Installing an Architrave in Under 14 Minutes

In this video Tony shows you How To Fit an Architrave
He starts off by measuring the margins on the previously finished architrave and uses those measurements to mark out where the linings will be installed
Next Tony measures out the plinth and begins to make his cuts, then screws in the bottom plinth blocks. The architraves are then measured to the appropriate length and cut to fit each side of the door.
Then Tony nails the architraves flush along the side, its time to glue the the top of the architrave to the sides, securing it with 4 small nails.
Lastly Tony taps in the last few nails along the architrave to secure it and the job is done
Tools
_________________________________
Pencils: amzn.to/3k6vw24
Tape Measure: amzn.to/3DNNBID
Hammer: amzn.to/3NnkSyy
Nails: amzn.to/3vVTqzT
Sliding Saw: amzn.to/3UkUo2L
Combination Square: amzn.to/3kb0TZz
Festool: amzn.to/3X4SRj9
Wood Glue: amzn.to/3XkNufB
Paslode: amzn.to/3No5qlH
_________________________________
For all our socials! ▶linktr.ee/buil...
_________________________________
#constructionuk #constructionvlog #installationguide #howto #howtoinstall #diy
#architrave #carpentry #carpentrytips #carpentrytools #carpentrywork #carpentryskills #carpenter #carpentervideo
The following music was used for this media project:
Music: Rock Guitar Intro 07 by TaigaSoundProd
Free download: filmmusic.io/s...
License (CC BY 4.0): filmmusic.io/s...