thank mr. and 1 question. what tipe of wpl dinamo. AC or DC, and i want do some improve with dinamo printer, the dinamo is DC type. what do you think about that. and any problame can i have with the default electric of wpl c24-1. let's discuss mr. thank you and nice video.
WPL official says to use it at your own risk. I have ordered two so I'm gonna put one on the FY-004A and one on the B24, wish me luck. While I think this is a bad idea, try finding a 260 motor instead, it should be fine to run them instead of 370 which is probably too much for the Basic Electronic Pack. Get the RES-V3 if you are keen on the 370 motor.
It should work but you run the risk of burning the stock receiver. Try to not to go full throttle too much, use it sparringly. The better RES-V3 transmitter/receiver at WPL's own website however can support it officially. Just find a 260 motor instead if you are not confident, it's easier to install (they use the same gearbox) and it shouldn't burn the receiver. I have upgraded 3 out of 5 of my WPLs to use the 260 and they work wonderfully.
for your reference, bulldog-army.com/bulldog-metal-transmission-gearbox-370-motor-with-drive-shaft-upgrade-accessories-for-wpl-c14-c24-b24-b36-mn-d90-mn99s-rc-car/
Good video, was a lot of help. Subscribed.
Nice upgrade👊🏻👍🏻
Great video super modification I did the same with my model now it is stronger at lower speed,
It has more speed?
No🤷
@@lukaszpbear6 but it has more torque i think
@@lxrcxl a lot of power 😁
@@lukaszpbear6 👍🏼thanks for the answer
Thank you!
Nice Upgraded Video😍
I have my C14 upgraded with about 80% metal and still 180 motor and gearbox is normally strong, with MN D90/91 tires it can climb everywhere.
Is a servo stock and is servo fp?
@@Tinvan_real No, 9G 3kg torque
What metal upgrades
Very good
Tanks
Good 👍👍
Did you replace the stock ESC too?
👍👍👍👍👍👍
👏🚙
Do you have to add new axles for the 370 motor or can you use the stock axles on the 370 motor?
you can reuse the ones you already have
Its a fun upgrade to burn ur stock board lol
I have other driven shatf and not intro in the frame is little Long size.
Les. Cardents. Métalliques. Sont. Fourni avec. Le. Moteur. ?
I don’t understand the significance of putting the brass pinion gears against the stock diecast ring( axle) gear ?? Any particular reason ?
The brass pinion gears are fit for the metal axle. When you buy the set, that included.
using this dinamo do you need change the remote to. or just using default remote and esc.?
Hi, I haven't change the remote and esc.
thank mr. and 1 question. what tipe of wpl dinamo. AC or DC,
and i want do some improve with dinamo printer, the dinamo is DC type. what do you think about that. and any problame can i have with the default electric of wpl c24-1.
let's discuss mr. thank you and nice video.
@@ernestoutright6265 The motor is DC.
Where can I buy this?
Does the parts from C24 fit without a problem to C24-1?
Mayb
im confuse, does the stock board support a 370 motor without burning??? thank you
WPL official says to use it at your own risk. I have ordered two so I'm gonna put one on the FY-004A and one on the B24, wish me luck. While I think this is a bad idea, try finding a 260 motor instead, it should be fine to run them instead of 370 which is probably too much for the Basic Electronic Pack. Get the RES-V3 if you are keen on the 370 motor.
What's changing from upgrade the motor? Is it for torque or top speed?
It is for torque, the speed will slow.
Pas. De graisse. Dans. La boîte. De. Vitesses. ?
Does that motor work with stock wpl controller/receiver?
It should work but you run the risk of burning the stock receiver. Try to not to go full throttle too much, use it sparringly. The better RES-V3 transmitter/receiver at WPL's own website however can support it officially. Just find a 260 motor instead if you are not confident, it's easier to install (they use the same gearbox) and it shouldn't burn the receiver. I have upgraded 3 out of 5 of my WPLs to use the 260 and they work wonderfully.
Whats the music?
Just free choice from the web... I forgot the name.. Would you like it?
Yes please😊
Why not do it right, and put the brass ring gear on the axle shaft with the brass pinion gear ?
What is your meaning?
Where did you get that motor
for your reference,
bulldog-army.com/bulldog-metal-transmission-gearbox-370-motor-with-drive-shaft-upgrade-accessories-for-wpl-c14-c24-b24-b36-mn-d90-mn99s-rc-car/
What battery is that
7.4v
Do you need the 7.4v battery and receiver to run that motor?
Is it waterproof i want to buy it
the original is not waterproof
Oh
Pcb nya ganti apa bawaan kak
Jauh bener mainnya bang
How to battery time
about 20-30 mins
Adde lankave kollek