Before i take these off the bench, i wanted to drop the impedance down and run them again. 1.33 ohms = .665 (or .67) each when strapped. Will they smoke? how much power will they put out? well watch the video and see for yourself! WOW!
Can you do one at .67 🤔 I just want to know if the amps will make more power or less power how the heat sinks will act and will the protection circuit will act
Sooo 2 ct 2000.1 strapped is 2ohm can I run my evls 12s d4 to these at 1 ohm seeing I'm battling impedance rises? My daily nothing crazy but I do compete in lower classes so I burp once on awhile as well...
While I’ll always love the old school stuff I was messing with in my younger days (PPI, Phoenix Gold, Orion), I can’t get over how much GOOD stuff is out there now. Granted, there’s still a lot more shit out on the market versus the days gone by. But there are a lot more good options than there was back then too. I never would have even known who B2 Audio was had it not been for this channel.
Mine worked great until I sold them, the two new owners killed them both. I’ve heard they had psu issues with the first runs. They were power houses and played full tilt all day when powered correctly.
#lowohmlife I just got a B2 Rage 2500.1 v2 in a trade last night, wired that into the dirt at .25 ohm, didn't have one issue. Was running 2 deaf bonce 2510s in a fully kerfed box. Clamped 3471 watts. Also demoed all day on that ohm load. 😂
Awesome vid Steve, as always! I’m gonna be back by the shop soon. Got a new build going with a 4 15 6th order. Need an MDF ring that can mount in a 10in speaker hole, but fits an 8in mid. Plus I’ll need some distro blocks.
Any good overbuilt korean board can handle half ohm all day long without issue l9mg as youve got proper charging system and batteries tonfeed it and don't play it up to hard clipping lol
@@meade916 it jumped on the certified test. It was not a smooth transition. Big d wiz explains this on failing cert tests. Now that means nothing in reality because we push to clipping regardless. Not to mention they where running sub ohm which is still cool.
@@detonationpyrotechnics4156 the "smooth transition" doesn't mean anything. It doesn't change the numbers at all. The numbers are still what they are. The certified test didn't "fail" LOL You guys say the most random things SMH
Awesome video, i been looking hard at those B2 audio riot 2500.1 v2 amps. I have narrowed it down to the b2 riot 2500.1 the DD M2000 or Salt 3. You think the B2 riot jus as good or better perfomer between the DD M2000 and Salt 3? Thanks alot the smd distro blocks and fuse holders are some of the best lookimg by far.
I want one of these amps? Do you know where to get them? I haven’t been able to find them. The places that I do find them they no longer have them in stock.
Before i take these off the bench, i wanted to drop the impedance down and run them again. 1.33 ohms = .665 (or .67) each when strapped. Will they smoke? how much power will they put out? well watch the video and see for yourself! WOW!
💐
Can you do one at .67 🤔 I just want to know if the amps will make more power or less power how the heat sinks will act and will the protection circuit will act
Sooo 2 ct 2000.1 strapped is 2ohm can I run my evls 12s d4 to these at 1 ohm seeing I'm battling impedance rises? My daily nothing crazy but I do compete in lower classes so I burp once on awhile as well...
Drop it like it’s hot!! Yo B2 holding up FTW!
Dammit Mr. meade high quality nothing better than doing numbers like that. At your specs and torture testing
While I’ll always love the old school stuff I was messing with in my younger days (PPI, Phoenix Gold, Orion), I can’t get over how much GOOD stuff is out there now. Granted, there’s still a lot more shit out on the market versus the days gone by. But there are a lot more good options than there was back then too. I never would have even known who B2 Audio was had it not been for this channel.
I was just telling my son this. They can get cleaner power now in a way smaller package than what we used to have to deal with lol
This brings a whole new meaning to rolling around in your whip STRAPPED
Them numbers are insane. B2 audio ftw. ✌
Infrared camera with temperature , to see how quick they get hot 😂 surprised the fuses didn’t pop , drawing that much power, dang 👍
they didn't get hot at all.
Nice. Love B2 amplifiers. Wish they bring back the zeroes. Well they have them on B2's page, but can't ever find them at Skyhigh.
Mine worked great until I sold them, the two new owners killed them both. I’ve heard they had psu issues with the first runs. They were power houses and played full tilt all day when powered correctly.
B2 Audio.... Worth EVERY penny!
#lowohmlife I just got a B2 Rage 2500.1 v2 in a trade last night, wired that into the dirt at .25 ohm, didn't have one issue. Was running 2 deaf bonce 2510s in a fully kerfed box. Clamped 3471 watts. Also demoed all day on that ohm load. 😂
I dig the acrylic on the amps. 8k is def good power.
As always, a first class operation.
I ran a Kicker KX1200.1 @ 0.67 on 3 12’s for years and that amp handled great.
B2 Audio doesn't play around man, damn!
Awesome as always!
1:23 "If they Smoke, they Smoke"
-Steve "Ivan Drago" Meade
Awesome vid Steve, as always!
I’m gonna be back by the shop soon. Got a new build going with a 4 15 6th order. Need an MDF ring that can mount in a 10in speaker hole, but fits an 8in mid. Plus I’ll need some distro blocks.
I’m late to the party, but I’m here.
Nice, a new Orion HCCA amps bridged mono can handle that as well.
Any good overbuilt korean board can handle half ohm all day long without issue l9mg as youve got proper charging system and batteries tonfeed it and don't play it up to hard clipping lol
I'm curious what kind of current that pulled?
These amps are incredibly engineered.
"If it smokes, we just edit it out. B2 is our sponsor after all."
I have two deafbonce AAK4000.1's strapped together at 1 ohm (half ohm each) and they been whamming for months lol
why did you strap them? post up a video of your system lets see.
@@meade916 for some reason it keeps deleting my Comment 🤦🏾♂️
Enough of the suspense throw them in there and let’s hear them b$&@$@s bump!!!! 💪🏽
Other than that certified test those amps did well.
they did well on all the tests.
@@meade916 it jumped on the certified test. It was not a smooth transition. Big d wiz explains this on failing cert tests. Now that means nothing in reality because we push to clipping regardless. Not to mention they where running sub ohm which is still cool.
@@detonationpyrotechnics4156 the "smooth transition" doesn't mean anything. It doesn't change the numbers at all. The numbers are still what they are. The certified test didn't "fail" LOL You guys say the most random things SMH
Beast of amps need them myself
I am interested in learning more about strapping. who knows where I can find technical information?
That’s insane. !!!! 👍👍👍👍
Awesome video, i been looking hard at those B2 audio riot 2500.1 v2 amps. I have narrowed it down to the b2 riot 2500.1 the DD M2000 or Salt 3. You think the B2 riot jus as good or better perfomer between the DD M2000 and Salt 3? Thanks alot the smd distro blocks and fuse holders are some of the best lookimg by far.
Yee that's some serious power
Top 10
fight Forest this James Wade a liar I love your music man we know wrap some more keep on wrapping man we know nothing I will come out
Powerful amps
How do these amps compare to the DD M2000?
Amp test Tuesday
So dope 💯❤️
Nice
Gah-dayum!!! Beasts!
So then one amp makes about 3.5 to 4 k watts ?
I want one of these amps? Do you know where to get them? I haven’t been able to find them. The places that I do find them they no longer have them in stock.
I’ll sell you mine!
SHCA has them 40% off right now. There's only 7 left
Yesss
yo what is the outro track on this video? shazam giving me no result
💪💪💪💪
🔥💯✌️
What does one amp run at 1 ohm?
3k
Olá amigo tenho enternece em um bom amplificadores
intro song?
Are these the v2 or v1 ?
v2
let’s go, here early for once!
G.O.AT.
3rd
1st
nope. 2nd. lol :D