Hello 👋 One question please . On the right rear stop light connector ,did you connect the red cable to pin 2 and black cable to pin 3 ( ground )? Also is this for the medianav the original ? Thank you 🙏
Hi, Yes, this is the original MediaNAV and this is the official installation method for the original supplied rear view camera. Actually there were two MediaNAV models for this Duster model (H79): - The older one and the installation is made as shown in this video: Red to pin 2 and black to ground; - And the MediaNAV Evolution that require a different set of connections where all the Camera wires are connected to the MediaNAV and ONLY if the unit is not supplied with reverse signal, a connection is made between that pin 2 from the rear right connector and the MediaNAV. Also this type require a 6V camera. You can identify your MediaNAV type as follow: Engage the reverse gear --> the display switches to the rear camera --> get the reverse off --> if the MediaNAV is displaying the rear camera for the additional 7 seconds after the reverse gear was switched off, you got the MediaNAV Evolution.
Hello 👋 Can you please tell me on the reverse pin 2 and 3 what colors are the cables .? I have the same model and medianav version and only want to know what colors are the cables on the reverse pin 2 and 3 so I can connect my cables (red and black coming from my camera ) ? Thanks a lot
At Dacia, the colors can vary from one batch to another, that's why it's best to check them yourself. Remove the connector, and you will see that their numbering is written right on the connector. Good luck!
+Patel Hetal After camera installation is necessary to activate it via CLIP service tool at Dacia dealership. For the full procedure please check the Logan installation procedure from minute 8:20: th-cam.com/video/GXQy0otObi8/w-d-xo.html Thanks
merci pour tts les explications bravo bonne continuation je serais très reconnaissant si tu nous parle et tu compare dacia duster dci 4x2 et dacia duster dci 4x4 et merci encore une autre fois .
+chejjar hamid Thank you for your appreciations :). I do not do ( just yet) such a review, but in the future, you never know :)). For now, beside other things, we design and install accessories for Dacia and Renault. Thanks.
Hi. There's Reverse on pin 2 and Ground on pin 3 from right rear stop light connector. But be careful! If you have MediaNAV Evolution on your car, the image will stay ON for another 6 or 7 seconds AFTER you disengage the reverse gear. That will generate a black screen for that period of time with a reverse camera error message: "Rear View camera damaged or not present." For that case you will need the following camera, Dacia reference: 8201675481. Cheers!
With an aftermarket camera you will have the following situation: - Reverse ON --> the MediaNAV will switch to reverse camera - all good! - Reverse OFF --> camera shuts off, but on the MediaNAV will be displayed for 6-7 seconds a black image with the error I've told you about - not so good. - After that period of time the MediaNAV will display the media screen you had previous switching the reverse ON. The OEM camera will stay ON for the entire time that MediaNAV will have the image switched to reverse camera. Yes it is the only camera that solve this problem.
@@OvidiuCuiesdean thanks for another reply. Appreciate. On friday i will be install aftermarket camera and special cable adapter for my Duster 2014 and Medianav Evolution (unlocked 9.1.3 ). But still belive will not by this issue u talking about :) Greetings from Poland.
what is that connector pinout and what did you change whick wires? is the camera simple 12V cam having analog video out? I might use my own cams here I have, also navi already handles analog video signal in? just needs an other SF and CAN interface to turn it on?
Salut, operațiunea durează ciirca o ora jumătate, doua si poate fi făcută la orice reprezentanta, / service Dacia. Dacă nu reusesti, da-mi de știre si putem face o programare la unul dim sediile noastre din București, Brașov, Cluj, Timișoara sau Iași.
Ovidiu Cuiesdean salut. Mai mult ca sigur o sa vreau o programare la timisoara, in functie de pret.cat costa cu camera voastra, si cat costa cu a mea,poti sa-mi zici?poti sa imi spui si un total daca mai adaugam si hartile de europa actualizate? Mersi fain
Din păcate nu știu nimic de prețuri. Te rog ia legătura cu colegii mei de acolo si te vor lămuri ei: Falcon Showroom TIMISOARA Adresa: B-dul Calea Dorobantilor, nr. 63, (in incinta Service Dinamo), Timisoara Tel: 0256.274.788 / 0726.141.668 Fax: 0256.274.789 Email: office.timisoara@falcon.ro Program de lucru cu clientii: Luni - Vineri: 08:00-17:00 Sambata - Duminica: INCHIS
bonjour je souhaiterais installer une camera de recul, je l ai comandée. je souhaiterais faut il rajouter 2 cables supplementaires pour alimentation de l autoradio avec ecran et ensuite un autre cable se piquant sur la marche arriere. je voulais vous dire que j ai aussi un radar de recul cordialement phil
Hi Philipe, I do not understand french but I will rely o google translate :))). There is two different cameras for this car: 8201575710 it is a 12V camera (first revision) and 8201675481 which it is a 6V camera that fits to Medianav Evolution. Please be very careful which one you have because it got different install guides. You should be able to find those install guides on www.tech-accessoires.renault.com/ Cheers!
Hello Thank you for sharing this tutorial. I would like to ask you something for the rear camera. I have bouht the following kit www.daciamag.com/dacia-duster-ii-2018-rear-view-camera-original-8201714222.html My car had no rear camera. When I removed the Medianav and I checked the connector on the back I saw that the cable for the camera was already pre- installed but I could not find the path of the cable. Can you help me and tell me where is the other of this cable is terminated? Best regards George
Hi, Actually the wires stops somewhere in a connector down in the left B pillar. But, you have to know, that the correct installation in to remove the oem camera pins from MediaNav connector and to insert the ones supplied with the Camera. Please check the installation guide here: www.tech-accessoires.renault.com/download_doc/?document_id=5527. Cheers! Ovidiu
I have to say, when I do this by myself, in my head there is this disco playing. thank you for sharing!
Nice to know that I gave you some inspiration :)).
Cheers!
Felicitări pentru aceasta prezentare pentru becuri climatizare aveti filmat multumesc. Succes
Multumesc de aprecieri. Nu, nu avem o astfel de filmare. Bafta!
What tool did you used for opening the two screws at 00:28 min
Hello 👋
One question please
. On the right rear stop light connector ,did you connect the red cable to pin 2 and black cable to pin 3 ( ground )?
Also is this for the medianav the original ?
Thank you 🙏
Hi,
Yes, this is the original MediaNAV and this is the official installation method for the original supplied rear view camera.
Actually there were two MediaNAV models for this Duster model (H79):
- The older one and the installation is made as shown in this video: Red to pin 2 and black to ground;
- And the MediaNAV Evolution that require a different set of connections where all the Camera wires are connected to the MediaNAV and ONLY if the unit is not supplied with reverse signal, a connection is made between that pin 2 from the rear right connector and the MediaNAV. Also this type require a 6V camera.
You can identify your MediaNAV type as follow:
Engage the reverse gear --> the display switches to the rear camera --> get the reverse off --> if the MediaNAV is displaying the rear camera for the additional 7 seconds after the reverse gear was switched off, you got the MediaNAV Evolution.
@@OvidiuCuiesdean perfect thank you so much for your help .Its the original medianav not the evolution .Wish you the best
What multimedia would you recommend? I don't have any in my Duster, so if I was to mount a rear camera, I would also need to get multimedia first.
A dedicated one would be recommended, but do not choose a cheap one :).
can the cabels go on the right side of car? (2015 Duster)
Hello 👋
Can you please tell me on the reverse pin 2 and 3 what colors are the cables .?
I have the same model and medianav version and only want to know what colors are the cables on the reverse pin 2 and 3 so I can connect my cables (red and black coming from my camera ) ?
Thanks a lot
At Dacia, the colors can vary from one batch to another, that's why it's best to check them yourself. Remove the connector, and you will see that their numbering is written right on the connector. Good luck!
Thanks a lot ❤🙏
and what this operation you did with your computer , plz.
Very nice n clean job
Thanks!
what do u do last thing after making switch on?I have tried in my duster but it skin doesn't Change its mode by revese gear.I have mediaskin
+Patel Hetal
After camera installation is necessary to activate it via CLIP service tool at Dacia dealership.
For the full procedure please check the Logan installation procedure from minute 8:20:
th-cam.com/video/GXQy0otObi8/w-d-xo.html
Thanks
merci pour tts les explications bravo bonne continuation je serais très reconnaissant si tu nous parle et tu compare dacia duster dci 4x2 et dacia duster dci 4x4 et merci encore une autre fois .
+chejjar hamid
Thank you for your appreciations :).
I do not do ( just yet) such a review, but in the future, you never know :)).
For now, beside other things, we design and install accessories for Dacia and Renault.
Thanks.
merci comme même.vous êtes un prof ....
A qué color de cable se conecta el rojo?
Could be different color. Connect to Pin 2. Please see the install guide.
Hello m8. Can u tell me what cables colors in rear lamp is + and - to connect power to camera and rev signal to medianav. Thanks
Hi. There's Reverse on pin 2 and Ground on pin 3 from right rear stop light connector.
But be careful! If you have MediaNAV Evolution on your car, the image will stay ON for another 6 or 7 seconds AFTER you disengage the reverse gear. That will generate a black screen for that period of time with a reverse camera error message: "Rear View camera damaged or not present." For that case you will need the following camera, Dacia reference: 8201675481.
Cheers!
@@OvidiuCuiesdean tanks for reply. But afer this period 6-7 second everything back to normal? Original camera is the ony one to solve this problem?
With an aftermarket camera you will have the following situation:
- Reverse ON --> the MediaNAV will switch to reverse camera - all good!
- Reverse OFF --> camera shuts off, but on the MediaNAV will be displayed for 6-7 seconds a black image with the error I've told you about - not so good.
- After that period of time the MediaNAV will display the media screen you had previous switching the reverse ON.
The OEM camera will stay ON for the entire time that MediaNAV will have the image switched to reverse camera. Yes it is the only camera that solve this problem.
@@OvidiuCuiesdean thanks for another reply. Appreciate. On friday i will be install aftermarket camera and special cable adapter for my Duster 2014 and Medianav Evolution (unlocked 9.1.3 ). But still belive will not by this issue u talking about :) Greetings from Poland.
Let me know how it worked.
Cheers!
Very nice video but I didnt really get what You did with black and red cable at 7:29. How and where did You connect them?
Thank You in advance
There's the camera power connections from the reverse light bulb. Please check the install guide from www.tech-accessoires.renault.com/.
@@OvidiuCuiesdeandyff /
😅
what is that connector pinout and what did you change whick wires? is the camera simple 12V cam having analog video out? I might use my own cams here I have, also navi already handles analog video signal in? just needs an other SF and CAN interface to turn it on?
where did you bought this camera, I am very intressed
+Luc d
You can buy this camera from any Dacia/ Renault dealership. The camera is an OEM product.
But dacia say this cannot be bought from them it has to be factory fitted
What is the part number for the camera?
Reference number: 8201575710
@@OvidiuCuiesdean Thanks for taking the time to reply. Is this purchased from Renault/Dacia or some other supplier?
This product got a Dacia reference number and is available only at Dacia/ Renault dealership.
qu'elle est options pour activé la caméra de recule dans le système de médiat nav évolution version 6.3 et comment faire le scanner de médiat nav ?
+rawfi saida
Unfortunately there are some details I do not know. You have to go to Dacia dealership for this operation.
Cheers!
Hi, where you can download the software to configure the camera ?
Hi,
There's a Dacia service tool: CLIP that you must use for camera activation.
Cheers!
Bonjour.
Où on trouve ce camera?
Merci.
Hi there!
This camera can be found on any Dacia dealership/ service. Use reference number: 8201575710.
Cheers!
Salut, din ce oras esti? Cat ma costa operatiunea daca am deja camera cumparata, si cam cat dureaza? Ai si hartile noi pentru Europa? Mersi fain
Salut, operațiunea durează ciirca o ora jumătate, doua si poate fi făcută la orice reprezentanta,
/ service Dacia. Dacă nu reusesti, da-mi de știre si putem face o programare la unul dim sediile noastre din București, Brașov, Cluj, Timișoara sau Iași.
Ovidiu Cuiesdean salut. Mai mult ca sigur o sa vreau o programare la timisoara, in functie de pret.cat costa cu camera voastra, si cat costa cu a mea,poti sa-mi zici?poti sa imi spui si un total daca mai adaugam si hartile de europa actualizate? Mersi fain
Din păcate nu știu nimic de prețuri. Te rog ia legătura cu colegii mei de acolo si te vor lămuri ei:
Falcon Showroom TIMISOARA
Adresa: B-dul Calea Dorobantilor, nr. 63, (in incinta Service Dinamo), Timisoara
Tel: 0256.274.788 / 0726.141.668
Fax: 0256.274.789
Email: office.timisoara@falcon.ro
Program de lucru cu clientii:
Luni - Vineri: 08:00-17:00
Sambata - Duminica: INCHIS
Camea prezentată in acest video se comercializează numai prin rețeaua Dacia.
thanks, it´s perfect
Thank you. Enjoy!
i just jammed mine out under the rear light group. no drilling just bodging :)
Hmm... it should be installed only in the way described by the official install guide.
bonjour
je souhaiterais installer une camera de recul, je l ai comandée.
je souhaiterais faut il rajouter 2 cables supplementaires pour alimentation de l autoradio avec ecran et ensuite un autre cable se piquant sur la marche arriere.
je voulais vous dire que j ai aussi un radar de recul
cordialement
phil
Hi Philipe,
I do not understand french but I will rely o google translate :))).
There is two different cameras for this car:
8201575710 it is a 12V camera (first revision) and
8201675481 which it is a 6V camera that fits to Medianav Evolution.
Please be very careful which one you have because it got different install guides.
You should be able to find those install guides on www.tech-accessoires.renault.com/
Cheers!
Comment monter caméra de recul media nav évolution 6.0.3
Hi there! You will need the 8201675481 reference rear view camera.
Cheers!
commen Activer caméra de recul sur Medianav evolusion 6.3
+rawfi saida
Pretty much like the old one. Please check this video from 8:30:
th-cam.com/video/VXBT7N49UDM/w-d-xo.html
Cheers!
Hello
Thank you for sharing this tutorial.
I would like to ask you something for the rear camera.
I have bouht the following kit www.daciamag.com/dacia-duster-ii-2018-rear-view-camera-original-8201714222.html
My car had no rear camera. When I removed the Medianav and I checked the connector on the back I saw that the cable for the camera was already pre- installed but I could not find the path of the cable. Can you help me and tell me where is the other of this cable is terminated?
Best regards
George
Hi, Actually the wires stops somewhere in a connector down in the left B pillar.
But, you have to know, that the correct installation in to remove the oem camera pins from MediaNav connector and to insert the ones supplied with the Camera.
Please check the installation guide here: www.tech-accessoires.renault.com/download_doc/?document_id=5527.
Cheers!
Ovidiu
Nice video
Thanks!