add though.
2. Spike trap: The original Thingiverse file was corrupted and couldn't be sliced, so I took the concept and basic dimensions and made my own. FDM 3D printing can't make very strong sharp spikes, so I will send Shawn a newer version of the lid that uses metal nails. I think it should be just as effective as the antique with that change. Also, the green lid Shawn didn't test in the video has a much tighter "squeeze" for the mouse to get through. The blue lid was the original Thingiverse design, which I thought was much too open, and sure enough, it was.
3. The exercise wheel trap was submitted for a Thingiverse contest, but the original designer never actually printed or tested it. Someone else mentioned covering the outside to keep mice from spinning it before getting inside, and I think that's a great idea. That one had really loose tolerances that I think I could tighten up to make it less sensitive.
All of these were printed in PLA, but it's possible printing with a glass or carbon-filled plastic would discourage them from chewing.
I agree on the exercise wheel, having a cover would help a lot. For the spike trap, maybe if the spikes where printed separately and inserted after so they had a little room to move inward and maybe even a small rubber band to pull them in, though i guess you'd still have the problem of the mice chewing on them.
Good ideas. Definitely needs more narrow needles, the magnet idea sounds great. I made some suggestions for the bottle trap too, basically it needs a way to hold up when the mouse tries to go in, and when it tilts back, have that stand drop away and when it drops back down it falls in place to block the mouse's exit.
Hey man, we don't want technical excuses. Do it again, and this time they better work. ;)
Oh nice! How long it take?
@@cannonball666 lol
I died laughing at the failure of these traps! It was like a corporate project, on discussion table everything is great and works as expected but on application they fail miserably. Thank you shawn, you are the best!
👍👍👍
sarigiannis ioannis
Ha
Exactly
😂😂🤣🤣🤣💀
I watch yours all the way through. I understand the reasons to shorten them and I have no problem with that. I wish you much continued success with your channels.
"And the winner is..." It's still a loser.
"Its a soda bottle"
"well i say pop bottle"
Me: *Its a bottle.....*
A water bottle? A beer bottle? Sobe bottle? What kind of bottle, they all are made with different shapes, materials and designs.
@@Sotike sobe?
@@Sotike a plastic bottle
@Sotike
「insert the incredibles "bottle is bottle" caption」
It’s a pop bottle
See, the problem is that the mice in Shawn's barns have been unintentionally bred over the past 9 years to be experts at trap diffusion and master chewers. These traps didn't stand a chance against these _advanced rodents_
Pinky and The Brain
OK, Spanky. In 5 more years the even more advanced rodents will have kidnapped Shawn and be running his TH-cam channel and showing the videos on how they did it. And TH-cam won't demonetize them.
No, that's not it. In the country there is an endless supply of mice always looking for the kind of shelter a barn provides. City people have no clue how prolific and populous mice are.
They leveled up lol
To be honest: it's the fact that shawn catches them then releases them. Even though he takes them out into the woods, I doubt they stay there for long. They make their way back and don't fall for the same crap next time lol.....
I don't care if they are domestic or invasive, if they're in the barn eating your feed and spreading disease, they need to be dispatched.
I will start posting shorter videos twice a week (Monday & Friday). Thank you so much for your support.
Shawn Woods I love your videos
I’ve been subscribed for a while now
You said you were going to try and not get a black nail!
Love your videos!
Your videos are awesome do you think I could get a shout-out and you next mousetrap Monday video?
The mice: "We ain't fallin for no punkass traps!" lol
Goes to show you millennials who think they are so much smarter than us boomers but those 5 couldn't trap ONE freaking mouse.
20 hrs design time- check
40 hrs print time - check
$600 3d printer - check
$20 worth of pla - check
mice caught - ZERO
Mice: "They don't make 'em like they used to, in fact Joe was caught last week in a 100 year old one."
@@muskokamike127
👍
@@muskokamike127 no wayt hat was a 40 hour print time, it could be made on cheaper 200$ printers like the ender 3 and that was no where near 20$ of pla
@@diamondaxe8 waaaa you got me. I exaggerated to prove a point. You get a cookie. Don't eat it all at once!
Instead of buying a 3d printer you should have bought a sense of humour, you sure need it!!! lol
I enjoyed this a lot and was not surprised by the outcome. I'm still waiting for the "Mouse Cannon", LOL! Stay safe and well my friend!
I want to create one that uses compressed air and the "trap" is like the skeeball games at arcades.....various rings with points lol....
Glad to see any videos from my favorite TH-cam channels. You are the tops, helping us pass the time during this virus. Thank you.
That was like watching something out of a jail break series LOL
change the title to "Setting Up Five 3D Printed Mouse Feeding Stations In The Barn" !!! Fun designs though
👍
I'm sure 3d printing has its purposes, but not for these sort of traps. You just can't beat metal as for mouse and rat traps.
@@brianlanders5306 we'll see. I copied the pool ball trap and printed it, mine has a cover. Now how to scale it up to rat size? What would be heavy enough??
I think someone at TH-cam is gaslighting you, Shawn. I watch your videos from start to finish!
Michael Powers what does that mean.
"Some people have a problem with me calling it a pop bottle, anyways so the pop bottle..."
In Canada basically everyone calls them pop bottles and I wouldn't be surprised if they also call it pop in the northern states
In Michigan we call them pop bottles
sam clarke in Nebraska we call it pop
In Wisconsin, we call them soda bottles
Hey guys btw, what do you call it? bubbler or water fountain? we use bubbler here in Wisconsin.
@@samclarke899 In Washington state its soda.
The pet mice: The places I go for a paycheck.
Hey Shawn, thanks for the transparency about changing your videos. Keep up the great work. Always enjoy watching your content.
Those mouse traps are like a playground
5:09 man I knew this guy was old-fashioned, but holy crap! A flip phone? Havent seen one of those in a while lol
5:09 flip-phone light. Shawn Woods RULES!!!
You would expect otherwise from the man infamous for giving things a little flip?
Those 3D printed mouse traps were like an amusement park for them. :D I think your channel will have more viewers soon. I heard there are a lot of mouse problems even in US and that will bring more people to your channel. Keep up the good work, Shawn.
It looked like a Mouse Amusement Park hahaha I saw alot of team work and escape artists, great viddy....
Well Shawn, some of us found you among the flintknapping videos years ago and still appreciate the long format. I know making short and snappy videos will help grow your audience, but please include some longer videos as well. Your grounded personality and logical approach are soothing in these chaotic times. Like Mr Rogers for adults.
No doubt the mousies appreciated their new enriched environment, at least. Plenty of safe toys!
5:10 What in tarnation is in your hand, I got flashbacks from 2005.
We call it "pop bottles" too, Shaun. Everyone I know in Michigan calls it that.
Scamazon Prime I’m in Australia, we call them soft drink bottles. But a bottle’s a bottle.
True Americans call them soda bottles.
Michigan, Ohio, N. KY eastern Indiana....POP!
I moved to FL. from Michigan soda is the norm. It was hard to adj.
@@DeadPool-wi6hk LOL I DIED READING THAT
Shawn,
Thanks for the fun time... We really enjoyed ourselves!
~mice
I always watch till the end, but looking forward to seeing more videos, more often.👍
LMAO @5:19 They having so much fun he spun the big wheel like he's on the price is right.
Spoiler Alert: Shawn is gonna "give it a 'lil flip"
Its like training the mice for being a great escape artists, they are really very intelligent
This is precisely why there are so few inventors out there. It's easy to put together something. It's very hard to put together something that's actually good.
👍👍👍
Mice: see a ton of weird things next to each other. Also mice: seems legit
thank you Daddy Shawn. For this video, you are a guardian of savage mice :)
Thank you for doing what you do! I love your channel and will continue to watch! :) I always look forward to Mousetrap Monday!
Im waiting for that every week
I realy like mouse monday keep up 👍
4:30 I think the spikes will get chewed off, and the side tilt door will get lifted. The others should work okay.
Shawn, you are correct, it’s called a “pop-bottle”.
No soda bottle
imachiken no, bottle
plastic bottle
Where I live it’s soda bottle
That's a plastic make to look like a bottle
Dude I’ve watched all your videos till the end. They’re so good and very informative. This is one of the Golden channels of youtube.
Fail X 5 , back to the drawing board guys, just loved watching all this inguinuity.
I watch all yr videos Shawn and from the begining to end... I love all of them. Wish you and yr family love and light💗🌹👊😁
These aren't traps, they're mice playgrounds!
I was suprised. When you tested on your pet mice they all seemed very well thought out, theoretically. '
I was even moren suprised that the mice tried to help each other out of the traps. Didn't know that mice were that socially conscious.
Hi-tech meets real world. This video's got a Jurassic Park type feel to it.
These are pretty low-tech. If they actually had a sensor inside and a servo-controlled door, they might have worked better.
Holy 2005 batman! 5:10
Props for still rocking a flippy phone
The spiked one they would likely just chew the tips off then get out.
Mice are smart little boogers. Some changes I would make:
1. On the wheel, make a guard around the outside so the mice can't spin it from the outside.
2. The pop bottle teeter totter, mix peanut butter and sunflower seeds and drop the clusters into the bottom of the bottle.
3. For all of them, use a stronger filament like PETG or silicon to make it harder for the mice to escape.
And when asked, which one is the best? "None" I said. Weeeee. Winner.
Love your videos bro! I’m a full time pest control man, it makes me happy to see a few mice get away once in a while!
Day 87: We found out mice are much smarter than we thought
...and they're watching us from the shadows!
I like how shawn always goes in a circle. If you guys remember he used to post monday, Wednesdays and Fridays. But later went to just Monday but longer. I love this channel.
Nobody:
Mices: hey guys we got new toys
Great ideas, little tweaking needed. Thanks for creating them, and giving them to Shawn to share👍
I love seeing how gullible mice are, it's hilarious
Yet they beat all of these traps.....
You mean you are proud that you are more intelligent than mice. Well, OK. Congrats on your outstanding accomplishment.
@@floyd2386 dude, I made this before I saw the traps in action
Thanks for showcasing my design (The 1st one)! While it still didn't hold the energetic mice, it held on for the longest time! I like the suggestion of using magnets, but of course often we make do with what most people had at home, heavier weights (more coins) might help. The chewing however ,has been highlighted in the comments (on Thingiverse), but nothing beats those rodent teeth...
May I also add, my design has very minimal printed parts (use less material), hence take considerably less time to print. Lastly it is free to enjoy!
If you guessed "none", you were pretty close.
I finish all of your videos from start to finish. And I will continue to do so no matter how long or short. Thank you for the awesomeness that you share.
"posted 9 seconds ago" holy moly
I don't understand why anyone would only watch half the videos. I for one love watching the huge variety of traps being presented. One of the best parts is seeing the wildlife that comes for a free mouse dinner!
3d printed mouse playhouse buffet 🤣🤣
This channel is one of the FEW that puts out videos I watch from start to finish
"Traps" ROFL!
There are very obvious technical reasons why other trap designers prefer to build their traps out of steel instead of such cheap plastic junk.
Yeah, this plastic are just good as prototype model than actual trap
3D printers are worthless for practical applications. They will get there eventually but they are for nerds to design 89 cent toys with a 500 dollar machine that doesn't always work properly. I am not a fan
@@_Jigen CNC machine = Make anything, from useless to life-changingly practical. They have existed for decades and changed the face of manufacturing. 3D printers are currently a fun plaything. You basically admitted it's a tool to make actual tools through casting. Generally the tolerances needed for a practical cast are not possible with a 3D printer. Again, I'm confident it will get there. Hell they are talking about 3D printing the shelters they build on mars.
As we have seen so many times before, mice usually climb on top of a trap before going inside. So any trap that is triggered by the mouse’s body weight is prone to failure, unless it automatically resets itself when the mouse gets off.
👍
All these traps are fails lol
👍
Thanks for the conclusion. I don't know what we'd do without your help.
It's not just your channel, It's likely most of them. Mine is auto repair "how to" stuff and my views have dropped by a third since the pandemic. Keep it up, I love Mousetrap Mondays!
Just as I expected, none of them work. No offense to the designer of these traps, but I feel like he leant too much on style and less on practicality.
I'd say the problem is not catching the mice but keeping them in the traps.
"In theory"
Wow! While I'm actually excited to see more content, I'm probably one of the only people who actually got their question from last week answered! I hope the new channel decision helps you out in the long run!
Just so you know I watch your videos until the end. The problem isn’t you it’s TH-cam algorithms and people with short attention spans that have no interest in what your channel is about. You got a solid fan base on here. Don’t stress so much, there’s other ways to earn revenue.
Yay more videos!! Wonderful news. Great videos Mr. Woods.
The soda bottle mouse traps worked for me. Also, I see you are about an hour drive from me by way of 99 W. Thanks for the videos. I learn a lot and you save me time and money.
I watch everything till the end. I love your channel. Maybe it is a good idea to post more/shorter content. It gives me more of what I like. : ) Keep up the good work.
I'd love to see a video about tool using rats. Your video about a rat using a stick to set off a trap was amazing. I was unaware that rats actually use tools.
4:50 - SUUUPER!!! Very effective traps))) LOL
My kids and I enjoy your videos and see them regularly. Good luck with the changes to your channel.
We love your channel Shawn! Thank u for your content. My kids love it.
Great vids and I always watch til the end!
Me and my dad always watch your videos when you upload :). Love your content!
Shawn,
Keep up the good work you are doing! Your creative content is well done and I find your videos informative and educational. Thank you.
Yay! MTM! We love Shawn Wood's mouse trap videos. Thank you for sharing these creative, albeit un successful mouse traps. It's interesting and entertaining to see how the mice interact with the traps and some times make their escape. We love your videos.
I think that the biggest surprise was that Shawn has a TH-cam channel manager at TH-cam? Wonders will never cease!
PS Shawn you do what ever is best for your channel and for you and your family.
Awesome video! Great idea! Shorter videos and more of them. Thanks.
Hey Shawn I'm a huge fan of your content. Thank you for always teaching me something new. Keep up the amazing work
Thanks for this video. Reviewers gotta be brutally honest and you showed the truth about these mouse traps. Nobody needs to waste money printing a mouse trap that doesn't work. I don't have a mice problem, but it's really great to see human ingenuity at its best (or this time, its worst)
The main reason I started watching this videos was because they were short, on time where every channel wants to release 15+ minutes of video. The change is very welcomed!
We'll watch your vids regardless of length. Hang tough brother!
thank you for making these i sometimes get mice and your channel has been a great resource for being able to catch them so they dont make a mess and keep them as pets or release them at another location like in my neighbors house. love the vids keep it up and stay safe!
Funny watching the mice set the traps off.
Hope your family are all well during these difficult times.
Stay safe and well.
Hope the new format works! We will watch the entire thing no matter what you post.
You keep posting, I'll keep watching.
Thank you 👍
Every week I look forward to your videos, thank you.
I like you man it's a random late night binge watch for me
Great to see all the new traps on three Dee! 👍🏾😀❤️🇺🇸
5 min is great, especially on mobile... keep it up , we love it in the U.K.
I have put out a modified version of the bottle swing-door with a hole for a 5 mm magnet and the other side I use a washer. Works every time now
Lately due to the coronavirus and having some rats again in my woorshed i've been watching your channel alot ! It's so awesome how many time you spend revieuwing al those traps. You also inspired me buying a trailcam nog this week it arived and boy did'nt i know how many life there is around my traps without the rats getting caught and i thought i was catching good !! I discribed to the channel ind that is not something i do quit often !! Greets from Belgium !
shawn, i love your videos, especially the long ones.
The mouse spending an hour in real time fiddling with the trap to help its buddy was the most fascinating thing I got from this video. Crazy.