1995 Ford Bronco rear window stopped working and the switch on the tailgate hasn't worked in years. Motor parts on order from LMCtruck and I was able to find the problem with the switch!
There are three nylon ball bearings that go into the gear drive between metal triangle gear and the large nylon gear that turns by the worm gear. The three little nylon balls ware out and disintegrate. Replace them and the ball berings will engage and the window will work. Some people use steel ball bearings, but that can cause damage to the nylon gears.
Trying to find A video to show location of the Circuit breaker, finally got my New Tailgate on, ready to put window, but not till make sure switches work, Don't have Old owners manual to show Fuse Identification.. But Think you gave enough to get my in the right direction, check wire leading to it.
just fyi if the window still rolls down and up a little too slow there is an adjustment for the tension on the worm gear. loosen the tension and it will go a lot faster! same on the front windows. that worm gear starts getting stuck after decades of life.
jeremy gruber were is located that worm gear because I have that problem I have to pull that window whit my hand and order to role up whit that key on of course
With your window not working, how did you get the tailgate down and the regulator to the window out? I have an 88 Bronco and my window wont go down (not getting power to the motor, but I know that it is a different issue) but I want to take out the regulator and clean it off and reattach the motor while its out, but I can't get the regulator out.
There are six wires at the switch. Two are BLK/WHT "Black with White stripe" . BLK/WHT are the "HOT" wires. One for "Up" and the other "Down". Check for power on both wires.
i have a 96. the rear window just started having issues. it goes up and down but is "jerky" and "slipping". there is movement on the glass and i can hear the motor turning even when there is no movement. It is not consistent. Any suggestions anyone????
Thanks for the tailgate videos, I know they are from 2017 but found them today. Thanks for posting.
3 11mm ball bearing to put in worm gear housing to replace the crushed plastic ball will fix that regulator .
That switch is a hard part to find. I finally got 1 hopefully my window will go up n down with the key. Thanks for sharing.
Thank you for this video. Fixing up an 84.
Thank you for sharing this! Great detaiI. I really appreciate the info you shared!
There are three nylon ball bearings that go into the gear drive between metal triangle gear and the large nylon gear that turns by the worm gear. The three little nylon balls ware out and disintegrate. Replace them and the ball berings will engage and the window will work. Some people use steel ball bearings, but that can cause damage to the nylon gears.
Good job fixing that rear window.....Stay Safe
Trying to find A video to show location of the Circuit breaker, finally got my New Tailgate on, ready to put window, but not till make sure switches work, Don't have Old owners manual to show Fuse Identification.. But Think you gave enough to get my in the right direction, check wire leading to it.
Thanks for the video
Thanks for the comment. That was five years ago. My Bronco is long gone!
@@rudedogii getting mine ready to sell.
The rear tailgate windows on these Broncos are its Achilles heel. Ford should have stuck with lifting window hatch.
this solved my mystery-thanks
just fyi if the window still rolls down and up a little too slow there is an adjustment for the tension on the worm gear. loosen the tension and it will go a lot faster! same on the front windows. that worm gear starts getting stuck after decades of life.
jeremy gruber were is located that worm gear because I have that problem I have to pull that window whit my hand and order to role up whit that key on of course
Motivated me to work on my back window getting a bit jerky.
What size are the screws in the motor? Im rebuilding the whole thing from scratch. I would appreciate your help. Thanks!
I'd use a little graphite lube for the rear window gear maybe?
With your window not working, how did you get the tailgate down and the regulator to the window out? I have an 88 Bronco and my window wont go down (not getting power to the motor, but I know that it is a different issue) but I want to take out the regulator and clean it off and reattach the motor while its out, but I can't get the regulator out.
Unbolt the motor from the regulator
How could you tell me if you bring a button inside the booth to close or open the glass since my walk can not find it?
i did on my bronco 1992 6in lift on it 35 tires love it
I lost that keeper ring that goes to the switch paddle, any ideas on where I can get one, besides the auto salvage?
My rear window go up with the key switch but won't go down
So I guess it's a wire like you said right ? 👍🏻
There are six wires at the switch. Two are BLK/WHT "Black with White stripe" . BLK/WHT are the "HOT" wires. One for "Up" and the other "Down". Check for power on both wires.
rudedogii will do thanks 👍🏻
i sell kits for these,3 nylon rollers & gears.the rollers eventually get crushed,its like a cush drive.easy fix..
I had to fix that twice. The new gear broke! Did I use the wrong type grease?
hey bro what size lift u have on that bronco and what size tires are u running
Thats my old Bronco. 6in Procomp Stage 2 kit with aftermarket springs. Deaver coils and Skyjacker Softride leafs. 35x12.50x 15 Cooper ST Pros.
i have a 96. the rear window just started having issues. it goes up and down but is "jerky" and "slipping". there is movement on the glass and i can hear the motor turning even when there is no movement. It is not consistent. Any suggestions anyone????
Brian Cox cheek ur window motor. Some times that worn out inside that berings
I have 87 bronco and my window go down god but don’t go up fast any idea
Abel Porto window motor is weak
I'm doing mine right now....🤔😔😔😔 who ever was in here before made a disaster pure Mickey Mouse 😖😣😔😞☹️😒😏
Keep them wires away from moving parts and make sure them drain holes are clear.
buy a piece of metal rod round one cut 3 pieces don't use plastic and never have the problem again