I used to be the same. However if you need to pull for a break with the fg knot, 95% of the time your line snaps at the hook. No need to keep tying a new leader on
I like putting in one half hitch after the wraps to hold the knot together, then pull on the knot to get the binding grip of the wraps and get the stretch out, then finish with rizuto if I have time and I'm going to be casting a lot, or finish with half hitches if I'm in a rush and there is a hot bite. Half hitches are fine, but you have to keep an eye on them if you're doing a lot of casting as they can move up the line and unravel the knot.
I slowed down the playback speed to understand this but watching it from a smartphone and having my 2hands on both main and leader line it's hard to follow this cuz I need to pause and play the video. This is very helpful tho.. It's just, I think I need a picture diagram than a video, sorry :(
Is this knot recommended also for small lines like 5lbs? And if yes how many turns would be ideal? Does it vary for small lines? Thank for your great videos
Yes we salt water bream fish here in oz and the FG knott is popular bream don’t weigh more than 3 pounds they use 4 to 6 lb braid and 6 lb Fluro carbon mono
Unique way of showing the build. I never finish with just half hitches though, every time I do my knot unravels. Not a problem since I started using the Rizutto finish. 🍻
@@megashlengovender3806 I have used super glue and pliobond as well. Both seem to help with keeping the Rizutto from unraveling. I also leave the tag a little long now as that also seems to help.
Opposite for me. I used to finish with the rizutto but it came undone too often. Now I’m just doing 4-8 half hitches and I had never any issues (alternating directions for those half hitches though!). I’m also doing half hitches on the leader+braid instead of the full hitches shown here (again alternating directions).
This tutorial is deceiving tho. Make sure that after the first half hitch that u do after u wrap the mono or fluoro, u need to pull the main line and the leader line supper tight (wear gloves). U need to pull until the braid is almost translucent. You will see a difference. The point of this knot is for the braided line to dig into the leader line and make almost like a screw or finger trap. That way it will never loosen on u while fishing.
Love the knot , but it can eat up some line And it’s not the fastest to tie Works well tho If I’m in a hurry I’m def going Alberto Even if I get a tiny little guide rub
@Emmanuel Goldstein I can only speak for my conditions. I'm from Germany and I'm fishing for Zander (very smiliar to walleye, but Zander get bigger) in the river Rhine. There are many sharp stones in the river and therefore I need to use a quite strong leader. I'm using 0,40mm fluorocarbon as leader. But I also need a throwing distance of 70+ meters sometime and therefore the main line can't be to thick. I'm using a 0,12mm braid line as main line with a strength of about 11kg (24lbs). So the leader is over three times the size of the main line and the double uni doesn't work so well. So I'm using the FG-Knot and it never broke
@Emmanuel Goldstein truly experienced fisherman understand that there are many scenarios where your leader is required to be much thicker than your main line, your comment just shows your lack of knowledge. Layman speaking arrogantly on a topic he knows nothing about
Good basic demo but good help anyone who doesn’t understand the basics of the knot and when to cinch down etc. check salt strong FG knot for better instructions
Just loop left and right 13 times and then tie granny knots until it doesn't slip when you pull the leader, then tie a few more, cut off the top of the mono, and tie a few more. Granted I've tied 1 one of these in my whole life but it seems to have worked. Doesn't look as pretty though
The next big innovation in line will be the elimination of knots between braid and fluorocarbon and use of a bonding agent and/or a small micro sleeve each line end can feed into and be sealed with heat or epoxy to bond the two lines together. People hate tying knots and a good engineer will put an end to the cumbersome knots. I am working on some innovations now to solve this problem..
Two Tuna friends of 25lb each one are talking underwater, after a fishing boat passed over them, one Tuna says: Hey! Watch that delicious Bonito! Looks like someone is using some kind of futuristic "innovation" technique to join the fishing line with the leader! The other Tuna friend of 25lb says: Hold my beer!
めっちゃ綺麗に結べてるやんすげぇって動画見たらCGやったw
1発目のハーフヒッチの後に締め込まないと大変な事になりますよ
I've tried so many ways and I got it first time with this video
サムネ見て『スゲー!CGみたいなFGだっ!!』って思ってみたらCGだった
I used to be the same.
However if you need to pull for a break with the fg knot,
95% of the time your line snaps at the hook.
No need to keep tying a new leader on
誰か和訳してくれ
Aloof Camper この人多分返信するコメを間違えているので気にする必要はないと思います(⇦和訳ではない)
I like putting in one half hitch after the wraps to hold the knot together, then pull on the knot to get the binding grip of the wraps and get the stretch out, then finish with rizuto if I have time and I'm going to be casting a lot, or finish with half hitches if I'm in a rush and there is a hot bite. Half hitches are fine, but you have to keep an eye on them if you're doing a lot of casting as they can move up the line and unravel the knot.
The best Knot fishing
FG ? The best knot. The best presentation.
I slowed down the playback speed to understand this but watching it from a smartphone and having my 2hands on both main and leader line it's hard to follow this cuz I need to pause and play the video. This is very helpful tho.. It's just, I think I need a picture diagram than a video, sorry :(
Same as me😂 so hard pause play
There's only 2 steps my dude 😂
@@retardedsandwich101bro please teach me ☹️
Is this knot recommended also for small lines like 5lbs? And if yes how many turns would be ideal? Does it vary for small lines?
Thank for your great videos
Yes we salt water bream fish here in oz and the FG knott is popular bream don’t weigh more than 3 pounds they use 4 to 6 lb braid and 6 lb Fluro carbon mono
@theimpaler5034 thanks
How many turns are recommended for 5lbs line?
Definitely the best line-to-leader knot there is, but I can't bring myself to use it because it's just so much slower to tie than the Alberto
ここまでやってくれる機械開発して欲しい。
Fg knot never failed me..
but life did?
@@gsfishing5384It clearly failed you, boy.
こんなに綺麗に組めたらなー
Forgive my ignorance but does fgn stand for f*****g good knot! 😂
Bermanfaat mas itu lilitan nya berapa banyak n kunci lilitan nya berapa banyak editing nya keren banget
Unique way of showing the build. I never finish with just half hitches though, every time I do my knot unravels. Not a problem since I started using the Rizutto finish. 🍻
Roger that. Not sure if it’s stronger or not, but after I started using the Rizutto finish, way less problems with unraveling
In SA we add some super glue onto the not as well or uv knot sense
@@megashlengovender3806
I have used super glue and pliobond as well. Both seem to help with keeping the Rizutto from unraveling. I also leave the tag a little long now as that also seems to help.
Always finish with rizutto never fail
Opposite for me.
I used to finish with the rizutto but it came undone too often.
Now I’m just doing 4-8 half hitches and I had never any issues (alternating directions for those half hitches though!).
I’m also doing half hitches on the leader+braid instead of the full hitches shown here (again alternating directions).
Cihuyyy,triknya brother 🤙
原理は簡単だがいざ組むと難しいんだよね。
慣れれば簡単だけど。
SALAM dari Jogja Bantul kota hadir maz bozz mantap bener infonya
SALAM PENAK MANCING maz boz
nice vid, missed the pulling part for some reason?
Saya suka dengan video ini 👍👍👍🤙
The best knot
Sangat bermanfaat bila di aplikasikan pda saat mancing di kpl
Mantappp
美しい縛りでした
Nice video enjoy for watching
Good ... Very good ... Easy to learn. Tq. Bossku .
Ngam²
So very clear explanation... I'll try to make it ... Thanks
This tutorial is deceiving tho. Make sure that after the first half hitch that u do after u wrap the mono or fluoro, u need to pull the main line and the leader line supper tight (wear gloves). U need to pull until the braid is almost translucent. You will see a difference. The point of this knot is for the braided line to dig into the leader line and make almost like a screw or finger trap. That way it will never loosen on u while fishing.
Need more trying carefully n oftenly
堀田式ノットですか?似てます。
毎回正しく結んでるんですけど、手で引っ張ってみると
必ずpe側直前で切れます、濡らしてるし擦れないようにしてるのに
要らぬアドバイスだったらすみません
最後の結び方でPEを折ってしまっていると思います。
村岡さんのFGノットの解説で言ってました
Thanks for sharing...new friend...Godbless as all...
Love the knot , but it can eat up some line And it’s not the fastest to tie Works well tho If I’m in a hurry I’m def going Alberto Even if I get a tiny little guide rub
I appreciate the art of how the tie is done, but I'm a double uni-knot believer
Then you’re a believer in a weaker knot
@@Scatterpattern plus the double uni doesn't work so well with two extremly different thick lines
@Emmanuel Goldstein I can only speak for my conditions. I'm from Germany and I'm fishing for Zander (very smiliar to walleye, but Zander get bigger) in the river Rhine.
There are many sharp stones in the river and therefore I need to use a quite strong leader. I'm using 0,40mm fluorocarbon as leader. But I also need a throwing distance of 70+ meters sometime and therefore the main line can't be to thick. I'm using a 0,12mm braid line as main line with a strength of about 11kg (24lbs). So the leader is over three times the size of the main line and the double uni doesn't work so well. So I'm using the FG-Knot and it never broke
@Emmanuel Goldstein truly experienced fisherman understand that there are many scenarios where your leader is required to be much thicker than your main line, your comment just shows your lack of knowledge. Layman speaking arrogantly on a topic he knows nothing about
@Emmanuel Goldstein double uni is weaker and doesn't go through the guides as smoothly.
Thank you bro
Istimewa
Very nice method my friend.👏👏👏👏🦈🦈🦈🦈🦈🦈
Terimakasih banyak kakak ilmunya,nanti saya akan coba.
Salam YT pemula 🙏🙏🙏
Cách nối dây này rất chắc
best tutorial video ever found
さすがサンライン!
めちゃくちゃ分かりやすい!この動画は。
Der sieht ja richtig clean aus! Bekommt man den so auch in der Realität gebunden?
Good basic demo but good help anyone who doesn’t understand the basics of the knot and when to cinch down etc. check salt strong FG knot for better instructions
Wao mantap pak
very nice and awesome tutorials bro
new fishing friend here from abu dhabi
Sangat simpel dan kuat pastinya
Terbaik ini 👍👍👍
Всегда им пользуюсь 👍🏻
Nice, who makes your animations
Nice sharing👍😊
สวยงาม👍
I see it happening on the video. Doesn’t happen in real life. Am I restarted?
Just loop left and right 13 times and then tie granny knots until it doesn't slip when you pull the leader, then tie a few more, cut off the top of the mono, and tie a few more. Granted I've tied 1 one of these in my whole life but it seems to have worked. Doesn't look as pretty though
これはいい結びの仕組みが良くわかる❗
動きが可愛い❤︎
Yucatan knot vs fg knot ? What iş the test kg /lb ?
For 0.4mm :
FG Knot : 4,283 kg
Yucatan: 3,400 kg
Double Alberto: 4,192 kg
Carrot: 3,382 kg
Albright knot: 2,751 kg
Surgeon: 2,979 kg
Mana leader mana pe????
It seems like great thing, I'll try it for shure 👍
Best vid tutor ever..👍👍
It's Amazing😱😱
意外といいかも!
As a novice -are you wrapping the braid over fluro or other way ? Or doesn’t it make any difference?
You wrap the braid on flouro/leader
Braid is stronger, more abrasive resistance and flexible. Always use braid to wrap your leader for any knot
締め込みは??
今日😅
FGノット出来る自分が見ても分かりにくい。それを一般のTH-camrとかではなく、ラインメーカーが出してるなんて...凄い会社なんですね!
わかりにくいか?よっぽど理解力が無いのねw
FG 👍
サンラインさん!
こんな自動でノット組んでくれる
ライン発売してください
練習したら簡単
@@TheYoshikeso
普通にできるけどな
Thank you excellant
awesome
Rizzuto finish is recommended
actually it doesnt matter
@@huudinii123 why not??
@@huudinii123 Actually, it does.
Awesome simulation 😍😍
The next big innovation in line will be the elimination of knots between braid and fluorocarbon and use of a bonding agent and/or a small micro sleeve each line end can feed into and be sealed with heat or epoxy to bond the two lines together. People hate tying knots and a good engineer will put an end to the cumbersome knots. I am working on some innovations now to solve this problem..
We are fishermen and take pride in out knots I’m sorry but your invention is not needed cause us real fish guys LIKE to tie it’s relaxing to me
Two Tuna friends of 25lb each one are talking underwater, after a fishing boat passed over them, one Tuna says: Hey! Watch that delicious Bonito! Looks like someone is using some kind of futuristic "innovation" technique to join the fishing line with the leader! The other Tuna friend of 25lb says: Hold my beer!
めちゃおしゃれやん
Which one is braided main line and which one is the leader?
Louis T white one is braid and the other one is leader
We all need this knot which takes half of the fishing day to built it😅😅😅
Mantul
どっちがpe?
Very nice 👌
やり方は間違ってはいないが間違いなくすっぽ抜ける。
これ堀田さんのやり方だよ?俺もやってるけど座布団エイかけても抜けないよ?
しっかり締めこんでいれば絶対にすっぽ抜けることはない。ただ、釣り場で早く投げたい一心で焦りながら組むと、しっかり締めたつもりでも締めこみが甘くなる可能性があるので、家で落ち着いて組んで行くほうが良いと思う。
kreeen mantapu
毎回とても分かりやすいです。
今後も色んなノットの紹介お願いします。
Thank you for sharing 👍
good
Salam dari 🇮🇩
すごく分かりやすいです
👍👍👍
Mantap
Nice animation bro
❤
Mantap 👍
Nice!!
superrr thanks
nice
Good sharing .im from sabah new Friends done ok
But why u say sabah? not u country Malaysia ? Sabah my place in malaysia its true 👍
Ang galing ah
Tq for sharing sir👍👍👍👍
Baguss👍👍👍👍
Good job guys👍
Very good,, 👍👍
You missed the most important step of cinching down the knot. Without this step, the line is weak and can unravel.
Mantap👍👍👍
Joss mas bos..
Excellent video Well done, I subscribed to your channel
Thank you!
很好