Haha that would take too long! I have done a videos on several already though, and plan on making a shorter one with commentary of things I learned from each booth about their printers.
Where are you at? You can find more things here: 3dwithus.com/3d-printing-events-shows-fairs Industrial stuff is fun too: all3dp.com/1/3d-printing-additive-manufacturing-conference-calender/
Here’s the parts I’m going to try. Running a printer in reduced voltage is a great way to cut peak power consumption, so stepping down to 20V doesn’t really bother me. Should reduce peak power draw by about 1/3rd for the bed and hotend heaters. Gonna take another minute for the bed to heat up, but if portability is the goal… amzn.to/44hoWrV Maybe you’ll have some portable competition at ERRF 😎
@@NathanBuildsRobots I considered that for the backpack but it’s easier to have the battery go directly to the printer. You might have some issues under volting some of the components.
@@NathanBuildsRobots I didn't bring my drone but yes I was the one who spent a few min talking to you and JJ about my FPV videos and mechanical design etc. Also my dad was the one who noticed your printed tie when we were over by the Annex booth.
@@NathanBuildsRobots not yet. MRRF is only 2 hours away from me. Didn't even know it was a thing until 2 years ago. I'm pretty new to the 3D printing world but I think I'm hooked.
@@CandidProle Nice. Well definitely check it out next year! It's a great way to help decide what your next project should be. Seeing all the printers in person is a really unique experience.
Thank you for showing us all of these cool printers and hardware. Nobody else is really doing that.
Lots of really cool printers. So many different designs....
"When it works it works" accurate summary.
What would be even better is a printer that works when it doesn't work!
I really hope for a dedicated video for each and every one of these
Haha that would take too long! I have done a videos on several already though, and plan on making a shorter one with commentary of things I learned from each booth about their printers.
I wish i lived closer to one of these events
Where are you at? You can find more things here:
3dwithus.com/3d-printing-events-shows-fairs
Industrial stuff is fun too:
all3dp.com/1/3d-printing-additive-manufacturing-conference-calender/
@@NathanBuildsRobots florida, who wants to bring filamnet to the most humid state 🤣
Really good to see thanks…. Laurie. NZ.
I have to make Saturday...because...Sunday was Dead!
I skipped Friday and most of Sunday. There's only so much MRRF one can handle. It's kind of nice with it being a little emptier. Overall, a good show!
12:36 "That dog looks so realistic! Oh, wait.."
It probably hated all the high frequency noises from the printers.
@@NathanBuildsRobots 😂Poor doggo. Such a cutie!
Good times! Did you see my printer I was pulling around in my wagon?
I must have missed it. There were too many printers 🤤
Thanks for filming the 3D printer backpack. It was great meeting you hope to see you at the other RRF shows.
I just got some USBC power negotiation chips, I think I’m going to be able to run my Ender 2 pro off of a 140W USBC power bank
Here’s the parts I’m going to try. Running a printer in reduced voltage is a great way to cut peak power consumption, so stepping down to 20V doesn’t really bother me. Should reduce peak power draw by about 1/3rd for the bed and hotend heaters. Gonna take another minute for the bed to heat up, but if portability is the goal…
amzn.to/44hoWrV
Maybe you’ll have some portable competition at ERRF 😎
@@NathanBuildsRobots I considered that for the backpack but it’s easier to have the battery go directly to the printer. You might have some issues under volting some of the components.
Loved talking to you man!
Thanks. Are you the grainy FPV Drone video guy? 😅
@@NathanBuildsRobots I didn't bring my drone but yes I was the one who spent a few min talking to you and JJ about my FPV videos and mechanical design etc. Also my dad was the one who noticed your printed tie when we were over by the Annex booth.
Hope I can make it next year!
Do you go to any of the other reprap festivals?
@@NathanBuildsRobots not yet. MRRF is only 2 hours away from me. Didn't even know it was a thing until 2 years ago. I'm pretty new to the 3D printing world but I think I'm hooked.
@@CandidProle Nice. Well definitely check it out next year! It's a great way to help decide what your next project should be. Seeing all the printers in person is a really unique experience.
2:48 What was the system that printed the miniatures in color?
It was some really expensive full color inkjet printer from a Japanese brand
@@NathanBuildsRobotsMimaki uv-cured inkjet the quality is impressive.