SuperSlicer is free, open source and very powerful!
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2024
- I have been using Simplify3D as my slicer since 2014, but a recent drive failure meant I was stranded without my print profiles. Since the major S3D update promised in 2019 seems no closer, it was the perfect time to switch to a more modern, powerful slicer. In this video I explain why I chose SuperSlicer and why the correct slicer choice is very subjective.
Thumbnail logo taken from here, credit to n8bot: github.com/supermerill/SuperS...
If Simplify3D is your choice, do yourself a favour and regularly export and backup your printer profiles. It’s not fun to have to start again, in either S3D or a new slicer.
If the Simplify3D update ever hits, I’ll probably pay to try it and make a video, although it will take a lot for me to switch back now!
SuperSlicer GitHub: github.com/supermerill/SuperS...
0:00 Introduction
0:38 My history with Simplify3D
Simplify3D website: www.simplify3d.com/
Old Simplify3D video: • Simplify3D 다운로드 & 설치
Viewer Brian has created a script to back up S3D registry settings: pastebin.com/zdpt3eDg
1:43 Comparison of slicer developments
2:29 The best slicer is the one that works for you!
Is Simplify3D worth it? Video: • Is Simplify3D worth th...
4:48 Why Simplify3D no longer worked for me
6:30 Choosing my new slicer: SuperSlicer
7:41 Installation and tour of SuperSlicer workflow
10:27 Features missing from my previous slicer
12:42 Breaking up is hard to do: Transition frustrations
My GitHub repo of my SuperSlicer profiles: github.com/teachingtechYT/Sup...
14:00 Conclusion
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech
My response to a few frequent comments:
- A list of differences between SuperSlicer and PrusaSlicer can be seen on the readme of their GitHub (shown in the video): github.com/supermerill/SuperSlicer Beyond this, as I also showed, support for Klipper firmware and a much greater range of premade profiles for non Prusa 3D printers are two factors that were important to me. When I am more familiar with SuperSlicer I will consider a general tutorial on migrating to it and settings for ironing, etc.
- Some people somehow missed one of the key points of the video: The best slicer is the one that works for you. If you prefer Cura, PrusaSlicer, IdeaMaker, etc I'm perfectly happy to accept your choice. Some viewers, however, can't fathom that people might have different priorities and opinions to them and are upset by SuperSlicer as my choice.
- I'm astounded by the amount of people telling me to dig into the registry of the old drive to retrieve things. I looked into this at the time. Yes, you can get to the registry. No, it's not as simple as a quick copy and paste. Here is a forum thread on the topic: forum.simplify3d.com/viewtopic.php?t=13703
In my case, I have the added pressure of the drive deteriorating and becoming harder and harder to access. The chances of it dying part way through were real. So I could take the chance and endure a lot of stuffing around, or pick a new slicer and build up new profiles. Easy choice for me. The third option is that Simplify3D actually release their major update and fix this flaw.
How long had you been using the SSD as your primary drive? (How old was it when it started failing / etc.) ?? I am in a similar situation, though fortunately nothing has started failing yet. I am wondering over what kind of timeframe I should begin to worry. Thanks!!
@@bratwizard Always, always, ALWAYS worry about your production data. Backup, backup, backup, and if you think you're good, backup some more. The question comes down to how easy is it to reproduce whatever it is you have in production to a new system as live with relevant working data. Test recovery, and test backups. Hardware can fail at any time because of cosmic rays (No joke, bit rot and bit flip is a thing) so some bad CPU or HDD controller math could mess your system up.
If you try to recover data, make a disk image onto a different drive first, then work on that copy to recover data from it. I have done quite a bit of data recovery and archiving from *really* old computers (volunteer at a local computer museum), and that is the correct procedure to follow. For imaging a modern disk (PC compatible) I suggest using ddrescue from Linux if you are comfortable with command line. I don't know what options there are for Windows. However, the best option is to have regular backups in the future.
@@VorpalGun
I've used Linux as my primary OS for over 25 years. I couldn't live without ddrescue. Thank you for mentioning it. You saved me a lot longer post.
@TeachingTech (I wish it was as easy as using that format to direct a comment to a specific user, which for the channel owner is not possible, even when clicking "Reply" directly)
Michael,
I'm amazed how many people get their undies in a knot over other people's choices.
If you have time, please see my comment in the main thread, if you haven't already.
The final nail in S3D's coffin. I also paid for because I liked the UI and the results. But now, it's time for a change!
Thanks Michael. Good job as usual!
I now definitely feel inspired to switch when I eventually get a new printer. Thanks for this video.
Fanstastic! I hope we will get more content about your discovery with superslicer explaining some usefull settings :)
I'm please to see Michael feels the same way as I do about SuperSlicer. I've been using it for the past month. I moved to it from Cura and PrusaSlicer, mainly because I saw a review of SS which went through the (very useful) calibration menus it contains.
However, after playing with it for the past 4 weeks, I can see it's well ahead of Prusa and Cura in many other ways.
Firstly, it has a Klipper flavor choice, which makes it work well with my highly modified CR10s Pro V2. The combination of superslicer and klipper has taken my CR10 to a new level of speed and quality of printing, and for this reason alone I highly recommend it.
The other things I've noticed are very clever choices of default settings in SS, when you add a new printer. These are generally enough to get you going before you start tweaking, and there's also a very helpful support community which is at least as quick and effective as the Prusa community (and that's saying something).
So, it's superslicer and klipper for my machines, and is likely to remain so for the foreseeable future.
Bests
Chris, Tasmania.
Thanks Michael. Another great vid with good info. I always wanted to try another slicer, and this just solidified the fact that I should. This slicer seem to have very good features, so will definitely give it a try. Keep up the good work.
I downloaded this last night, right after I saw your video and I'm having a great time! I can see plenty of features I'm hoping to see videos on later. Like the built in calibration wizard, I'm in the process of setting up the filament extrusion now and it is a dream! I'm having a problem trying to figure out how to get it to slice my files from 3DLAB Prints properly, but I'm sure ill work it out. Thanks for all your help! You teach me something new almost everyday right now!
3dlabprint models will be supported once SuperSlicer will merge PrusaSlicer 2.4.0.
This is perfect timing! I’ve been taking a break from 3D printing for a while to focus on other projects and am about to jump back in.
After cleaning them up and performing some needed maintenance, I’m planning to switch over to Klipper as I was having way too many issues with Marlin 2.0 on my various printers (I have a CR-10 Mini, Sidewinder X1, and FLSUN Q5 all with various modifications running custom Marlin builds and it’s been a huge headache). I was looking into Klipper and found your recent videos and they were very helpful!
On top of that your other video about using old tablets and cell phones as printer displays reminded me that I have literally 5 cheap Android tablets laying around from a previous job that I had completely forgotten about and would make perfect Klipper (or Octoprint for Marlin even) control interfaces!
Then I see this video today and it was the last piece of the upgrade puzzle for me! I’ve been having continual headaches with every Cura upgrade (something always seems to break with my profiles and other functionality). I’d heard great things about Prusia Slicer but as you said it’s very tied to Prusia printers and doesn’t support Klipper so that was a no go for me.
This looks like a fantastic option! I’m already interested in Super Slicer just from the bit of UI you demonstrated and some of the cool features it has like the custom infill options.
Thanks again for your videos! I would consider myself a highly technical person, and I have no problem digging through documentation, source code, and forums to figure out what I need, but having someone lay out everything they’ve personally tested in such a clear way makes a great starting point and your videos have saved me a ton of time and given me a bunch of ideas I never would have considered or just hadn’t occurred to me (like reusing the tablets).
Thanks again and keep making great videos!
I am gonna try it. Thanks for all your work. Sorry for the loss of your drive. That is so very stressful.
Hey Michael, I‘m so grateful you let me know there is such a great slicer out there! Best wishes Julian
Astounding! Thank you! Teaching Tech is the most trusted voice in the 3D printing world and I was already downloading this before I heard your reasons (the mere mention of it from you was enough). Thank you for all that you do!
I'm getting back into 3D Printing after not really doing it much for the past few years. Just came across your channel and have been thoroughly enjoying it. Part of getting back into it is that I don't have much of anything set up anymore. Your SuperSlicer recommendation is definitely one I am going to be incorporating into my new setup as I find it insane that there have been basically no updates to Simplify3D since I stopped while others have been innovating left and right.
I found out about SuperSlicer while looking through the RatRig file section. Had a look at it today and liked what I saw. Sliced a couple prints for my Ender 3V2's to print at the office today and they are printing beautifully. Will definitely try this on my RatRig this weekend, and excited it has support for Klipper, as I am making the switch on Sunday! Great review Michael, thanks for always putting out quality videos!
I started using super slicer a couple weeks ago. It has turned into my favorite slicer. Looking forward to some more videos on it.
Glad to see this one getting traction.
I keep my SS profiles on a Dropbox share. Helps synchronizing between machines.
Another thing you can do is add solid objects to the build surface. They get printed the same as if they were an imported STL. I use a 0.2mm cylinder primitive for filling holes. This makes the 1st unsupported layer a standard bridge that is 1 layer thick. No supports are needed for the circular perimeters that would normally be there. I just open the hole w/ a reamer or bit after printing.
Makers Muse talked about this sacrificial layer technique several months ago but he designed them in during CAD if memory serves.
Just got my 1st 3D Printer. Glad I came across your video. I'll give SuperSlicer a try.
Thanks.
Never heard of...but as I'm looking for a new slicer I will give it a try!
Thank you!
Thank you! I'm using SuperSlicer now and getting great results. I picked up an Ender 5+ with direct drive recently and was getting terrible results from Cura. Your calibration gcodes were working fine, which made me think it was slicer related. I had just watched this video so I decided to give SuperSlicer a shot. The UI takes some getting used to when you've used Cura for years, but I am so glad I made the switch.
This video was made for me. I bought S3D 5 years ago as it was the best choice for me back then and I'm still using it out of habit, so to speak, despite knowing that it's quite outdated and that I should switch.
I have the same reaction to Cura, which is a shame since it's apparently a brilliant slicer, but SuperSlicer does seem like something I could get used to.
Thanks!
Well, you changed my mind just the calibration alone is making my printing so much better. Thank you so much *Teaching Tech* you rock!
Always good to have several options available.
I will for sure test it in the near future.
And, as always, thx a lot for this video. Clear, concise and understandable.
Good job and keep it up !!!
Nice to see someone finally bring attention to the SuperSlicer fork. So many good extra features.
I'm sold saw your vid and have been using it since then im only pretty new to the hobby and always used cura but i seem to be picking supsli up really easily thanks for the informative and helpful vids!!!
One nice feature is custom filament G-Code: if you have a different build plate temp for a filament, you can create a mesh level for each temperature to account for thermal expansion, then put that into the filament profile.
Have been avoiding this video as I was thinking I couldn't want anything from my slicer (prusa slicer), but after watching it I'm considering making the switch. I like the added capability from the Super Slicer. Great video and thank you for the content.
Michael I have been following your channel since I got my 3 Pro. I have been using Cura and it has been OK but I found it difficult at times. I have just downloaded this slicer and carried out a print that I have done before and the difference is is amazing. I have found it faster printing (do not know why), finish is good, and accuracy (hole sizes) excellent. Things may get better with more knowledge. Thanks for the video.
Thank you a lot for the overview of the slicer and for your videos on the MPMD. I started 3D printing many years ago with Repetier Host, am now using PrusaSlicer for my MK3S clone. I heard about SuperSlicer and will give it a try with my new heavily modified Monoprice Mini Delta, especially to try the caliobration menue to tune the new printer.
I love it...It prints better than all my other slicers with zero tweaking. Thank you brother!
I've had my CR10S Pro V2 for a while now and have gone back and forth between Cura and Prusa Slicer. I usually stick with Cura, even though I prefer Prusa's interface. I've seen (and thoroughly enjoyed) a number of your videos. So, I'm not sure how this one slipped past me until now. I'm definitely going to give SuperSlicer a go! Thanks for the great videos. You've definitely been a great resource for me while I learn 3d printing! Cheers!
Thank you so much for this video! I am hoping to find more updated information now that I know about SuperSlicer. I started with Ideamaker and then switched to Cura - mainly because there's so much help with profiles on TH-cam. But my prints on my CR6SE have been total garbage lately and I can only think it's the slicer. Crossing my fingers that this switch will fix that!
aaaaaaaand subscribed. great video. was having trouble with cura printing an open infill pattern to have vents to cool a raspberry pi. cura was 'weaving' the hexagonal infill with layers over other layers and doing some wonky stuff that was causing PLA to jam on small features as the layers built up. downloaded super slicer and got the best print of my life with only a few tweaks to some settings. the ability to print different parts with different settings is AWESOME!
Doubt I'll ever try superslicer but I'm glad to see about and glad that you're a loyal user that has kept to it all these years!
Hey i just watched your vid and i have been using cura for some time and i recently got to a point that i had changed settings then i would lose the location of the setting, i installed super slicer and wow i am so glad i gave it a try it has made me love 3d printing again, super slicer is as simple or complex as you would like it and as i learn more about it the more options i can unlock, and by far my fav feature is the ability to send strait to octoprint. love your work and thank you for educating me on a stunning be of software, would love to see more tips and tricks as time goes on.
Absolutely love Superslicer! The ability to tweak every detail allows for some insanely nice prints. Zseam can be made to practically disappear and prints are so much smoother.
Z seam is an area I really want to investigate.
I noticed great improvements in my z seams when moved on SuperSlicer even without any tweaking!
Whelp, I'm sold! Thanks Michael, I think I'll follow your lead and part with S3D finally.
Great job as usual! I’ll be headed over to superslicer to check it out tomorrow.
Cool, thanks for bringing this to my attention, I've used CURA mainly because it 's what I started with and PrusaSlicer's standard profiles weren't cutting it for me and I just never got around to working the right settings out, but this has given me the nudge I needed to try a SliC3r style sw again.
Probably my most used feature of Superslicer is the search button (magnifying glass icon). Makes finding a specific setting quick and easy.
Thanks for the excellent video! Love the channel!
I like it too :)
excellent video. I have been using S3D for a few years now but what you have shown looks like it is worth a go
Thanks for review. I am new to 3d printing and had just gotten comfortable with Cura 5 when I upgrade PC to Win 11 and Cura stopped working. 😢 I have made one print with Prusa and can see that I’ll have to learn new names for and optimize all the settings all over again. After watching this, I think I’ll do the “ starting all over “ with super slicer instead. Thanks again, you earned my subscription.
Thanks Michael! Always find your videos informative! I like you don't like Cura's UI. Going to give this slicer a try! Keep up the good work and your efforts are appreciated.
Thank you Michael for this... I've been swaying in thought over Prusa vs Cura, then I chance on this and I'm better informed of the three. It's good to know the history of Prusa originating (forked) from slic3r, and now SuperSlic3r is a fork of Prusa. Just purchased an Ender-3 from SainSmart for a steal, it seems to have / come with Prusa slicer, not received it yet but just delving headlong into the 3D space to be an authority before my printer arrives! Thanks again!
Downloaded & and will try soon. I'm glad you elucidated what it was you didn't like about Cura's user interface because it's EXACTLY what I don't like about it either. I'll need to make sure that Octoprint/Octopi integration is available because that has become completely embedded in my workflow (lights/power controlled by MQTT, reporting of issues and a picture texted to me when it's finished). I love my Ender 5 and am always looking for ways to tweak it. Thanks for making us aware of this.
Thank you for making this video! I recently switched to superslicer because I'm using fluiddpi for my ender3v2 and using klipper. I was a big Cura fan but due to the change from marlin to klipper I would recieve notifications in klipper that some of the gcode was ignored from cura and would mess up some of my prints. Please make more detailed videos on super slicer basics and features!
Most of these features have been available in Cura for a few years but you definitely showed me a few things I didn’t know about! I like that it’s open source too, I think I’ll give it a shot! Thanks!
There are really great things about SS.
1. If you right-click on layer marker on g-code preview you can add custom G-Code to that point
2. You can make your own custom dependencies between slicing / filament / printer profiles. For example, you can define custom variables and keywords in printer profile on "notes" tab and in the filament profile in "dependencies" tab you can use "if" statement to filter profiles according to your own logic
3. You can use simple scripting language in all "custom g-code" tabs, changing printing parameters on the fly based of different conditions
My first 3d printer is on it's way (ender 3 v2) so I naturally start to seek the slicer I'm going to use. From your presentation I decided that I would check this instead of prusa. Thanks for the info! Well done on the video.
Had mine a month. Love it. Good luck and have fun!
I recommend you check out both, prusa slicer does seem a bit more polished, but super slicer is more polished
I'm getting my first 3D printer tomorrow, and have been researching a lot in the last 2 weeks while I am waiting for delivery. I am going to try all of the opensource slicers you have mentioned to see which one fits me the best. I appreciate your videos a lot, as they cover more of the intricate basics that beginners need to understand.
don't waste your time.... use prusa and don't look back.
@@barenekid9695 prusaslicer is solid and easy to use, which is why i use it, but prusaslicer and cura both have some features that are mutually exclusive.
I switched to SuperSlicer more than a year ago. The ability to save files to 3mf makes the project execution so much easier.
@Plynon but with more!
@@lio1234234 NO. It's a beta fork of Prusa slicer. It even says that in the OFFICIAL docs
@@backtoearth1983 he never said it wasn't. Think you tagged the wrong person.
It's a beta fork that has far more control and is far better than prusa.
@Plynon but better with the changes made. It's a fork of prusa that far exceeds it.
Thanks for another great video and all of your efforts on the channel - has helped me sooo much as I have learned the 3d printing ropes. Am just building a Voron 2.4 to go with ,y CR10S Pro V2 and whilst CURA is very good I also don’t like the UI so will be giving this a try. Thanks again
Still love Cura 4.11. Good seeing Ironing now being added to other slicer programs, as that function alone is worth EVERYTHING. As it lets you get away with a higher layer height and thus a faster print, while retaining quality of the print. So using a .1 layer height, with ironing, will give you the effect of a .05 layer height print, at half the time needed to complete. This is a must for rounded or sloped areas of a print, that would otherwise suffer from the "stair stepping" effect of the layer height along the Z axis. Ironing smooths that transition to a much better level.
As for the Wifi adding to all printers, I just use Octoprint instead to do that, yes its one step more then just simple direct uploading, but the extra things that Octoprint can do is just too good to pass up. Especially speaking of the exclude gcode zone, so if you have a mass print going of a bunch of parts, but one of the parts is starting to fail or warp or threaten to ruin the whole print, you can instead just exclude that area of the print. The print will continue as normal only skipping the area highlighted in the Gcode, this can save a print from otherwise failing a 30+ mass print by allowing the remaining 29 to finish. Octolapse is also very nice to have, giving you timelapse's already compiled for you of your prints. Its just a nice way to manage your printers, and you can even do that when not at home using Octoeverywhere. Allowing you to check in on your prints while away, and can stop a print or exclude areas if you see something going wrong, all from your phone.
One of my printers is a MP Voxel that has built in WIfi and the slicer program for that one is kinda specific (Flashprint MP) but allows direct printing. That printer is, for the most part, the test printer since its smaller then the twin Neptune 2's.
This video was very timely for me. I've just got my first 3D printer, I used the slicer that came with it (Flashprint) to print a Benchy. I am just about to upgrade to a larger SSD, and dual boot into Windows 10 and Linux. I was going to install and learn Cura, but now I will try Superslicer instead. I'm starting from scratch so I have nothing to unlearn!
Im thankful for this as I am trying to figure this slicer out.
Hi Man like you I'm fed up of S3D as no new improvement had been done so far. I believe that S3D (is) was one of the best slicer on the market but now I'm really curious to try SS. Thank you for bringing this to us!
Definitely gonna give this a try. Just one printer in my case so nice to set and test all the settings... just for one printer 😋
Thanks for sharing and looking forward to see whether you'll stick to it or not and if so which improvements you'll apply.
I'm a Cura user, but I just got a new machine, the Artillery Sidewinder X2 and I'm working through the calibrations (helpfully provided by Michael so thank you for that!). May as well switch slicers and give this a try. The built in calibration steps sound really interesting.
I've only been printing for about 2 months now using Cura, but this video convinced me to give SS a try for comparison. I hope it isn't too confusing at my stage of exposure to printing, but it looks promising. Thanks.
I use prusaslicer for my original i3 and clones, as well as my mini, but I’ve stuck with cura for my home builds and vorons. I think I’m going to standardize on superslicer, now that I’ve seen it. Thanks for the video- this kind of overview is exactly what superslicer needed.
One great feature is ability to play with layers width/spacing and gap… but this is still a bit obscure 😅
Would be great to get a deep explanation video on how we should handle this 😊
Thanks for the great video! Been unhappy with cura recently even after using it for years so gonna try SS for a bit. With the few test prints i've done. I really enjoy the layout/UI more than Cura.
I'm sold! It has everything I liked about cura, and fixes everything that was super dumb, plus it has those awsome support painting features and custom configurations for specific areas and layers! Thank you Michael soo much for this video!
It’s true that all the features are included, but unfortunately it still doesn’t print as nicely as Simplify3D.
The corners of the calibration cube are over-extruded. When reversing, the nozzle stops for a moment and then extrudes. This has already been resolved in S3D. Much faster, prints much nicer.
It is no accident that so many people bought it. I think the print core is the best. If you get the new features that your competitors already know, you will be the best.
@@jakabgipsz4788 none of that is true - must be your settings in SS. It is far superior to S3D for quality.
Just trying it, it looks brilliant. Thanks for the tip! Damned if I can find the setting for support density, though!
I really agree with your point around minute 3. I have a similar mindset with an engineering program I use at home. I will definitely give it a shot because I have been used to prusaslicer since I started about a year ago
Looks like I MUST upgrade from 32 bit old Windows machine to 64 bit. Been using Cura and Slic3r for 7-8 years. The selective support selection is a must! I like the new surface finishing, too.
I've just moved down to 0.3mm nozzle, 0.1mm layers, still using 3mm abs and made a new heatbreak, to replace the one that split/broke. Mendelmax DIY build direct extruder. Very accurate and fast. Nice video. Thanks.
Great and timely video. I also purchased S3D a little over a year ago, so that I could print parts for my OmniaDrop direct drive units. The lack of updates and communication is very frustrating. I am lucky as mine still works. I think I'll test SS and see how it works for me. Thanks for the video. It looks like at the end you were trying to remove supports from and OmniaDrop main body.
Well spotted. That was remix of the main body to suit the Xchange system. Expect a video in the next couple of weeks.
@@TeachingTech I have 4 on the X-change. I am redesigning the new V2.1 mount for it and for my RAT RIG. I'll post something on Thingiverse soon
Going to try supersclicer now. Thanks for the video.
Yep, probably going to switch to this. Many thanks.
Cool, it looks like they integrated some of my favorite Cura features which I can't live without, such as ironing. I might give it a try.
I've been using Cura for 1 1/2 years, and Prusa slicer from time to time, am going to give this a go. I agree with the layout of Cura not being friendly to quickly see settings etc. Thanks as always for your thoughts and research. I only run Samsung drives, EVO ones have been great, no issues like yours.
Thanks, Ive been using Cura since day one and have like prusa once or twice so will give this a try. cheers
I'm excited for you to further explored Super Slicer because that means we will soon get handy informational videos about its features, functions, tips and tricks
DANKE!!! Great Content and I had always trouble to get rid of the Prusa Settings :-)
Add me to the list of people who never heard of it, but want to try it. I'm a Cura user - I hope the nomenclature is similar enough that I can reduce the leading curve somewhat. If Cura had the tabs rather than a long accordion style interface, there would be no need to change iMO.
A lot of terminology will always be the same :)
The remaining point missing from PrusaSlicer/SuperSlicer: FDM Tree Supports.
A big advantage of superslicer/prusaslicer imo: clear division between print, filament and printer settings. Neither S3D or cura do this perfectly imo. Makes for a lot easier workflow if you use multiple (functional) filaments often, as I do with my Toolchanger. So you can use the same print profile for different filaments, and only have to change the Filament profiles to adjust for temperatures, cooling, max volumetric rate etc., in cura you have to maintain profiles with every setting for each Filament, even specific for the first or second or third extruder.... PITA!
@@NEutebach I still find cura much easier to use especially with the search. And the cura Arachne Beta with variable layer width is the the best improvement by far if it doesn't fail to slice. No more stupid small sections of lines that can't be filled with fixed width extrusion
@@MisterkeTube Hmm, well I use tree support a lot....Hopefully SS will get a version of it at some point soon!
I started out with an Ender 3 and then converted it to klipper. I've been using PrusaSlicer since buying a Mini when they were originally released and have been very happy with it. I added a MK3S+ and now am building a Voron0.1. I've just run through some g-code comparisons of the same model between PrusaSlicer and SuperSlicer and SS appears to have some better logic behind perimeters and feature printing, for example on my model, SS runs the external perimeter earlier than PS does. External perimeter speed control is something that should have always been in PS. I think the additional settings in SS will be crucial for tuning my Voron0.1 and I'm looking forward to running some model comparisons on my mini between SS and PS gcode. Thanks for what you do mate! I've learned some great things and have solved quite a few issues with the help of your videos.
I’m definitely checking it out. Thanks Michael.
Like you, i was an early adopter of S3D, and even today i still use it as my only slicer, perhaps it's time I like you, look up newer and perhaps better options. Thanks for going throw it.
Thank you for this video. I have been using Cura since July and was spoiled by the easy quality I can get with it but felt it wasted to much time in some of the paths it generates. And would at times get lost in the accordian menu. I started learning Prusa slicer and made a good profile for my Elegoo Neptune 2. I have gotten some great prints so far with it. But it seems this super slicer may be a great option, specially since I have learned how this style interface works compared to Cura.
Have never heard of it, will try it out immediately.
Dang! that's nice! I was wondering and getting frustrated with Simplify 3D's lack of updates and not a big fan of Cura. I'll try this.
Perfect release timing, I just had an unexpected need to reinstall windows as well. I am in the process of setting my printers us as well. I think ill give Superslicer a shot.
Thanks for sharing. As a new user to the 3D world. I am using cura, but would love to learn a lot more on this super slicer. seems so much more complete.
I had no idea about this! It looks awesome!
i am still trying to find a slicer that i like and understand that is easy to work with but as of yet not so lucky so now i will try super slicer and see how that goes, by the way your videos are very informative and i use them a lot to learn from so keep up the good work
I actually just switched to superslicer today and then saw this video! Im a fan already I must say
Thanks for the info. Just doing my first prints with this slicer and already I like it better then cura. And it's open source! 😊
The registry is actually stored in files that can be opened from the old drive with the registry editor. There you could export those parts that belonged to s3d to a .reg file that then could be imported in the new windows install…. But if you are convinced to movo on, do it. We all can learn from your experiences…
I was just about to say the same thing. For some reason a lot of people are afraid of the Windows registry but it really isn't that hard to understand and it is easy to open a registry hive that is "offline" either from a drive connected externally or from a backup. Once you do it a few times, exporting and importing registry keys isn't that much different than copying files.
I’m sure it’s a painful nightmare to translate from their idiosyncratic registry format to a different idiosyncratic format useful for another program. Being in registry doesn’t make it too much worse.
I have tried bringing my printer config from old repetierhost installation that way. It didn't work, apparently choking on newline characters being messed up upon export->import. Ended up reconfiguring repetierhost from scratch, it wasn't too hard, just annoying.
This slicer seems exciting! I'll have to give it a chance!
Definitely going to give this a go - S3D has felt pretty stale for a while now (been using it since 2015), and I've been spending the holidays updating the mechanics on my large printer. Might as well update the slicer while I'm at it! Being able to change settings within an XY region within a layer looks pretty nifty.
Awesome video, more content about SuperSlicer please. I currently use Cura, but I was never happy with the interface and usability. I would therefore like to switch. 😀
Checking out this slicer now, thanks for the video about it. I didn't even know it existed.
I've been watching this 3D printer space for what seems like ever (I'm old enough to remember before the internet) but I've just finally actually obtained one (thanks to my cousin!) and so I've been diving into slicers in earnest. I had tentatively settled on PrusaSlicer over Cura after first couple of days, but now I'm on SuperSlicer due to this and other videos of yours. I'd only had enough time to alter a few settings and only have 1 printer so it was a very easy "move" for me, but I feel like it would have been worth it regardless. Thank you for your videos, I hope this comment was long enough to help the algo push more people your way 😂
Thanks for this. Just downloaded SS, and will be playing around with it to see if it will be my new slicer. I'm coming from Cura, and am in the process of figuring out how to convert my Ender 5+ to 2in2out via a knockoff chimera hot end. Cura doesn't seem to allow changing my E5+ profile to duel extrusion, so SS will be interesting to try. :)
im on prushaslicer and honestly i didnt know how to activate half of the stuff you showed today !!! it might have not been about how to use the slicer but i learned alot
Interesting, I actually bought S3D because I saw you using it in your videos. I've only been using it for a bit of time now so I have only had experience with versions 5.0 and up and I really like it. Hopefully, they stay on top of cutting-edge options since I had to shell out $200 for it.
This is my favorite and main slicer.
I isn't think I'll be switching away from it unless something major happens.
This looks great! Thanx for sharing!
Wow this the best “upgrade” I have ever made to my 3d printing experience my e3v2 has been modded substantially with linear rails dual z axis micro Swiss direct drive Jyers firmware and full size sd card reader upgrade but the biggest improvement in print quality I have achieved is with the calibration tools in super slicer I regularly use cura and Prusa slicer both of which which are great in their own right but this slicer is a gem
I use Cura for my Filament printing and a combination of PrusaSlicer and Chitubox for resin ... can't wait to give this a try.
Wow I just watched your video and it was very helpful I think I will try it and thank you for the video
great video will be trying it out, i swapped to lychee for resin printer and that was so much better than the common software, been having some issues with odd behaviur on cura. So we will see how this goes.