Tiny Room Renovation - Phase 3 - Prepping Priming and Painting
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2017
- Phase three is complete and this room is really starting to come together. Although painting is my least favorite thing to do on these builds I was happy with how it turned out in the end.
General Store - astore.amazon.com/simpsubulivi-20
Please check us out at www.simplesuburbanliving.com
and follow us on....
/ simplesuburban
/ sustainablesimpleliving1
/ sslfamilyfarm
/ sustainablesimpleliving
Daily Beetle by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Artist: audionautix.com/ - แนวปฏิบัติและการใช้ชีวิต
![fellow fellow - Proud [OFFICIAL MV]](http://i.ytimg.com/vi/9uZF7BlUQPE/mqdefault.jpg)
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
Your rec on latex paint (Behr's Marquee) was agreed with online, 9 of 10 times.
Your little girl is the sweetest, most beautiful girl!!
I'm definitely not a professional painter, but I worked a few summers in home remodeling. A couple quick tips to help your stuff last longer:
-when you take a break, plastic wrap your brush or roller to keep it from drying out
-try to keep the paint in the bottom inch or so of the brush. If it gets all the way to the part where the bristles meet the handle, the bristles will start to splay out.
-best way to wash out rollers: after most of the paint is off, take a garden hose and cover most of it with your thumb to get a really high pressure. With the roller still on the handle, spray just one side to make it spin. As it spins, the rest of the paint will come off and it will be mostly dry. Plus it's fun!
Hope that helps! Love the room and looking forward to seeing it finished!
+Justin Lichtle great tips, thanks!
I'll definitely second the spinning the roller tip! I've been doing that for the last several years. Works like a charm. Just got to make sure you angle the roller just right (or hide behind a piece of cardboard or something) or you'll paint your shoes.
Justin Lichtle atolladero
A wire brush cleans good, just be sure to see go.one way down..and your 5 way has a curve on it to go over paint roller to clean and push out excess. If you dont have a 5 way, get one. I use mine for so much.
Looking really good!!!! Great to see all of you working together!!!!
I just came across your channel tonight, while searching out chicken coops. Have watched about 8 videos of yours so far..with the little chicken coop, tractor/run, solar lights, self waterers....and then came across this LOFT room idea...which my daughter just drew up plans for this morning! "Surprise Mom--i want a loft." So Lucky ME! To have seen all this in one sitting...planning our first little chicken coop on stilts ourselves. LOL Great, full-of-info, articulately done videos! I must say. TY
A Teeeeny bit disappointed to see this section (tiny Room) , and part3 is brand new! And i have to wait now to see the end result of this cute little build. Cant wait to see it all furnished and fit for a queen. ;) Good luck.
Bobbi Froese If you follow his chicken coop style make sure you watch his video on the improvements or changes he would have made. I did and am very happy with the results.
+Bobbi Froese glad you found us! Hopefully you foound the coop plans on our site and please let me know if you have any questions. Next video on this project will be out soon!
Sua família é simples e unida. Amo isso. Aqui em casa, trabalhamos juntos também. Parabéns 👏👏👏
Would have been a good idea to notch the 4x4's so that the 2x4s rested on the 4x4 then attached the two. That way, if for some reason force is exerted on the very corner and the nails fail, the 2x4 gets support from the 4x4 without nails. Much stronger/safer.
Cool DIY stuff. Keep it up.
Good to see the young ones helping, use damp jean cloth to sand as it will stop dust mess, have to rinse once in a while, prime everything once first then assemble
On the last step that you covered because the post was in the way, a hinge or two at the back and a step that lifted would have been a cool hidey hole. I love the way things are looking. Great job.
omg cant wait to see the finish room!
turned out pretty good !
MOM WHY ARE YOU PAINTING WITH THOSE BEAUTIFUL JEANS
Great to see the boss back in the videos! You should be more careful though it looked like you almost got primer in her eye. :)
Love your work, great ideas and craftsmanship. TIP FOR THE DAY, I used a cheap deshedding dog/cat comb to get the last remains of paint stuck of my expensive brushes after washing, swirling, swirling, swirling, and always baby shampoo for the last wash. The bristles come out soft and clean with many more uses. Try it sometime.
+Jodee Loves the Lord that is a great tip, thanks!
looks great
Oi sou do brasil fiquei encantada pela elegancia e bom gosto.amei o que fizeram .parabens pela linda FAMÍLIA.estou assistindo seis videos e aprendendo muito.
Ya painting is a pain sometimes :) Thanks for sharing!!! :)
Drywall mud on wood is new to me but I like the results
Paint 3, 4, 5-- even up to 7-in-1s-- have paint combs in order to clean the brushes, allowing them to be reused many times!
You guys are so cool I made my own loft too 😱😱😱😱😱😱😱😱
I have brushes that are over 30 years old and still in good shape but haven't needed them in over ten years. =)
I bought a Sears airless that pumped from a gallon can to paint my house and was the best thing I could have bought.
I seriously need to get one of those!
Money well spent.
Tiny room very nice BUT! the plywood under the matress should be holed so the matress has air circulation if not every thing rots. 🙂😗
i should have posted this in the other video.. but still not sure why you have the legs on the wall corners? those wall studs will easily hold that frame with just the one free corner having a leg.
expert tip: Caulk all those cracks and crevices.
I realize you said, "pure white", but, there are 50-70 iterations of that. I'm assuming you are buying American, so that'll eliminate some.
Please spec your paint? Color name, brand, which sheen, where, please? Thank you!
how wide are your stairs? I am basically going to copy this design and curioud if 14" width is wide enough.
You did a great job. There isn t much to improve on. I would kept tje integrity of the wood, maybe a white wash finish, if someone who is on a Budget. That paints is nice and less work. But on new construction, anything with with a primer should be fine. I like the spackle , but if In a hurry can use fast dry white caulk over nail and corners. No sanding to deal with. Absolutely no silicone, just caulk. The spackle will have a much smoother finish. Which you cant use if leaving the wood finish. Just trim
can you please give methe exact material item like a mud what kind of brand is this details please thankyou
what kind of putty was used?
Hello sir... Would u tell me pls what is the name of that metal bracket on 02:12
Noob here. What that white thing you put at 0:07?
💞😍😍😍😍😍
Stairwell measures? Plsssss
Keren
Where's the railing?
Can you send me the measurements please of bed thanks
This is why I bought a Wagner power painter lmao.
+Submanca lol, I have looked into those, maybe it is time!
Great idea. I was going to say airless sprayer.
Excuse me, I want to ask. How much buck did you have spent to this renovation?
Total cost was around $1000
SSLFamilyDad oohh, i see. Okay, thankyou very much :D
You missed a spot.
haha jk sorry had to do it
looks good
+Patrick Wagz lol, probably did somewhere!
You said that painting all the little nooks on the shelving units was a real time-waster. If you ever do a similar project again, it may be beneficial to paint the large sheets of plywood first, before building them into the shelving units. Don't worry, I would have built them the same as you, and then painted them after building them. But, it might be better (time-wise) to paint the plywood, then build. ?? Looks good, either way.
+Patrick Wagz that was definitely an option. I am not sure if it would be better or now since I had to do all of the mudding to the rough spots too but it may have helped a little
Purdy
They use Valspar at Lowes--- it's crap. Dunn Edwards or Benjamin Moore paints are awesome. Behr isn't bad, but not the best.
you sounds like hagrid
Simple sustainable living?
What happened to simple suburban living?!!! 😫
They moved.
not that small of a room. thats twice the size of mine