COM14. EtherNet/IP - Beckhoff TwinCAT 3 (TF6280 Adapter) and Allen-Bradley CompactLogix PLC (Master)
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- #TF6280 #EL6652 #EtherNetIP #Beckhoff #AllenBradley
CORRECTION: TF6280 can be used on all PC controllers and Embedded PC controllers with an Intel chipset. Performance Class should be equal or above P40. CX9020 I mentioned in the video has to use EL6652-0010. The EL6652-0010 configuration procedure is very similar to TF6280. Thanks for Douglas correcting this information!
Beckhoff Playlist: • Beckhoff TwinCAT Controls
Allen Bradley Playlist: • Allen Bradley Controls
Data and Communication Playlist: • Industrial Automation ...
Beckhoff EtherNet/IP Slave:
(Software Solution)TF6280 TC3 EtherNet/IP Slave
(Hardware Solution)EL6652-0010 EtherNet/IP slave terminal
Next: COM15. Profinet Between Beckhoff TwinCAT 3 (TF6270) and Siemens PLC (TIA Portal) • COM15. Profinet Betwee...
Reference:
www.beckhoff.c...
www.beckhoff.c...
Very informative video. The TF6280 documentation on infosys didn't really explain clearly, but after watching your video the process of implementing EthernetIP is much more clear. Thank you for your efforts. Please do make more TC3 videos. You got a new subscriber 😊
Welcome my friend! Will do more on TwinCAT3. Please also leave any topics you like. Thanks again!
This channel deserves more ,I can't stop thanking you
Thanks very much! I am so glad you like them! Enjoy!
Protocols are very good subjects please do more and advanced lectures like this
Thanks Bud! Profinet will come soon
@@electricalautomation TY
Hi! One correction. CX9020 don't work with TF6280 because the performance level. TF6280 and TF6281 require the last performance level (P40). Your notebook is P90 and CX5120 or C6015/C6017 are performance level 40 (P40). Anyway a great video. Congrats!!
THANKS THANKS THANKS A LOT! Thanks for your correction! I checked, yes, TF6280 can be used on all PC controllers and Embedded PC controllers with an Intel chipset. CX9020 =must use EL6652 for EtherNetIP Slave. The configuration procedure is very similar with TF6280. Thanks again!
Hi, I really like your videos regarding Beckhoff. This was also a very nice tutorial. So much easier than just going through the help section.
Thanks for your effort and keep it up.
Glad it was helpful! Thanks for your watching! Will keep going!
Excellent video
Thanks for the visit! Welcome!
Hi, do you know if CompactLogix can be configured as Slave (Adapter)? Thanks
The Beckhoff can run as EthernetIP Master. If compactlogix is configured as a slave EDS file, then they can communicate.
@@electricalautomation Ok, but how do you configure CompactLogix as slave?
Great tutorial and thanks for reiterating the selections that could easily get wrong.
What is the highest update rate we could achieve over the EIP connection? Is it possible to get 1 ms rate for 160+160 bytes of data?
Also, looking forward to the TwinCAT HMI tutorial.
1ms is really a challenge requirement for the EtherNet/IP. For your case, I would recommend you use EL6652-0010 hardware solution EtherNet/IP slave terminal. Also keep in mind that you cycle time of the task should be faster than 1ms to exchanged the data between the TC PLC and communication image buffer. This means your PLC CPU will be very busy on the communication and PLC data exchange
Thanks a lot for your video! I have one question though. Right now I need to communicat my Beckhoff PLC with a testing device using TCP/IP protocol. Is it possible to use this Ethernet/IP protocol in my case? Or I just mixed these two different things up?
Ethernet/IP and TCP/IP are two different things. You can check the info of TF6310 for Beckhoff TCP/IP comminication
In case on windows , I suggest you install TwinCAT & included ads.dll(license free) will be more easier to Implement , in some dedicate controller , you can reference the protocol spec on Beckhoff infosys , try google "specification for the ADS/AMS protocol via TCP/IP" the connection type is TCP , use port 48898.
Thanks
Welcome!
hi, is it possible to connect twincat to micro800 plc?
Probably using Modbus-TCP. The Ethernet/IP in this video is the implicit IO connection Ethernet/IP. The low end Allen Bradley PLC only support explicit messaging ethernet/ip.
@@electricalautomation can you make a video tutorial on connecting modbus tcp/ip to another device. such as with plc micro850...?
@@SonNguyen-yr1tt Hello, I don't have Micro800.