ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2022
- In this video I have some equipment issues and rodents are the cause. I clean up a huge brush pile with the Kioti tractor and the Wallenstein chipper. And we end the days with some trout and fiddleheads. Maybe a cold one to wash it down. A great day at the cabin.
- แนวปฏิบัติและการใช้ชีวิต
![[TH] 2024 PMWC x EWC Group Stage Day 2 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/vwIQyCmNIBU/mqdefault.jpg)
My Father said the same thing he loved Sears and Roebuck appliances and lawn equipment. Kenmore
craftsman made the best stuff back in the day!!
Definitely a Maine meal and delicacy! 🍺🍺
Food looks great.
Hope all is well. Haven't seen a video in a few weeks. Just checking in. God Bless
I love fiddlehead
Can’t wait for your next video Dale!!
Hi Dale…..you ROCK
Always enjoy your vids
I like the M & P cap!!
Oh man! Plum jam is the best!
HAHAHAH I had that exact same Lawn Mower Dale. A real work horse.. Mowed a 1 Acre Area of Lawn in the Spring and Fall with it for clean up with the bagger. It had better lift than the Garden Tractor.
My new place in the Woods does not have a Lawn to mow. Got rid of all Lawn care stuff...
Thanks Mike M.
Thanks for the video!
Love your video keep it up
You are one good cook
Welcome back Dale
Make sure the surface of the tank in very clean and use some JB Weld. I might even use a little square piece of mesh drywall tape over the hole to prevent the JB Weld from going in the tank.
I used jbweld on a Harley tank and it worked for years.
I do believe makes a Jb weld gas tank repair kit , clean it really well it should work.
I have a plan and JB weld should work. thanks.
Great video Dale!
You know things are bad with the price of gas when even the squirrels and mice are trying to steal some out of your tiller! :)
I remember years ago, a squirrel ate through the rubber gas tank fill pipe on my first car. I pulled into the gas station to fill up, and gas started spraying out the bottom of my car. I looked underneath and saw the same chew marks on the fill pipe going to the gas tank. I got my revenge come squirrel season that year!
LOL! 🤣 That's a good one. I left a couple 5 gal gas cans outside one night and a bear used them as chew toys. Gas was cheaper then...
Great video
Jb weld plastic weld good stuff dale
Nice video NB.
Try some JB weld to fix that gas tank. Should work. Just makes sure you sand the area around the hole and make sure the area is clean before applying the JB weld. It should work for you.
Let's hope you can fix that gas tank with some JBweld. I'd love to try fiddleheads someday and that trout sure looked good.
Hope you had a good 4th!!!
👍 Thanks :-)
JB weld, for the tank and your choice of a freedom stick for the tree rat that put the hole in the tank…
Stay safe brother and god bless
Cheers 🍺
Good stuff 88 👍😃✌️🇺🇸
Merrell mushrooms are a great meal
Dude,
That is one serious wood chipper!
I'll trade you a dish of elk burger,brown rice with taco seasoning and sauce for some trout and fiddleheads !!! Eat hearty Dale 😉
I think we got us a trade! 🍺
Greetings !
Try some mesh and Flex Seal paste. That stuff works great.
I'd say you got a squirrel chewing the tank. They will do serious damage on the tractor or just about anything else that is around. The only real fix I have found is to trap or shoot them. If you aren't there all the time you would be lucky to catch one for a shot. Mice can do damage to the wiring on your tractor too. Rodents, varmints are part of the landscape. I do get a bit of a break living on the Bay of Fundy when it comes to flies. Our season runs about 2 to 3 weeks later in the spring, we usually have a stiff sea breeze, and of course we have fog. Fiddle heads have been out here for a week or so but I can't touch the size of your trout. Wherever your hole is I'd keep it quiet, around here people drive out from the populated areas and scavenge the countryside.
Great video Dale! Happy to see you doing what you love
Thank you for sharing and the APPRECIATION
That's my problem is the cheap mower decks. The engines still run. Every few years swapping engine to different mower deck. I had people tell me a mower deck will hold and move a chevy 350. Not the ones I find for free.
Hea Dale been missing your videos. Any coming up soon.
For those who are interested, fiddleheads are newly emerging ostrich ferns. They only last a few days to a week in the edible stage.
Love to see you get showed in at the cabin for weeks on in.
Try JB Weld to fix the tank !
Fiddle heads and trout and cold beer.Wow
Hey Dale. Beautiful day for outside yard management. Delicious looking meal you fixed. Take care.
thanks for posting a video, Dale!
Hi Dale !....enjoyed the video!... That chipper is awesome!... You definitely got your monies worth with the Craftsman mower!...One pull after all these yrs is very rare!....The trout looks great....Take care!
Fiberglass for automotive repair for the gas tank
Hi Dale. Good to see u again. Weather in U.K. is getting better but it’s been a cold spring. Your trout & fiddleheads looked really good. Good to see u working on the property & getting it right for summer. 😁
NB88 is #1 ❤️💪🇺🇸🏆🏆🏆🏆🏆🍺🍺🍺😁
I miss the fiddleheads, the trout, the needhams, the people and so much more about the County. The one thing I don't miss is the bugs. They are the price you pay for paradise LOL.
lol...you got that right! I always say to people "what would life be like here in the summer without the bugs? Paradise."
@@NB88 In the White Mts we used to call Black Flies the state bird of New Hampshire. There was a store in Gorham NH near Bethel Maine that sold Tee shirts that said: Black flies don't Bite, they Suck" LOL I am also reminded of a bumper sticker that the Caribou Chamber printed in 1977. It said: "there is no intelligent life south of Houlton". We all had them leaning temporarily inside the back windows of our cars but never put them permanently on our bumpers because we all shopped in Bangor LOL LOL
I was just wondering today when you were going to do a fiddlehead video! Glad I got the notification!
looks delicious! The moskitos are in a record number over here also! take care!
Looks like you’re doing well my friend. You take care and as always I look forward to your videos!
Good Deal Dale, looked like a great meal. Heading up to Bucksport to our camp on the lake right now actually. Shove off is 5am. Always enjoy your videos.
There’s an old folk song from New Brunswick called‘Fiddleheads and Gaspereau’
Good to see you Dale. Once it gets warm they will attack you for sure.
Great video. I would love to try the fiddleheads. As far as the gas tank try JB Weld. God bless and keep safe
Great to see you again!
Thanks for stopping by as always. 🍺
JB Weld definitely will patch the tank. Great wood chipper. Hopefully the black flys are gone soon for you.
Another idea could be to drill the hole out with a uni bit to a known size and then use a plug of some kind?
JB weld for plastic should fix that hole in your gas tank
We have Christmas fern fiddleheads, here in Ohio. They are about the same as what you've got but ours are furry looking. Ive personally never tried them, though the old timers say they are edible. We've got the black flies here too. It seams like you slap one and four more show up to see what's going on. I hope you get your tiller figured out. We must be about three weeks (or so) ahead of your planting season, as we have our garden in and have blooms on our tomatoes already. Keep safe up there and I'll be looking forward to your next video.
I'm gonna go north one day so I can try me some fiddle heads.. yes sir added to the bucket list 😄
People either love fiddleheads or they hate them...I would say the closest thing in taste would be asparagus.
👍
Bazooka Joe bubble gum & duct tape
to fix the tiller tank use a tube of the < right stuff> its called
Dale jb weld makes a good two part epoxy for plastic. Would be my choice. Black Flys bad in the lower Adirondacks too.soon the blasted checker wings.
Epoxy and some fine screen. Love late spring early summer but the bugs drive me crazy.
If you are looking for content. Do videos on picking the fiddleheads and what you use for trout fishing. Good stuff buddy. Keep the vids coming.
Would like to see fishing some too if you have time.
I have had good luck with a product called Seal All. I have used it many times for sealing fuel leaks. Once I even sealed up an old brass float in a tractor carburetor as a temporary fix. It held for 2 years with no issue then sold the tractor. It comes in a yellow tube with red lettering. Like a metal rtv silicone tube.
What the heck is a fiddlehead? I have never. What’s it taste like? Looked good though. Thanks for the shout out Dale!!
the trout and fiddleheads looked mighty tasty there eh! Thanks for sharing
yes sir.... you must be getting some fiddleheads over your way? How's the back?
@@NB88 Found out I have lumbar spinal stenosis... at least now I know what the issue is and working on what I can do help with it... haven't been out looking for fiddleheads yet lol...
Heya,
Ive had fiddleheads before
And ive been killing mosquitoes inside the cabin already.
BigT,Alaska
Get yourself some aluminum thin gauge metal sheets at lowes/Home Depot. Measure the sides and cut a length of both sides of the motor. Drill some holes and then pop rivet the aluminum to the sides from the inside of the mower deck. I did this with an old MTD push mower that I’ve had forever. I went through all of this effort because this thing consistently fires up after the second pull for the past 18 years. Be sure to sand and paint using some rust oleum paint Before you pop river the aluminum to the inside. You can make that mower another 5-10 years.
Maybe fiberglass for the mower? That said, ours has plenty of holes in it, just close your eyes when the rocks shoot out 😆
I have a Craftsman riding mower and a Craftsman push mower and you can't bet then
Good to see you back on the tube again, Dale. It's been a while. Spring time is in full swing for sure.
Is it possible the tiller gas tank was chewed on by a bear? I know those over-sized vermin like gas tanks on anything they can get at. Anyway, I hope you'll be able to find a fix for it.
I like the hand tool attire shading your noggin. LOL!
Take care and stay safe.
I didn't have good luck with jb weld. They sell a tube epoxy like a two-part putty. You knead it till it starts getting warm put it over the hole quick. It is made for gas tank repair.
I always put a little bit of white vinegar on my fiddlehead greens and butter. Ya can't beat them. The chipper does a great job.
That's another good way to have fiddleheads...add a little vinegar.
The other comments are good ones flex seal is also a great product but nothing on gas is gonna hold
Hmmm... New favorite piece of equipment... I'd guess one of these 3 things... Log winch, grapple or box blade. Grapple is def the most useful...
Well I'll give you a hint it's none of the above but man I sure would love to have a logging winch. It might even make it to number 1. 🍺
Dale, we miss you buddy. Hope you're doing well.
Me too bud. Hope dale is ok love seeing his videos every week.
I miss Sears too. I had a craftsman that lasted years. Needed a new mower and got a Troy Built. The motor blew after one season. Got my money back but looking for a new mower.
Got my craftsman. Works great. Maybe flex seal to fill that hole
JBWeld all automotive stores carry it
Zinc metal patch use liquid nails as adhesive for repair on the gas tank.
I got a shit load of fiddle heads. I’ll have them for months this year
Great video. I’m remodeling a cabin from the 1800’s on my remote piece of heaven. Not easy but worth every bit. I’m starting a channel too. Take care my friend, greeting from the New England Region.
That's pretty cool and that's an old cabin. Good luck with it and the channel. 🍺
@@NB88 thank you very much!
Well if you let grass accumulate on the bottom of the mower it will rust out. If you get a new one, try cleaning it up after mowing. and store it out of the weather.
Great point! I do keep it inside but I should have been cleaning it up after mowing.
Hey Dale the Maine Woods channels recent video is offering you moose antlers. Not sure if you saw it. He mentioned you in this new video.
I have that same tiller in red but the transmission is shot. The tank is most likely the same if you want it. I’m in Pa and could mail it. Let me know.
Try J-B Weld TankWeld.
Dave use jb weld 👍🏿
I love steamed fiddleheads with buttah and a bit of vinegar. Awesome. How is everything going up there in the County?
Or flex seal tape.
Plastic weld or 5 min epoxy for the tank
Not sure if fiddle heads grow here or not (Newfoundland)
You coming back to TH-cam or did they remove your channel ?
i would take a small piece of metal tocover the hole and jb weld it
🇺🇸🇺🇸💪🏻🏃🏻♂️👍🏻👍🏻✌️✌️🎇🎆 HAPPY FORTH OF JULY 🇺🇸🇺🇸❤️❤️❤️❤️
🤷🏻♂️🤷🏻♂️🤷🏻♂️🤷🏻♂️MISS YOU 😃 HOPE EVERYTHING'S. OK ✌️
Fiberglass repair kit
Quite a sometimes ago you put up a video. How are you doing? Everything alright in your part of the world? From Singapore,take care.
Hey is every thing okay. Missing your videos