1969 Camaro LS Swap update and parts overview
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Below are some of the parts I have used so far. Let me know if you have any questions.
Power steering line:amzn.to/2pnbKDf
PS adapters:amzn.to/2IUER7F and amzn.to/2BqdOx7
Radiator: amzn.to/33zE0kJ
Fuel line adapter:amzn.to/2oAiAoY
Alternator:amzn.to/2MI9kHl
Throttle cable:amzn.to/2Mk9aqk
Motor and trans mount: www.cxracing.c...
All videos posted to the Classic Octane TH-cam Channel are for informational and entertainment purposes only. Classic Octane, LLC highly recommends that you engage with a professional mechanic when conducting repairs on your motorcycle. Classic Octane, LLC assumes no liability for anything you choose to do to your motorcycle before or after watching one of the videos or utilizing the content from this TH-cam. All repairs or modifications you perform to your motorcycle are made at your own risk. All content is on the Classic Octane TH-cam Channel is exclusively owned and copyrighted by Classic Octane. Any illegal reproduction of this content is a violation of the law.
I've got a 68, been wanting to do this to, so big thanks for the motivation. Great show, I didn't see anything that I would change. Killer.
Currently have a 1970 chevelle with ls3 swap and t56 6-speed transmission. Fitting all of it is easy. The wiring I went with terminator x max from holley and it was plug and play. Hardest part is the money aspect I would totally agree the small things add up. Great video
I just found your Chanel and I have to figure out the tr6060 instal trans tunnel and clutch cylinder. You have great explanations that are very detailed. Thank you for the content.
The camera was so clear. And great content.
Wow you really know your stuff, I didn't know there was so much involved in an LS swap. I'm actually in the market for a 69, found one online with an LS2 already done. But now that I watched your video makes me hesitant if I purchase I might have to deal with costly repairs if things go out compared to a traditional set up. I kinda feel I wish I knew someone to peek at the listing and provide feedback on it. Good detailed video..
Video quality is fine. So is that Camaro.
Been dying for this video. Keep up the good work
If you put a 4 guage crossover wire from the positive terminal to the negative terminal on the battery the alternator will go into automatic balance mode. So the pigtail connector will not be used
So you're saying short the battery out. Ok
Do you remember what headers you used?
what headers are you using bud? nice build
when you replaced the front oil sump pan what oil pan did you go with? also how did you install the new oil dipstick into the block?
Great video as always, Taylor. What tires are on that new customer build?
Question, i have an LS2 as well thats coupled with a T56 already. Can i bolt on the whole thing to the car or is better to separate the engine and T56 and then bolt it on? Would do you suggest?
Super nice car man can I ask what you ended up doing about ur alt. Wiring
What brake booster did you use,Do you have a T56 transmission,and if you do ,did you use the same pedals for the brake and for the slave cylinder ,Thank you really would appreciate the info.
How do you like those seats? I just bought some for my 68.
Did you go with close or wide ratio t56? And where’d you get yours from?
Have a question Did you use the stock Throwout Bearing for the gto And just add the adapters
Yes, stock replacement with the adapters for the bleed line and the line to the master.
@@ClassicOctane Thanks for the help
holly makes a 4 pin part number #197-400
Did you use an LS Swap kit or no?
what 6 idiots gave a thumbs down.... very informative.. thank you
Please dont use a tablet it's just so tacky and I hold you in high reguard and yes I know gauges are not cheap but just ugh on the tablet idea
What about Autometer gauges as a cheaper alternative to Dakota Digital?
looks like the drivers side header is hitting the steering box?
No it has about a 1/4 inch clearance.
cool are you not concerned about the heat on the steering box? the only reason i'm asking is because i'm getting ready to do the same thing to my 69 camaro and i just want as much info as possible.
@@jcook69camaro It's not any closer with these headers than the old SBC headers so hopefully, it won't be an issue.
Awesome work doing a truck motor swap at the moment @migs_69camaro
painless wiring has the connector for your alternator.
what brand and part number header did you use.
The best thing to do before starting a big project is get a good reasonable estimate of cost and time and then double both then double the time again. That'll get you close to the actual numbers....
Thanks for the PS line items and info.
Whats a ball park cost of doing this swap?
Keep up the awesome work!!
On your conversion that you did on your Camaro when you put in the T-56 could you have made it fit in the factory hole in the transmission tunnel without modifying at the way you did reason I ask is my 67 Camaro powerglide car and I want to convert it to a 6-speed without modifying the transmission tunnel if you can please send me an email and tell me how can a T-56 be put in a 67 without modifying the transmission Channel and anyway or any shape thank you for help and my name is Gary
This video is what people should look at and see how hard it is to swap old school engines to modern HP makers. Tyler is covering every base and thinking into the future and doubling down on the making a great car that can be driven everyday and raced on the weekend. Great video. Five stars⭐⭐⭐ ⭐⭐
Tremendous video my friend! I’m LS swapping a 67 Camaro with same exact mount kit. I love it and will use it again and again! Thanks for the video!
Did I miss it? But I didn’t see the link for the power steering hoses. I like how you kept stock as possible.
Pretty good so far. Question, whats the price range for a LS1 engine and trans?
Great content! What front suspension did you use? Control arms and bushings?
With the 370 gears what rpm you running on interstate? I thought about going 391
Do you have any pictures of video on how you mounted the fans and radiator to car?
What did you do with the 4 speed you had on the camaro
How much was the total swap cost?
What headers did you use
Good video as usual.
Been following your build have a question did the oil pan Holley 302-3 Fit with no issues. And did you have any trouble With the fitment of the transmission in the tunnel
Yeah the pan fits great and has a ton of ground clearance. No issues with the tunnel, just the new hole for the shifter.
@@ClassicOctane Thanks for the info I'm building a 69 as well with a GTO set up Look forward to some more videos. Thanks
Your one of the few people that I know of that can work on both cars and bikes that’s actually good at both
Thanks!
@@ClassicOctane should of put in a 427 smallblock ls=trash
Who disliked the video 😒
Rich Yung there’s always a troll in the crowd.
What oil pan did you use
Holley 302-3
Do you plan on air conditioning sir... southern comfort
I do but will probably wait to figure that out in the spring. Out of the budget currently.