You sweep angles with a caliper to get accurate hole locations... then you drill them not clamped, so the holes can wander all over. I appreciate your sharing. I will also try to save you a little grief. I've spent a lifetime around industrial stuff, I'm no safety nazzi. But drilling holes unlamped like that is easily on the top 10 list for most common "-ooh!" close call moments. I've known quite a few people with significant hand injuries (does the phrase "gutted my thumb muscles" turn your stomach like it does mine?). I had many a close call myself, before I said, "you know, it's really not much more work to always have 2-3 c-clamps by the drillpress and a drill vice." Tip: a rubber or plastic mallet is handy for getting the vice moved that last little bit to align with your hole location.
Regards! Very nice one. I will try it with roller down and motor up, to save the motor from eventual water cooling feature. The up-down movement was a hard thing for me to figure out. I will use your principle combined with ballscrew to count the revolutions as milimeters! Thanks again!
The build is a surface sander, not a surface grinder. The latter requires being able to move in and out along the Y axis in order to surface the entire width of the workpiece with the lowest point of the "grinding" wheel. While this modification will allow cleaning up surfaces, it neither ensures flatness of a surface nor precise thickness when both sides are sanded.
@@mannsdan I need to build a 6,000 sq. ft. workshop to house all of the machinery and tools I'm accumulating and have plans to purchase. I own several acres of land, but the property is 30 minutes from my current home. My wife is growing increasingly annoyed and wants me to build a new home on the remote property, but I need high speed internet and that won't be available there until 2026 (at the earliest).
@gaiustacitus4242 oh my goodness what a conundrum! I've been looking for property for years. The price of land has gone through the roof in my area lately and it's hard to justify spending a fortune on land and leave little left to build a house with! Best of luck brother!
You sweep angles with a caliper to get accurate hole locations... then you drill them not clamped, so the holes can wander all over.
I appreciate your sharing.
I will also try to save you a little grief. I've spent a lifetime around industrial stuff, I'm no safety nazzi. But drilling holes unlamped like that is easily on the top 10 list for most common "-ooh!" close call moments. I've known quite a few people with significant hand injuries (does the phrase "gutted my thumb muscles" turn your stomach like it does mine?).
I had many a close call myself, before I said, "you know, it's really not much more work to always have 2-3 c-clamps by the drillpress and a drill vice."
Tip: a rubber or plastic mallet is handy for getting the vice moved that last little bit to align with your hole location.
Drilling the big piece unclamped at 1:20 gives me nightmares
thank you for making and put the video on yt.
great idea and very suitable for knifemaking especially small folding knife blades.
Regards! Very nice one. I will try it with roller down and motor up, to save the motor from eventual water cooling feature. The up-down movement was a hard thing for me to figure out. I will use your principle combined with ballscrew to count the revolutions as milimeters!
Thanks again!
That is awesome, enjoy your talent
Masterfabrication! 😊👍
Very clever! Well done!
Thank you!
Love your editing style. No fluff, just cut-mark-punch-grind- produce part.
Great work. We shared this video on our homemade tools forum this week :)
Holding the square stock in the split collar, brilliant.😮😮😮😊
Great design!
Its mesmerizing watching someone operate a lathe, and a mind F to watch a hole being drilled while the lathe spins and the bit is stationary.
Best! 🙌🏽🙏🏽
it's beautiful job
Friggin awesome!
Very cool!
This seems plenty good enough for most knives, but not super high precision.
nice one I just have a feeling that you had to grind the sliding table first so there is some kind a flathes...
Looks brilliant… Any chance you can advise me as to what motor your using here, eg HP etc … Thanks
The build is a surface sander, not a surface grinder. The latter requires being able to move in and out along the Y axis in order to surface the entire width of the workpiece with the lowest point of the "grinding" wheel. While this modification will allow cleaning up surfaces, it neither ensures flatness of a surface nor precise thickness when both sides are sanded.
That was GREAT :-) I really like your videos.
you get a sub for that, great job!
Fantastic work! Subbed!
Pretty damn cool.
👌👌👌
Excellent presentation and super workpiece
Nice
holy crud that's sweet! i want one! but first i have to diy a lathe.
Just pay another hobby machinist in your area to make the parts a lathe is needed for.
@@gaiustacitus4242 ended up acquiring a surface grinder. Now I want a rolling mill. Lol!
@@mannsdan I need to build a 6,000 sq. ft. workshop to house all of the machinery and tools I'm accumulating and have plans to purchase. I own several acres of land, but the property is 30 minutes from my current home.
My wife is growing increasingly annoyed and wants me to build a new home on the remote property, but I need high speed internet and that won't be available there until 2026 (at the earliest).
@gaiustacitus4242 oh my goodness what a conundrum! I've been looking for property for years. The price of land has gone through the roof in my area lately and it's hard to justify spending a fortune on land and leave little left to build a house with! Best of luck brother!
@gaiustacitus4242 your username is interesting. Are you a historian? I know Tacitus was the most well-known Roman historian. I was just wondering...
😎👍
Dobra robota
Do you have all the measurements etc?, I would like to build this.
Really....come on man
👍👍👍
You can use just flap wheel 120 no without making all this😁
Hola amigo me podría decir de qué potencia es el motor
Привет👋
А магниты как закрепили? Они же могут и к заготовке прилипнуть и каждый раз их снимать с детали и вставлять обратно в отверстия?🤔
Epoxy?
Лайк ,но видос уже видел!
Вы продаёте гриндеры, если да то цена