TIPS For Using Hybrid Solutions Ceramic Polish & Wax / Paint Enhancement
ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2024
- 📺Subscribe So You Don't Miss Stuff!
goo.gl/DzwJ9W
🔗Check out the links below!
Hybrid Solutions Polish and Wax. amzn.to/2PKQX6Z
Xtreme Solutions Products. bit.ly/39nJNgx
Rupes Pen Light. bit.ly/2wrd7nM
Astro LED Light 400 Lumens. amzn.to/39lZkNL
Astro LED Light 500 Lumens. amzn.to/2uR9neR
Technicians Choice Ceramic Detail Spray. bit.ly/2vAQjBs
Workstuff Brushes. bit.ly/WorkStuf...
Orange LC Polishing Pads. bit.ly/2IdS0rI
Generator Slide Out Build. • Custom Generator Slide...
🚘Car Supplies Warehouse New Rewards Program!
The more you buy you earn credit!
Check out the link below and order some stuff!
carguysupplies...?sca_ref=81745.BhlFvTbXDc
_
👕Visit our online store to purchase STUFF!
teespring.com/...
🛒Miranda Detailing Amazon Shop
www.amazon.com...
⚫️Detailer's Cord Snaps!
bit.ly/3k0kk23
💻Visit our website for a HUGE list of tools and products we use! mirandadetaili...
Subscribe to our channel goo.gl/DzwJ9W
💎Click here for our mobile services: www.mirandadet...
Miranda Detailing
804-972-3051
www.mirandadetailing.com
___
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
🐕Dog Hair Removal Tools
Hoover Dog Hair Nozzle amzn.to/2BknvKO
Pet Hair Remover Stone amzn.to/2KYbNvu
Hoover Dust Brush amzn.to/2qMd3f9
🔦Lights
4 Pack LED Shop Lights 3600 Lumens 5000k amzn.to/2KiV9oT
5500K Photo Studio Light amzn.to/2DcQI0c
LED Light Bulb, 5000K Daylight, 1100LM amzn.to/2KdfVat
Astro 50SL Color Match Light amzn.to/2nqeyuN
Astro 50SLMAX 450 lm amzn.to/2Su3GuU
🧽🧪Tools and Chemicals
Myteelite II 8070 amzn.to/2kG54ug
McCulloch MC1385 amzn.to/2ABFGwm
RIDGID Vac 6-Piece Accessory Kit amzn.to/2GbBbKw
Vacuum Hose Coupler 11/2 Hose r.ebay.com/sXKxIl
Foam Cannon amzn.to/2IRLtlK
Vehicle Heated Dryer amzn.to/2BlAQ9t
Ridgid Vacuum amzn.to/2i8Psyy
Casabella Brush amzn.to/2ErkKcK
Capri Air Blow Gun amzn.to/2i8pxqB
Loew Cornell Paint Pen amzn.to/2FKsPuJ
Red Round Foam Applicators amzn.to/2FRFNqG
Detailer's Helper Belt detailershelper...?aff=9
Detail Factory Ultra-Soft Brush amzn.to/2DahS7Q
Microfiber Towels amzn.to/2AESEK3
AutoMagic Hydro Shine amzn.to/2BpPDA4
3D Orange Degreaser amzn.to/2h8reHs
303 Aerospace Protectant amzn.to/2Ad8r2l
Chemical Guys Citrus Wash & Gloss amzn.to/2ypszRx
Corrosion Technologies RejeX (Sealant) amzn.to/2zzwQBo
HDSpeed amzn.to/2xT3lGY
HDPoxy amzn.to/2T9mmCK
Chemical Guys V.R.P. amzn.to/2nL4AEo
Super Clean amzn.to/2zbIS1H
Stoners Trim Shine Protectant amzn.to/2hpDgfH or
Bucket Heater amzn.to/2DCpEUl
📷Recording Gear:
Canon SL2. amzn.to/2SniLhE
Comica CVM-V30 PRO Camera Microphone
amzn.to/2Ss4Tmu
#satisfyingdetailingvideos #autodetailingtips #mobiledetailing #interiordetailing #exteriordetailing #dirtiestdetailever #worstdetailever
Holy hand grenade batman! That tip to spray the distilled water on the TW Ceramic to take out the greasey film/smudge is the B.O.M.B!!! Definitely earned you a thumbs up and a new subscriber. 😎 It never ceases to amaze me how the pros like yourself give the viewership trade secrets so easily. I've been in the automotive industry for almost three decades and never not once have I ever seen that little water spritz trick used to even out a polish.. I just used it on my black Jetta and you saved me almost 1.5 hours of rubbing and buffing with a bag full of microfiber towels chasing that bloody ceramic polish greasey film/smudge look all over...
Awesome!! We love to hear that!! Thanks! 😎👍🏼
Thank you for recommending this product to me. I have found by using the Turtle Wax Hybrid line of products excellent. After properly preparing my vehicles for polishing, I applied 2 coats of the polish/wax, waiting 24 hours between coatings. Then I applied 2 coats of the ceramic coating, again waiting 24 hours between coats. It has now been 7 months since applying, and both of my cars look great! I use ONR for maintenance washes, occasionally use their 3 in 1 detailer. After 6 months, I used their hybrid wash, then dried with their wet wax. Phil, keep up the Great Work, thanks...
You’re welcome!! That’s awesome!
Hi Phil, it was good to see a 'normal' car getting the treatment instead of one that was almost mint to start with.
Some of those sanding scuffs made me cringe but it was nice to watch, thankyou.
Stay safe both of you.
Paint job was awful... hope to see more jobs with polish and wax in the sun if possible. You guys did amazing job, keep warm and cozy out there
Amazing turnaround on that old 9C1. The level of correction was excellent considering the type of paint used. Thanks for the tip regarding misting the panel after the TWU correction.
Cool video, Phil...though I'm 4 years late to the party!😮💨 LOVED the outcome! I REALLY like that shade of blue on the car, too!! I'm nervous and excited to see what I can do with my car when I'm ready to polish it!! Thanks for posting!!
Thanks! You will be fine! Follow all the tips you have learned and watched and you can totally do it!
Looking for a video about the TW polish and wax and this video was recommended by TH-cam. Your video is very well presented/edited! Subscribed!
Thanks! Welcome aboard!!
Great job Phil. Enhancements are challenging to professional detailers. TY for explaining that and the 💦 tip with Hybrid Solutions products is essential!! 🙏🏻
Love that cart!!
I am loving xtreme solutions products! LVR 403 on my black car made it pop. Yes it fills some, but so does Carpro essence which I also love on my daily, especially since it's a black car in the north east.
I did a one step on both our cars with the ceramic polish. Used the Rupes Yellow wool pads and got great results.
I dig those medium wool pads. Alot like the 50/50 but they run a bit cooler, very forgiving on arm speed.
Love that wool is making a big resurgence in the DA era. Once people realize there are a ton of misconceptions about it, and give it a try, they become fans of it quickly. Check out the purple LC Hybrid Wool pad with 1&Done if you want a bit more cut and pure correction before a coating.
Oh yeah! We do live those purple foamer wool pads. I’ll have to try it with one and done when we need more cut. Thanks!
Car looks outstanding Phil ! Thanks for sharing my friend 👍
Very nice , I was just fooling around with the Microfiber cutting cream and Polish the other day. I used a three inch on a door panel and it was great. I also like 503 with foam pads . I chase it with LVR 367 Ice which is another awesome Polish they have.
Sunday morning catching up on your videos with Lola my cat and coffee. I enjoyed this video, I liked you used a variety of products, clearly explain the how and why of your liquid and pad choices, as well as your LSP choice. Again fantastic turn around on difficult paint.
Sounds relaxing....Thank you! If you love coffee just wait until we drop this weeks weekend wash! Its super dorky but i'm sure some people will love it!
You have got to be one of the best detailers out there. How's it feel to be one of the best?
Wow! ....I’m SO NOT THE BEST BY ANY MEANS...but thank you sir!
@@MirandaDetailing I did my first scratch bn swril correction using the compound and the that same polish by ✋
Some people don’t realize how much a good detail can make a bad paint job look. Great work ! BTW, are you trying to kill me 😂. Next I would make sure her breakfast is cooked the way she asked. Lol
Right?! 🤣 funny you say...if I don’t make her home fries on our days off she’s... not a happy camper! 😩😂
Hi Phil. Nice job as usual. I was at my local Walmart this weekend and they had the entire line up of Hybrid Solutions on the shelves. Pretty impressive.
Thanks! That’s awesome!! It was taking a while for them to get them on shelves in stores.
Excellent vid and turnaround on this vehicle. 🍻🐱
Great video. Didn't know I would watch the whole thing. What did you use on the tires?
Thanks. Actually I don’t really remember what we used for the tires on this one but our go to for mobile jobs is Mega Hyper Dressing.
I have turtle wax ceramic polish but man I just keep on grabbing HD speed haha. Great video!! Once again. My monday is always better with one of your videos!
Yeah I know! 3D Speed is still my favorite! But this stuff should have way better durability.
@@MirandaDetailing oh yeah forsure! I just top it off with the ceramic spray from turtle wax and voila haha
@@MirandaDetailing th-cam.com/video/UNrKZefIOKs/w-d-xo.html heres a video I did recently with that combo! Enjoy
Huge improvement! great work.
It seems using a rinseless wash solution 1:256 works as well if not better than water to remove the TW polishing compound :)!
Hi. It can I guess. I’ve used both and didn’t see a difference. But definitely use what works for you.
Phil do you have any experience with a uro-fiber 50/50 pad and the Hybrid Solutions Ceramic Polish?
I have used the Polish with the orange foam pad on many applications and have been pleased. I understand the uro pad is a step up in both cut & polish - 1&done(?) I have pads on order and am in anticipation of using them with polishes and compounds. Thx.
Hi. Oh yeah! It cuts more and does finish polishing well on most paint. On softer dark paint you will definitely still see some micromarring from the microfiber pad. But that’s easily removed with a soft foam pad.
@@MirandaDetailing terrific man - thank you very much for that!
Awesome video brother!!👍🏼👍🏼
Nice, I like that you and the wife work together.
Thanks!
Not to take away from the video. Stoners trim shine is actually really great.
You guys do a fantastic job!
Great video. Would this polish be okay to use by hand with just an applicator?
Thanks. Yes, absolutely
Good job as always.did you use a paint prep and or a ipa after claying?
Nah! Maybe if I was in a shop setting, but I find it unnecessary for these jobs.
I want mister kitty face on a t- shirt, 'so you don't miss stuff' really cute!
teespring.com/mister-don-t-miss-stuff?pid=2
Hi from the uk , can you put this on by hand. And then wipe off ,, great video couldn't stop watching ,,
Hi. Certainly you can apply by hand. One gets better results with a polisher, but hand application works also.
@@MirandaDetailing many thanks keep up the good work take care,,,
I'm new to using a DA polisher and was wondering when using foam pads you have to blow them out or rinse them out.
Hi when your polishing the vehicle i do blow them out after a panel or two. then at the end of the day i wash them all out like this..th-cam.com/video/ak3jzmkUa20/w-d-xo.html
When finish polishing, is a alcohol based wipe down necessary or u just go straight into the sealant ?
When you’re using a combo like this made from the same company, no, you don’t to because they are using the same formulas. But if you were using a different brand polish and then a different sealant, yeah I panel helps.
@MirandaDetailing ok thanks for the reply. Great job as always, keep up the great work 🙏🏽.
I really like the new Turtle Wax Products. But not the Hybrid Ceramic Wax(non black version).
I completed my 2019 Honda Ridgeline.
I first thoroughly cleaned the truck.
I polished with 5" rotary, using blue foam pad, and using Turtle Wax Hybrid Ceramic Polish&Wax. This worked nicely for application, clean-off, and swirl removal.
I waited a few days and applied the Turtle Wax Hybrid Ceramic Wax. This I didn't like! Apply and wiping off left light&dark streaking, uneven.
I had to wipe down with a damp microfiber cloth and immediately with a dry microfiber.
I have used the TW ICE Wax and Detailing on my Corvette. Works easily, and has the shine.
I will not buy the TW Ceramic Wax or Detailer again!
HI
Thanks for sharing, Yeah the Hybrid Spray Coating will leave some high spots, but what you mentioned using a damp MF towel and a dry one to Buff is the recommended way to level it, It bonds immediately so its still there, but the high spots and streaks need a little water to level out. Its does that when I apply it also, but i learned that water trick and it's totally fine. Same goes with Seal and Shine, if it leaves high spots/streaks a damp towel will level them and make them go away. But use what works for you man! We all have products we like and the just work for us well, others have a learning curve.😎👍
At 5:06 ish, why would you guys spray stoners trim shine on that small piece of plastic ?! It creates so much extra work because then you have to wipe the oily overspray and have to worry about it going even farther when it’s windy
But still great video 👍👍
Thanks. Well that’s why we do it before we polish or wax. It’s not really not much more work actually. But I understand everyone has their own way.
Miranda Detailing ok cool!!
I’m with you Hank. Aerosol trim coatings get on areas not needed causing unwanted contact on painted surfaces and glass. Much of the product goes into the air and your lungs. If you decide to use an aerosol wear a mask like you would with a rattle can when you paint. Applicator type trim protection used after the paint correction and sealant would be the best procedure. Thanks for the review on the product.
Hey, thank for putting out all this info helping us out.
Which detailing/tool cart is that? Most don’t have draws that deep for the pads.
Thank you! I got the cart at Harbor Freight. It’s about $120
Would you reckon using the polish first then the ceramic spray? or the other way around?
Yes use the polish and wax first. Ideally you want to wait 24 hours to let that cure before you put the ceramic spray coating on. But you can apply the spray coating right after you polish it if you want.
Veni,vidi,vici! Good pointers.
It’s funny that I actually know what that means. 1 year of Latin. “I came, I saw, I conquered”. That was cool man!
Loving your work Phil some great tips there
Thanks man!!
I second that!!
Nice video. Since graphebe series is not available here yet, I thing to go with this hybrid polish. One thing I concern if the cutting ability of this enough to remove small love marks and swirls?
Hi, this polish is pad dependant which means when paired with a cutting pad or microfiber disc is has decent cutting power to remove light to moderate swirls and defects. When you need to polish with it you choose a polishing pad to refine.
@@MirandaDetailing Thank you. Since I’m not a pro and will be doing my two cars only, I don’t want to buy both Graphene polish and Hybrid ceramic. Which one you think is easier to use for moderate/good paint?
Hi. Both are easy to use. But since you can’t get the Hybrid Solutions Pro yet go with the original hybrid solutions polish and wax. Just remember to use a damp microfiber towel for the initial removal then a dry towel to buff.
Are you using the Technicians Choice straight or can it be diluted?
I’m using it straight. I love it! I heard it can be diluted but I don’t find it necessary. Plus it’s great as a drying aid while water is still on the surface, so it does dilute it like that also.
Great work!
You mention a few times that there are links “below” to sources for products you use, but the links don’t appear on my iPad Mini. This may an iPad compatibility problem, but is there another way to access those product links?
Oh no! You can visit our website at www.mirandadetailing.com on the products page. We have a bun chi of products there.
Does anyone have any tips when using a wax/polish on stainless steel? I'm trying to find a way to make this process work in a commercially used restroom that has stainless steel dividers. I dislike using WD40 every week on it to keep it looking clean. I'd like to try a polish/wax then a ceramic coating of some sort.
Hi. you can certainly ceramic coat the stainless steel, all you need to do is panel wipe it and coat it. But even when coated stainless steel always get finger marks on it if touched a lot.
Jess auto detailing with guest appearance by Phil 😁😁😁
Great video Phil 👌
Masking tape must also be used.
I did this on a black passat and the amount of residue was horrible. Looks like holograms everywhere. But when you wipe it the holograms go the other way. I had such a hard time finishing it. Pretty annoying. Its also black paint so theres that...
Sorry to hear that. Did you use a damp MF towel of a mist of water on the panel to wipe it and then use a dry towel after?
@@MirandaDetailing yes! Countless times. Its pretty weird. Plus it was clayed and iron deconned beforehand.
Strange... I mean it does leave residue but the directions say to just use a mist of water or damp towel and that works perfectly for me.
How much of the product did you use for a section?
@@MirandaDetailing possibly 4 pea sized drops per section
Ok. Yeah that’s about right. Very strange....all I can say is keep experimenting with it to see if the damp towel method works. It could also be the paint. Some paints react weird to polishes.
Tw or xtreme solution which is better ?
I don’t think one is better than the other. Each company has their great products and not so great products.
If I use aircompressor for the pads isn't there a risk of getting oil on them then?
My compressor is an oilless version. But even with oil compressors I have never seen that. Usually the oil goes in the tools not the tank itself. You may get water moisture but I also have water filters to catch water.
@@MirandaDetailing Okej that was good to here,I have a oil separator but haven't installed it yet.
One more question i have started to polish my rims with this turtle ceramic polish,do I have to use a paint prep or ipa before applying the spray ceramic wax or is just a water wipe of needed?
Thanks for the video !!
Hi Phil another great vlog, do you find the rupes pen light to be enough ? I’m accumulating my polish tools but find the lights are very expensive, well here in the UK anyway, maybe you could do a vlog on lights ? Or maybe you have , cheers 👍🏻
Hi Thanks. The Rupes light is ok. For small areas in a pinch it’s great. Can you get the Astro lights from your amazon? Like these amzn.to/334NjKB
Hi Phil didn’t see your reply sorry, it’s doesn’t look like our amazon has the Astro lights , looking at a unilite model the 1250 inspection light , mid range on price 👍🏻 thanks
I saw u in chicago auto pro clip... Good job.. Keep it up
Thanks man!! It was awesome! We plan on doing it again!
What does somthing like this service cost?
It all depends on the size of the vehicle and how far the customer wants to go on the paint. Check out our website for our services and prices. www.mirandadetailing.com
Wats the size of ur pads?
5.5 inch pads
I didn't see a link for the drying towl!
Buy towels HERE! 👇🏼
GT Twist Blue Towel. bit.ly/2E9zpLw
GT Royal Plush Towel. bit.ly/2EfhF17
Nice vid! Have you tried Xtreme Solutions sealant LVR 368? I am curious about it.
Thanks. I haven’t yet. I’ll reach out to them and get some. 😎👍🏼
@@MirandaDetailing Awesome!
Fun video, thanks Phil. Did she really bump you with the car or did you fake it? Hilarious either way. 😁
What kind of cord are you running on your Bigfoot? Did the OE cord wear out, or did you replace it from the start? Also, what extension cords do you use with polishers? I've heard a low quality extension cord can damage and wear out your polisher but never noticed a problem myself. I use middle of the road price wise because I'm OCD and toss them after a couple years. Plus the premium style extensions are thicker and heavier to pull around everywhere. 👍👌✌
Thanks!! Yeah she actually did! 😆. I relaxed the cord a while ago, it was cutting off while running it and Kevin Brown from Buff Daddy actually told me to replace it with a heavier gauge cord, the OEM ones tend to burn out quick he said. So I got an extra long 12 gauge extension cord and it was easy to replace it. It’s best to use 12 gauge cords for extension cords also. But now we use the SPTA cordless polisher. It’s amazing!
Where did you get the tool cart from
Right here!
Best Detailing Cart Ever? #Detailingcart #Mobiledetailing #Carguysupplies th-cam.com/video/4qXzu9IRik0/w-d-xo.html
I didn’t see a link to the rolling cart?
Try this www.bit.ly/2RQlss3
Don't hit me in the face Dad! YEAH WIFEY! HIT THEM JAMBS!
🤣
The orange lc is it the hydro tech pad?
Hi. No it’s like the LC CCS pads.
Miranda Detailing doesn’t look like it looks completely flat the cvs has divets in them
Oh sorry on this job I used the regular flat LC pads. I thought you were referring to the Hybrid Solutions pad. But it’s not the Hydro Tech pads. Just the flat LC pads.
Hey Phill how you doing i have a random question i tried to polish my black suv with a harbor freight rotary polisher with hd speed with the recommended pad 3d told me that thing is that it left hollograms/ or buffing trails so what can i do to remove that ?
Hi. Switch out your rotary for a dual action polisher. The holograms are left behind from the rotary unfortunately. Use a medium cutting orange pad or something similar and use 3DSpeed again.
Thank you for your time going to give that a try
What would something like that cost?
It depends....but our paint enhancements starts at $400
Miranda Detailing that’s a fair price.
Not bad hopefully I’ll see the turtle wax polish sold at my local Walmart. Great review Phil!👍
Did they repaint the whole car?
Yup. Ex cop car
Nice one :)
Great video!!! LOL at least she will get the insurance money
😂 Hey You're supposed to be on my side! She tried to kill me! 😆
Great Video of a entry level vehicle trashed paint from a trashed paint job. Thought you lose that MF cut pad for sure with paint tint transfer. Which cuts better 3D speed or TWHSCPW? Paint enhancement or a 3 step? LOL
Thanks. Yeah the pad cleaned out pretty good. But some tints like that will stain the pads. But that’s ok it’s just color. It’s hard to tell yet weather 3D Speed or Polish and Wax cut better. I’ll have to do more testing on more types of paints.
Thanks!
👍
What's the reason behind washing the wheels after you wash car?
And that car was obviously in a front end accident. In one of your shots at the begining of the video, the hood lines did not match up. They stuck out like a sore thumb. This car had a half @$$ paint job and in my opinion needed a light wet sanding before your correction.
The reason you your pad was blue is not because it was a one stage paint job. It's because the clear was tinted to help blend the old finish to new finish. It's still a base coat clear coat finish.
It’s just our process. Everyone has their own way of doing things. Since we work together it’s fast this way for us.
Yeah probably it was in an accident. It was an ex cop car. Customer didn’t ask to have the headlights refinished. And it was single stage paint, not just tinted clear. But that’s ok...you aren’t here working on the vehicle to see what we see. Please refrain from just saying things that you think you see.
At 4:00 I thought I was watching twin peaks :)
Thats not a polish, if u want to correct use ultimate compound meguiars, after that use ultimate polish, THEN use ceramic wax by hand.
Why would you say that? It actually has micro polishing agents in it. It was designed to be used by hand and primarily with a DA polisher....not sure where you obtained your info...I've talked with the chemist myself...plus this is an enhancement not a correction, it removes 50% or so of the defects. I use this all the time in this way and it performs incredibly well.
Miranda Detailing yeap, I mean this wax is for correct minor scratches or swirls, is like turtle wax color magic, 20 years ago wax an incredible wax, but it says polish as well, and color magic is more like a wax than a polish, is just for minor swirls
No it’s completely different technology. I never said it’s for paint correction. This is for paint enhancement. Which is for minor swirl removal. It does polish and remove swirls, not just covers them up. I’ve been testing this fir months now. Not sure where you are getting your info. Please do more research or try the product yourself.
Miranda Detailing yeap im gonna try it, thank u
No difference for a car detailer you lack a lot
Sorry What do you mean?