Hi guys. Thanks for the shout out. I really appreciate it. New subscriber here. I have been checking out your channel this morning and WOW, Im ready to come up there after planting next spring. I was at Silver Lake back in 17 with my GMC 2500 and had a blast, I can imaging how much more fun we will have on the SxS. You were talking about St Helen, I used to ride snowmobiles there back in the late 80's. I suppose its the same place. Think it was called Powers lodge or something where we stayed. Thanks guys, looking forward to checking out more of your videos.
I have the kenimoto soft doors and got industrial strength velcro from home depot. I velcro them on the inside of the door instead of the outside and trailer all of the time 70mph no issues
With all the tools you have in your shop, I'm surprised you don't have a quality spring compressor. I used the cheap harbor freight $30 spring compressors a couple times. Decided to buy a quality spring compressor. I purchased the same exact one Shock Therapy uses. Makes changing the springs so easy a Caveman could do it. Jacktech SK 3000
Just waiting for my crossover seals to arrive from eBay. Now I know how to install them. Thanks for the video and keep up the Great work you all are doing.
If you had a shock holding holding up the side window and a latch to keep it down. I think all the northern krx riders would buy them from you. They look pretty clean nice work.
LMAO hands down our top favorite comment ever!!! Len is actually my buddy and he’s not even 10 year’s older then me. Gotta say we are all getting are great laugh! Thanks for watching
If you had limit straps on the springs do you think the crossover would still slap and make noise? absolutely love the hard door upper concepts. Is the black band around the outer edge of the door uppers just painted on the inside?
Odyssey PC680MJ Powersports Battery www.amazon.com/dp/B00249AL9K/ref=cm_sw_r_cp_api_glc_fabc_Hup5FbT06Z0GQ?_encoding=UTF8&psc=1 This is what we use as a replacement. Thanks for watching!!!
Absolutely LOVE the upper doors! I just bought a sheet to experiment with. I hope mine turn out as well as yours looks. Did you have any problem molding to contour? I plan on using a heat gun (very carefully)! Any advice would be extremely helpful.
Great video. I need the quiet rings. If you can, please add an update when you have some time on the km3’s. Lots of folks wondering how the light truck tires will perform on a lighter vehicle. Thanks
Would you guys systematically find, identify for the audience and eradicate all the suspension noises one by one on that X3 please? I have not found anyone anywhere that has taken the time to clearly document all the little noises they make, and specifically what is causing the racket , and how to fix them long term for good.
I appreciate your alls content... So are you saying a 33x12.50 15 will work?? Any rubbing when turning deep and on the rocks?? I wondered if they would work well or not... Appreciate the information guys!
Hi guys. Thanks for the shout out. I really appreciate it. New subscriber here. I have been checking out your channel this morning and WOW, Im ready to come up there after planting next spring. I was at Silver Lake back in 17 with my GMC 2500 and had a blast, I can imaging how much more fun we will have on the SxS. You were talking about St Helen, I used to ride snowmobiles there back in the late 80's. I suppose its the same place. Think it was called Powers lodge or something where we stayed. Thanks guys, looking forward to checking out more of your videos.
I have the kenimoto soft doors and got industrial strength velcro from home depot. I velcro them on the inside of the door instead of the outside and trailer all of the time 70mph no issues
With all the tools you have in your shop, I'm surprised you don't have a quality spring compressor. I used the cheap harbor freight $30 spring compressors a couple times. Decided to buy a quality spring compressor. I purchased the same exact one Shock Therapy uses. Makes changing the springs so easy a Caveman could do it.
Jacktech SK 3000
You guys clearly need to market those doors! Awesome work
Could you guys possibly do a video on building the upper doors please. They look awesome.
Yes we were just talking about it. Possibly soon
The upper doors are awesome. Would love to purchase a set.
Gull wings! Awesome. Those upper doors look great. Just need to add some small gas shocks to hold open.
The krx doors work awesome
Thank you for showing the fix to the crossover clunk. I feel way more confident in doing it myself.
Just waiting for my crossover seals to arrive from eBay. Now I know how to install them.
Thanks for the video and keep up the Great work you all are doing.
Hi. If you ever decide to sell the KRX side door plexiglass set please let me know. I am interested. Thanks
I am as well
Nice to see your smiling faces boys, I was looking forward to getting together for tip up town but I guess we will have to figure something else out
We are still going.
Love the content! My fiance and I went and looked at a krx today for her. She is excited for her first sxs she done being a passenger!
How did the eBay silent crossover rings work did it stop all the clunking noise and how are they holding up ?
GREAT! So far they are holding up and the clunk is completely gone
I ordered a set I’m gonna put them
On this week
The black stuff on the rubber is from the laser cutting process. Basically it's the burnt rubber when I cut them.
Thanks for clearing that up! I figured they were stamped out.
If you had a shock holding holding up the side window and a latch to keep it down. I think all the northern krx riders would buy them from you. They look pretty clean nice work.
Thanks we appreciate it
@@M3OffRoad love the father son bonding combo I wont lie pretty jealous wish my dad was that cool 😎
LMAO hands down our top favorite comment ever!!! Len is actually my buddy and he’s not even 10 year’s older then me. Gotta say we are all getting are great laugh! Thanks for watching
@@M3OffRoad Remember I made number 1. LoL.
If you had limit straps on the springs do you think the crossover would still slap and make noise? absolutely love the hard door upper concepts. Is the black band around the outer edge of the door uppers just painted on the inside?
Only if you have the limit straps tied down to the point that the crossover cups are always in contact with the rings.
Nice video, now if I could get rid of that clunk in my defender!! Do you guys know of a better charging system or battery for these Can Ams?
Odyssey PC680MJ Powersports Battery www.amazon.com/dp/B00249AL9K/ref=cm_sw_r_cp_api_glc_fabc_Hup5FbT06Z0GQ?_encoding=UTF8&psc=1
This is what we use as a replacement. Thanks for watching!!!
Hi. If you ever decide to sell any KRX plexiglass side doors I would be interested.
Absolutely LOVE the upper doors! I just bought a sheet to experiment with. I hope mine turn out as well as yours looks. Did you have any problem molding to contour? I plan on using a heat gun (very carefully)! Any advice would be extremely helpful.
Go with 1/8 Lexan not plexiglass and you will have no problems with the contours. For the frame we used 3/4 conduit
@@M3OffRoad could you guys build these to sell? I really want a set my wrench turning skills are non existent or building things lol.
Will the bfgoodrich fit in the bed of the krx
It should as long as you don’t have the tailgate box
Great video. I need the quiet rings.
If you can, please add an update when you have some time on the km3’s. Lots of folks wondering how the light truck tires will perform on a lighter vehicle. Thanks
Are you going to make more and sell those hard upper doors?
Would you want to make a set of the upper door windows to sell for my krx?
Would you build a set of upper door windows for the KRX to sell?
Would you guys systematically find, identify for the audience and eradicate all the suspension noises one by one on that X3 please?
I have not found anyone anywhere that has taken the time to clearly document all the little noises they make, and specifically what is causing the racket , and how to fix them long term for good.
Just finished the first installment. Found quite a bit. Should be out in the next few days
Usually we say stand clear of Hammer not the other way around lol.
Let me know about the BFG’s do in the snow. Thanks guy’s! 👍😎
Had it up in St Helen during the last storm and it did great! 8 inches plus of snow. I love them!
Wouldn't it be safer to just back off the lock rings, to get the cup off the bottom?
I appreciate your alls content... So are you saying a 33x12.50 15 will work?? Any rubbing when turning deep and on the rocks?? I wondered if they would work well or not... Appreciate the information guys!
They work great. Good size tire for the size of the Machine.
What psi are you running those tires?