Stock Block LS Goes 7s on The Brakes! (40+PSI Boost)
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Squirrel Tuned Shirts and More Here!!! squirreltuned....
Last time out with Brennans car for the season!
Check out my other social media!
Facebook: / squirreltuned
Instagram: / squirreltuned
Website: www.squirreltu...
People that help me out and that I am a Dealer for:
4D Motorsports: / 4d-motorsports
Brian Tooley Racing: / briantooleyracing
Wilkes Performance: / wilkes-performance-232...
Hughes Performance : / hughes.performance.racing
Forced Inductions: / forcedinductions
Turbo Diesels INC.: / turbo-diesels-inc-2428...
That’s awesome. Which rotating assembly from Texas speed? If you don’t care.
@travisshaffer1530 I am not 100% sure but I believe it was their I beam rods. Not the basic h beam
His cars flying. Definitely motivates me every video with his car and yours.
Yes sir need to get yours done you'll enjoy it a lot I think. Need to get mine done too lol. Just gotta take it one thing at a time
Wanna see more content of this man
I was out there as well, made 4 passes. I was behind yall in the lanes a couple times - that's a good looking car. Good job!
Thanks man I meant to look your channel up I seen you out there as well. I forgot though so I appreciate the reminder lol. Car looked good man.
@@SquirrelTuned thanks! First night out with a complete new setup, ran way better than I expected!
@@diygaragetx nice man it looked like it was moving for sure I just watched your video on it.
@@SquirrelTuned it was turned down pretty good. It has ran the exact number you posted on your 2nd or 3rd run, and has been a .60 in the quarter on a let off pass. Stop by and say hey next time!
@@diygaragetx will do man and nice, seeing what it ran on low boost i figured it would be around where we were turned up.
Awesome video
Nice car
can you tell me what the vapor from boot lid area
thank
Yea sir that is the puke tank. Essentially a big catch can. So it is just venting from the valve covers. It is put in the back of the car like that because if the engine were to get hurt or something and put lots of oil in the catch can, if any were to overflow it would not go under the tires causing a wreck.
@@SquirrelTuned dayum that's smart. Do you also plumb wastegate/exhaust to keep from oiling down your tires in case you make piston soup?
@@LT3Fluffy yeah try to keep that in mind too.
Stock internals? How much power it makes at 40psi
No sir some cheap TSP internals and based off mph about 1500hp.
Man I didn’t know you are in texas
@minitrucker04 I'm in eastern New Mexico actually but do most of my racing in Texas. This was about a 7hr trip one way.
@@SquirrelTuned nice. What cid? 5.3 ith tsp h- beams? Boost pistons
@@alexrozier6550 365ci 6.0 block. I'm not 100% on the rods it may be the I beams. And wiseco pistons. I'll see if brennnan knows for sure.
Would be so much better if that set up was in a actual gm car.
Which head gaskets even hold 40psi of boost on a stock block
This one just has ls9 gaskets. There's a lot more than just the gasket involved in getting it to hold up. Tune and converter are a couple of the most important parts that help with that too.
@@SquirrelTuned yup u got a point there I have ls9 on mine making about 30 psi haven’t had a issue but that’s cutting it close
@@SquirrelTuned hey bro what oil pump u run on your new edge I’m haveing issues with mine drying out the pan
@@turbovicsatx2910 melling 10296. Add more oil to it. I always overfill them.
@@SquirrelTuned I have the 10355hv which is like 20% more than the 10296 I’m dropping down to the 10296
What are you using for the fuel system this time around 🤔 i been having feul pressure problems nice 👌 build it turned out real nice
This car has a cable drive pump setup from Robert Ette. Mine has a belt drive setup from him. Both cars have 11.5gpm pumps. Need a ton of fuel for methanol, this one was using 3300lbhr of fuel on 41psi
@@SquirrelTuned i have a similar set up running two 535 walbros on e85 i read when you were having trouble with the three 450's i think I'm falling short thanks for the info
@@lowbudgetracing9129 it's possible for sure. Methanol will take about double what e85 does so need a lot of pump for it. Think i calculated 11.5gpm is equivalent to like 9 450s lol. I have a customer with 3 525s on e85 though could always add another one.
@@lowbudgetracing9129 you can also mix some race gas in and stretch the pumps much farther as well. That's what I did.
Great job! 7s on the brakes👍
Thank you!
Hey, ya think you can tune a Gen 3 Hemi?
@@hoost3056 I've tuned 1 before but I stick to aftermarket ecu stuff now.
Would like to see a heads up with James taals car
You and me both I bet they are fairly close in times.
@@SquirrelTuned going bigger on turboes? This car looks a little more effortless in my opinion, but I guess we don't know exactly what his runs
@@GreatLakesLogger yes sir going to a single 102 over winter. And I know he has been 1.11 60ft but don't know any other info on his.
Cement block?
Nope still water running through the block and heads. Just has decent heads and studs. Tfs235s and ca625 studs and ls9 gaskets.
@@SquirrelTuned who built the motor?
@@KobaBlack113 Texas speed built it a few years ago for someone else and Brennan picked it up
And this is sbe
No sir this car is a forged internal stock block combo.
Wich LS have you out in + the 2 turbos?
This car has a 6.0 with forged tsp internals and some tfs 235 heads. And the turbos are forced inductions 72/75 s300s. Which are actually going to be for sale.
@@SquirrelTuned is it destroked to run that amount of boost I think it's destroked if it is which engine did you destroke
@@hassanabas1549 no sir it is not destroked. It is a 6.0 and still has 3.622 stroke and just over factory bore.
@@SquirrelTuned wow impressive how were you able to run it with that much boost safely without breaking any pistons or rods
@@hassanabas1549 fairly loose converter keeping rpm high and proper tuning. And it does have forged internals. Cheap ones but still forged.
What does the car weigh at the time of these runs ?
Just under 2900lbs
@@SquirrelTuned race weight?
@@SouthernSpeedVideos Yes sir
@@SquirrelTunedhot dog! Looked like a bat outta hell and to hear you say sixty wasn't good like ehh I wanted a 1 0.. I'm over here like the 1 23's are moving! Hope I can get even anywhere near 30's with my SBE 80 deal in an s10. Love your vids longtime subber.
@@SouthernSpeedVideos Thanks man! Been subscribed to you for a while too! Funny how easy it is to get jaded in this stuff lol. Good luck with it!
LS is nothing to brag about👎🏽
Noted
Adorable. Factory sealed coyotes are doing it in the cars they came in.
Did yours?