How to Replace Your Front Wheel Bearing / Hub Assembly - Volkswagen Jetta / Golf / Passat / Tiguan
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Changing out the front wheel bearings on the 2010 Volkswagen Jetta. Take your time with the triple square bolts and all will be good in the world. And remember, safety first! (safety glasses and a mask when dealing with chemicals and rust)
Voyage RC products here:
www.etsy.com/s...
___________________________________________________________________________________
Get your Voyage RC merch here:
teespring.com/...
___________________________________________________________________________________
ECS Tuning | Where I shop!
click.linksyne...
Wheels/Tires at Tire Rack
www.kqzyfj.com...
Eastwood | Do The Job Right
www.kqzyfj.com...
Shop at Amain:
bit.ly/3ot7QVh
Shop at Horizon Hobby:
alnk.to/fHj65S0
Items used in this video available at Amazon US:
amzn.to/3Mc3NIj
Affiliate Links -
Axle Nut Socket amzn.to/3gsVM1O
Axle Bolt amzn.to/3yhgS9s
Triple Square Socket Set amzn.to/3kdelt6
Wheel Chalks amzn.to/3jgyduU
Torque Wrench amzn.to/3Bfxd0B
Breaker Bar amzn.to/3kjFee1
Anti-Sieze amzn.to/3Dcudnk
My Dewalt Impact Wrench amzn.to/3DhF1Rh
My new FAVORITE Gloves amzn.to/387SZqx
___________________________________________________________________________________
Bearing assemblies used in this video:
www.ecstuning....
alnk.to/90wm875
___________________________________________________________________________________
Support us on...
Patreon - patreon.com/VoyageRC
Facebook @voyagerc
Instagram @voyagerc13
Twitter @VoyageRC13
TikTok @therealvoyagerc
___________________________________________________________________________________
Other videos to watch:
How to Replace a Ball Joint - DIY Guide - Volkswagen Jetta / Golf / Passat - Audi
• How to Replace a Ball ...
How to Install a Belt Tensioner - Volkswagen 2.5 A/C Serpentine Belt Tensioner Replacement - Pulley
• How to Install a Belt ...
RC Drifting at Tandem RC - Mini Games - Drift Events and Challenges - Longest RC Tandem Drift Train?
• RC Drifting at Tandem ...
___________________________________________________________________________________
(Affiliate Links)
Protek RC's new goodies!
bit.ly/3V96Xzz
My charger setup!
Junsi iCharger 406DUO | bit.ly/3XdKHW9
Voyage RC Resistor Bank | shorturl.at/KMSX2
I keep my cars detailed with these products ↓
WASH WAX ALL Waterless Wash Wax amzn.to/3SeoCGT
WAX ALL Ceramic Spray Wax amzn.to/3Fys7R0
Turtle Wax Ceramic Polish and Wax amzn.to/3scNgNx
Mr. Pink Foaming Car Washing Soap - amzn.to/472PyxM
Nonsense All Surface Cleaner - amzn.to/3Q8vxyV
Natural Shine Dressing - amzn.to/46IVk81
Butter Wet Wax - amzn.to/499FbtD
Meguiars Hot Shine Reflect Foam - amzn.to/3QyaA1y
My camera setup:
Ankerwork M650 Wireless Mic amzn.to/46I2o4x
GoPro HERO9 Black amzn.to/407UMGh
GoPro Media Mod amzn.to/3QvRE3H
GoPro Light Mod amzn.to/49bOLfU
GoPro Max Lens Mod amzn.to/3QdsPrJ
GoPro Volta Grip amzn.to/45TV0lG
Canon M50 amzn.to/3QcJhZr
Canon EF-M 22mm f2 STM Lens amzn.to/45OAtP4
Canon EF 50mm f/1.8 STM Lens amzn.to/45MBTtm
Viltrox EF-EOS M Lens Adapter amzn.to/46H5iXi
DJI Ronin SC Gimbal amzn.to/46JI3Mp
Gimbal Extension Rod amzn.to/3Fysqv8
Boya BY-M1Microphone amzn.to/40bos5e
Boya BY-MM1Microphone amzn.to/45KV0Eu
DJI OM 5 Smartphone Gimbal amzn.to/408jVk1
___________________________________________________________________________________
If you have any questions or comments please email us at voyagercchannel@gmail.com
___________________________________________________________________________________
Voyage RC
/ voyagerc
Disclaimer:
Due to factors beyond the control of Voyage RC, I cannot guarantee against improper use or unauthorized modifications of this information. Voyage RC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Voyage RC recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Voyage RC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Voyage RC.
Dont forget to wear your safety goggles and a mask when dealing with chemicals and rust removal.
Did a ultra rusty 2008 rabbit 2.5 in just over an hour including smoke break on jack stands. Done a few mk5's like this, never had to undo the ball joints. With the suspension fully relaxed, just turned the steering wheel fully to access the 12mm tripple square hub mounting bolts.
Just makes it a little easier 👍🏻
Can you put anti sieze on the inside where you said it was metal to metal contact?
Could've just undone the caliper bracket with the caliper still attached
Yep unless he hadnt looked at the slide pins for a quick min and wanted to, other wise the flat rater would just take the bracket bolts off
Why did you remove the ABS sensor?
I dont know what i did wrong but you state at 11:10 torque the bearing mounting screws to 52lbs + 90 degree. my instructions from manufacture said the same thing. 2 months later i hear and awful grind. the entire srew backed out and was rubbing on the steel back of my cv joint. It was a nightmare. i was far upnorth here in ontario an sunday no garages. Only thing saved my ass is that my reason for being up there was to visit an uncle and i was 10 min out when i left his place to go home so i limped it back. going to undo it all and re torque them. the top two are hard to get to with cv drive in.
Thank you for the informative. Do you always have to replace the rotor? Or can you just replace the bearings? Quite a bit cheaper as I won't have the car too much longer.
Easier to replace the whole unit. Not necessary though.
@@VoyageRC Thank you. A friend said I would probably need a press to separate the bearing from the rotor, but it looks like a hammer can do the trick?
Thank you for your prompt reply.
@@avogoofy5130 your friend is right
Amazing vid. wish you gave tip on removing axle but other than that, perfect instructions
Yup, that bolts a pain. Break it loose with the car on the ground, just don’t remove it until the vehicle is in the air.
What size is the socket of the axel nut
Stock axle nut should be a 12 point 24mm
Ever tried removing the carrier with the prop shaft in place ? Slide hammer ?
I havnt tried it that way.
Sorry if I missed it, but what size sockets were used for each bolt removal? What size triple square? What were the torque specs?
Hub mount triple square is10mm. Torque to 70Nm + 90 degrees - do not reuse.
Driveshaft bolt is 24mm 12-point. Ball joint nuts are 16mm. Brake carrier is 21mm.
Great detailed video! How similar do you think this process is as compared to a 2013 VW Beetle Turbo? Can't find anything specific but what you're showing here looks very similar to what I'm seeing when I remove the wheel. Thanks.
I would imagine it’s very similar. Thank you 🙏🏻
Im assuming that was a torx screw holding the rotor on?
@@CoolFuzion yes
Great job
I'm assuming this is the same concept for all the VW? I have an 18 atlas and imma replac it. What size tools did you use
Good job 👍
Thank you 🙏🏻
The ABS sensors are very hard to remote and almost always you will crack it and just get a new one. They are only $20. But great video!!
Why is it necessary to remove the sensor? It does not appear to be in the way of anything.
@@crunch805its not necessary
Banging video, nice one
I replaced my hubs as well but the ABS, traction control and tire pressure lights came on. Scanner said it was the speed sensors so I replaced them but the warning lights came back. Let me know if you have the same issue, great video 👍
Thanks! I had no issues after putting the new sensor in. It might just need time to reset itself to the new sensor (driven a certain amount of miles) Hopefully it solves itself.
did u figure it out el jorgino
Jorgino I would reset the ABS fault codes if you have access to VCDS tool.
@jorgino1007 never answered with the solution. I damaged a sensor. ABS, headlight, airbag, and TPMS warning lights came up. They all went away when I replaced the sensor. I didn't need a scan tool.
Hi Mate. Im in the UK. What size are the triple square heads. Just to make sure I order the right ones
I have a set that has a 8, 10, 12, and 14. It covers just about everything I need. There is also a link in the description to a good set that will have you covered.
Great video man!
🙏🏻
So doing this very job on a 2011, everything was fairly easy until trying to get the hub assembly out of the carrier.... it's rust welded in place, the hub assembly fell apart from the beating... so I came here to see if there is a secret method.
Rust is a tricky business. Soak it in some wd40 to help free it up. You might have to get the torch out too. Or just get a new carrier assembly...
old post i know. but i just beat mine out even thou i blew out the bearing lol. once i got a gap i used a chissel to work my way around the bearing untill it poped out
Do bad front wheel bearings make a grinding sound when slowly down or turning ?
They can if they are real bad. You would also want to check your axles. Most of the time a bad wheel bearing will whine at speed.
@@VoyageRC it’s most likely the brakes it’s not real bad but annoying
@@VoyageRC well fuck if it’s the axles might as well sell the thing lol
@@Tinger_90 your right, probably brakes
Is the torque specs the same for the mk6 for sure? ( 2017 jetta 1.4l)
Should be…
Okay thank you!! Cause I can't seem to fond the specs anywhere lol
hello there one question : do you need a 4 wheel alignment after you done all of it . thanks I appreciate your help
An alignment is recommended after any suspension work.
@@VoyageRC okay and thats included the replacement of tiguan wheel bearing assembly hub ?
@@arniereyes4426 since you have to disassemble the suspension to change it, yes
@@VoyageRC thank you....., I thought you only do the alignment if you touch tie rod . thanks again
Would bad bearings throw a abs module/pump code? 2014 jetta tdi
this could happen if there is an issue with the wheel speed sensor, which is mounted in the hub assembly
Yea I tried changing the sensors. Code still present, unfortunately volkswagen modules all have to be reprogrammed or rebuilt but thanks for the quick comment back I appreciate it
Do I have to replace the entire hub or can one just put in a new front bearing? It seems you can buy it ether way, but videos only talk about thew entire assembly - the bearing hub assembly in Canada seems to be about $400 while the bearing is between $75 and $140 (itself a confusing price difference).
Thanks
I would personally rather pay the difference for the assembled hub.
@@VoyageRC Everyone has their personal preferences and possibilities of course. From your answer can I take it that it is possible without special tools to do what am asking?
Thanks
@@gerrys6265 honestly, I havnt looked into it. You would probably need a press to insert the new bearings.
@@VoyageRC OK, thanks. Sorry for my misunderstanding. Since you put up the video I assumed you were a knowledgable mechanic and would know that kind of thing. Cheers
@@gerrys6265 I work on my own vehicles. I don’t know if I should take offense to that or not 🤣 -Cheers
What's the name of the song playing
"Arms Dealer" by Anno Domini Beats
So how do you properly apply the torque specs??
Torque wrench
What kind of socket did you use for the axle bolt
A 24mm 12 point. There is a link to one in the video description.
Thank you! And then it’s not possible to just re use the bolts, because the hun and bearing assembly from my parts store doesn’t carry those
@@jesseosuna8647 always recommended to replace those bolts
Do I need to grease anything
@@jesseosuna8647 all the new parts should be greased and sealed. Always check your other components for torn or worn boots and seals. Replace as needed.
What size triple square bolts are they?
I have a socket set with 8, 10, 12, and 14mm that covers everything. 10 and 12 are the most common on the vehicle.
Same as a 2014 Jetta gli ?
What size are the triple square bolts on the hub
I want to say 12 off the top of my head. I’ll have to double check.
@@VoyageRC any recommendation when those bolts are somewhat stuck?
Late reply for others that have trouble here. Mine were difficult to remove. I hammered in the triple square to the full depth of the bolt. I turned the steering to get an unobstructed turn with a breaker bar. Steady pressure, keep the socket in line with the bolt!
Is this the same procedure on a 2013 vw cc
It appears to be the same part number for the bearing/hub assembly. I would imagine the process is very similar, if not the same.
You didnt show the puller and removing the axle. Did you not need a puller?
With the axle bolt removed it should slide right out, unless it’s seized from rust. I didn’t need a puller. My process is shown in the video.
What the size of the triple square socket at 1:10
There is a link in the description for the axle but socket.
What side is the hub bolt
Background music too loud. Had to go to different site
@@stanpoole ok 👍🏻
What year vw's does this apply to?
Music is very annoying.
not sure why ya played with abs sensor ya don't have to remove it to do this job
I believe just unplugged would been good.
9:16 ...you skipped the entire part that I really wanted to see!
Since everyone else just shows it practically falling out of the knuckle, I wanted to see if there's a trick to freeing it up (other than just relentlessly beating on it).
P.S. - My VW lives in the rust belt... which makes maintenance LOADS of fun!
Unfortunately there is not an “easy” way to do it. I wish there was a special tool or trick to make it easy. Rust sucks. WD-40 and patience
@@VoyageRC... Lol.... I only have one of those, and the can of WD-40 is nearly empty! 🤷
Hot air gun. As much heat as you dare. Use heat shield to protect rubber parts etc. Freeze spray paid onto hot parts. Keep fire extinguisher handy!
@@charlesdale1462 yup... But I don't have a hot air gun... Plus there's lots of plastic and rubber near the hub. 🤷
2 hours of hammering did the "trick".
Were you concerned with damaging any of the surrounding parts? I’ll be doing this next week and the knuckle is caked in rust. Hoping to avoid any…collateral damage
Little anti zeize goes a long way
You should turbo charge
Nah, these sound to good NA
Yeah, don't hammer on the bearing like that, you will dimple the raceway.
It was a soft blow rubber mallet.
52
Should do rotors and pads since you are there already….
“While I’m in there I might as well…” It is the perfect time to do it if needed.
That background muzak is annoying as hell.
MUSIC
@@VoyageRC Funny. Good reply.
I replaced mine yesterday but Idk if i got a bad part or did something wrong. The car drove fine and after a few block it gave up. Went back home and jacked up the car, plenty of play in the wheel. I took the tire, rotor and caliper off and the hub is shifting forward and back. It has too much play, was i supposed to hammer it in gently like you ? Or did i get a bad part?
The part can be damaged if your were using too much force. However it’s hard to say anything without actually seeing what’s going on. There is always a possibility for a defective part.
@@VoyageRC No i gave it maybe 3 bonks with a rubber hammer, but not alot of force. I did drive with it already and I'm back to square 1.
@@ericerection Hi did u figure the issues?
@@muratsol2679 Yeah they sold me a bad wheel bearing
@@ericerection thanks for replying.. the reason i was asking I changed my front bearing both side front , left side ok but after change right. side , after driving brake wasn’t holding and making vibration on brake pedal. Trying to figure out what might be issues 🤔
What size is the socket
For?
Hub