@@millionairefarmer. lol.. I had my doubts... I hate dealing with wet batteries! If the fumes don't get you, they can go 💥... We've had really good luck with AGM batteries.
@Millionaire Farmer it works for some and not for others.. now what you could do after a boil and cool is empty the battery into like a 5 gallon plastic bucket save the electrolyte. Then you want to wash out the battery use a garden hose.. fill half way and shake the battery empty that but not in the original bucket.. do that 2 times.. this is extra step take 2 x4 cause they are soft and drop battery from like 18 to 24 inches onto the wood.. then flip it upside-down and spray all the cells with the hose to get out more crud. Let the battery dry completely upside-down for 2 days.. Last you have 2 options filter you old electrolyte and add it back in or buy new acid for 20 bucks and add it until you cover the plates and top off with distilled water.. this process works very very well.. good luck
@@millionairefarmer. one more thing to remember if the water doesn't start boiling almost immediately then you have a dead cell and stop what you're doing because the battery could explode to check each cell use a Multimeter put the positive end inside of each water and the negative on the negative post there should be two volts to each cell going up 2 4 6 8 10 12 if one of them gets no reading then you definitely have a dead cell same things to go with it not bubbling
Your dad is a smart man!! Lol. I’m with him, haven’t even seen the ending yet. Hahaha.
He made it a lot of years without many hospital trips formsure
water takes up more space as it gits warmer
Sure does
I'm confused I was sure I clicked on a video about batteries and apparently it's about being a Canadian farmer
Two for one deal. But I can say I did not have success with the battery
3 for one if u like the cold and snow mate
@@vegetablepolice1 yup
Oh, sure... I gotta wait for part two...
Ed l'm with you there lol
I can save you some time. It DID NOT WORK
@@millionairefarmer. lol.. I had my doubts... I hate dealing with wet batteries! If the fumes don't get you, they can go 💥...
We've had really good luck with AGM batteries.
I have to figure out why only two holes bubbled then three then back to two.
@@millionairefarmer. maybe corroded out, or shorted???
Just be careful messing with it.. you don't want to be too close if it goes 💥
good time of year for a ice bath mate but it might be hard to keep the water from freezing
Cold for Sure
Man that house is looking sweet
Only a week or so away
Them porkers look ready for bacon!! Wind quit here this morning. -23 but feels wayyyyyy nicer then yesterday
Yeah they are pretty far for sure. Butcher postponed till the weekend
Ì have tried a few that do nof work hope yours does
It boiled a bit, but it didn’t work to save the restore the battery
That's way to high of amps.. it won't blow up with the caps off and make sure there is no open flame. That was a very long video lol.. good luck
I wasn’t sure what was required. All I can say is what I did was not successful
@Millionaire Farmer it works for some and not for others.. now what you could do after a boil and cool is empty the battery into like a 5 gallon plastic bucket save the electrolyte. Then you want to wash out the battery use a garden hose.. fill half way and shake the battery empty that but not in the original bucket.. do that 2 times.. this is extra step take 2 x4 cause they are soft and drop battery from like 18 to 24 inches onto the wood.. then flip it upside-down and spray all the cells with the hose to get out more crud. Let the battery dry completely upside-down for 2 days.. Last you have 2 options filter you old electrolyte and add it back in or buy new acid for 20 bucks and add it until you cover the plates and top off with distilled water.. this process works very very well.. good luck
Wow thanks, might have to try that
@@millionairefarmer. one more thing to remember if the water doesn't start boiling almost immediately then you have a dead cell and stop what you're doing because the battery could explode to check each cell use a Multimeter put the positive end inside of each water and the negative on the negative post there should be two volts to each cell going up 2 4 6 8 10 12 if one of them gets no reading then you definitely have a dead cell same things to go with it not bubbling
@@productionapostle1298 thank you very much for that info. I will have to check that.