I did mine 4 years ago Looks like the same kit you used. Well, Last summer mine quit, the linkage came off at the electric motor. So, I pulled the Glove box, then the center dash, then one gauge. Still couldn't fix it, I guess now, I will drop the entire set up out, and guess on the alignment, But you did a great job documenting this, good video.
I hate that happened! I’m almost certain the owner of the truck that I installed it in has never even used his wipers. Thanks for sharing your experience because I’m sure it’ll help someone that may be on the fence when choosing to replace their vacuum with the electric kit!
I am having the same issue, I see there s some Allen head set screws , hopefully I can tighten them up without taking everything out . Thanks for your video, now I know what I’m looking at
The clocking is critical for proper parking position. Yes there’s an Allen screw that’s allows adjustment. What sucks is the fact it all has to be assembled in the truck before you can check it for correct position
Great video tutorial. I was about to convert on my 58 Bel Air, then I saw a video about running mystery oil through the vacuum line, and I'll be it worked wipers work great again.
definitely will have to learn more about that... I did like the speed Gil got when he turned them on high. Where did Chevy pull the vacuum from ? In 56, cadillac pulled it from the oil pump. FYI
thanks for the video. you have a cool truck. I bought the same wiper conversion. Hope it turns out as good as yours did. Great tip on the washer to take up the slack.
Thanks for this install vid, I have a ‘49 has this kit already installed by the PO, but Is missing the white spacers. I knew it wasn’t right, but didn’t know what it was missing to take that slop out.
Liking the double din head unit layout! And the a/c outlets too. Thanks for showing the installation of the arms where you added the washers. Been thinking about getting a new electrical wiper kit for my 55.
This GR Auto Gallery is the Best!!! I just subscribed, I've taken all their advice and starting collecting chevys too. I just uploaded a new video with similar content on my channel. PLZ watch/subscribe and gimme me some feedback/love ! Thank you !
Great video, bro! I'm doing the same conversion on my '59. By watching your video, I think I've diagnosed the problem with mine. Thank you, liked and subscribed. Beautiful truck!
Thanks great video question did the transmission arm for the passenger wiper clear the cowel mechanism , I’m having a problem with it not clearing it. Would appreciate some feed back thanks Nick
th-cam.com/video/j0in2XvX5iQ/w-d-xo.html Maybe try switching the transmission arms where they are connected to the drive. That would cause interference if the one on top should be on bottom.
@@gillrodshop Good Point you may be right I never thought of it , tough to work on it through the speaker opening .... Thanks I will let you know how I make out, Did you finish your car yet?
@@nickguagliardo8996 yes, I did everything except painting it and the owner drove it home last week. I’ll publish more videos of the final work in the next few weeks.
I removed the choke cable because I’m using an LS based power plant. Let me know if you need any pictures from behind the dash while I have access. Thanks
Counterpart is the store brand that The Truck Shop sells. 6 volt part no. 47-047011 and 47-04701 is the 12 volt part number. Website: www.truckandcarshop.com/
Thanks for watching and commenting. Click the link to see behind the dash view of the motor operating. Hope this is helpful! th-cam.com/video/j0in2XvX5iQ/w-d-xo.html
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
I did mine 4 years ago Looks like the same kit you used. Well, Last summer mine quit, the linkage came off at the electric motor. So, I pulled the Glove box, then the center dash, then one gauge. Still couldn't fix it, I guess now, I will drop the entire set up out, and guess on the alignment, But you did a great job documenting this, good video.
I hate that happened! I’m almost certain the owner of the truck that I installed it in has never even used his wipers. Thanks for sharing your experience because I’m sure it’ll help someone that may be on the fence when choosing to replace their vacuum with the electric kit!
I am having the same issue, I see there s some Allen head set screws , hopefully I can tighten them up without taking everything out . Thanks for your video, now I know what I’m looking at
The clocking is critical for proper parking position. Yes there’s an Allen screw that’s allows adjustment. What sucks is the fact it all has to be assembled in the truck before you can check it for correct position
Great video tutorial. I was about to convert on my 58 Bel Air, then I saw a video about running mystery oil through the vacuum line, and I'll be it worked wipers work great again.
Great idea! Thanks for sharing!
definitely will have to learn more about that... I did like the speed Gil got when he turned them on high. Where did Chevy pull the vacuum from ? In 56, cadillac pulled it from the oil pump. FYI
@@DanTheManIOM I remember it being pulled from the intake manifold on the cars. Good question though!
I like how you explain the install. I also like your ingenuity. Like when you added the washer ! Nicely done.
I’m glad you like the video. Thanks for watching and commenting!
Thanks for this video , I'm about to do this on my 1950 GMC . The wipers look to work way better than the vacuum setup.
You’re welcome, thank you for watching! Yes, they are more consistent than the vacuum setup.
thanks for the video. you have a cool truck. I bought the same wiper conversion. Hope it turns out as good as yours did. Great tip on the washer to take up the slack.
Thanks!
Thanks for this install vid, I have a ‘49 has this kit already installed by the PO, but Is missing the white spacers. I knew it wasn’t right, but didn’t know what it was missing to take that slop out.
You’re welcome.
Really appreciate you walking thru this... my 12V motor just arrived and I am doing a little research before installing. Thanks Gill!
You’re very welcome! Thanks for watching and commenting!
Did you get it from lmc trucks?
Great video. Changing wiper motor now
Thank you!
Liking the double din head unit layout! And the a/c outlets too. Thanks for showing the installation of the arms where you added the washers. Been thinking about getting a new electrical wiper kit for my 55.
Sonny Surles thanks 😊
This GR Auto Gallery is the Best!!! I just subscribed, I've taken all their advice and starting collecting chevys too. I just uploaded
a new video with similar content on my channel. PLZ watch/subscribe and gimme me some feedback/love ! Thank you !
Really nice presentation!
Thank you!
Very informative and well shot thanks. Keep up the good work my man 👍👍👍
Thanks Wayne! 😊
Nice video brother. This will help be building the beast.👍👍
Thanks, I’m glad it’ll help!
Thanks for the good/well explained video hope to see more
Thanks for watching and commenting!
Looks like a nice conversion kit,..can you advise of the name of it, and the catalog number?
Thanks for the great presentation.
The kit is manufactured by Counterpart for 6 volt and 12 volt systems and sold by the Truck Shop ph. 704-979-6490. Thanks!
your video really helped me. thank you.
I’m glad it did! Thank you for watching and giving feedback!
Very interesting !!!!!!! With your explanation, I think I could do it. This model truck is being more sought after.
Thanks!
Great video! Thanks for making this.
Thank you!
Where did you purchase this motor assembly? Part number please. Thank you for this very informative video.
The Truck and Car Shop
(704) 979-6490
You are welcome. Thanks for watching!
issuu.com/truckandcarshop/docs/ts_47-59_13_web
Great video, bro! I'm doing the same conversion on my '59. By watching your video, I think I've diagnosed the problem with mine. Thank you, liked and subscribed. Beautiful truck!
Andrew Pierson thanks for watching!
Excellent video was looking for something like this. subscribed to your channel
Great, thanks!
grate vid... where did you get the kit ? thanks man!
The Truck and Car Shop in Concord, NC 🇺🇸 ph. 704-979-6490
Thank you for the information. I see you are modifying your gauges. Sure would like to see it. I have a 54. My gage's are crap
You’re welcome! I have the gauges installed and I’ll publish a video soon so keep an eye 👁 out for that! Thanks for watching and commenting.
great video brother very informative and explanatory thanks I am doing my 57 chevy
Thanks for watching and commenting.
What's the actual name of the hood scoop thing that sticks up? Please and thanks for any help.
Top cowl air vent.
can't wait thanks
Thanks great video question did the transmission arm for the passenger wiper clear the cowel mechanism , I’m having a problem with it not clearing it. Would appreciate some feed back thanks Nick
Yes, it cleared it and I can’t remember having any issues.
th-cam.com/video/j0in2XvX5iQ/w-d-xo.html
Maybe try switching the transmission arms where they are connected to the drive. That would cause interference if the one on top should be on bottom.
@@gillrodshop Good Point you may be right I never thought of it , tough to work on it through the speaker opening .... Thanks I will let you know how I make out, Did you finish your car yet?
@@nickguagliardo8996 yes, I did everything except painting it and the owner drove it home last week. I’ll publish more videos of the final work in the next few weeks.
I have a Question where did you get your wiper motor kit for your truck
The Truck and Car Shop. www.truckandcarshop.com/
www.truckandcarshop.com/
Thank you for the video Gill. Did the new wiper motor clear the choke cable? I will be using your comments for my 1951 Chevy 3600.
I removed the choke cable because I’m using an LS based power plant. Let me know if you need any pictures from behind the dash while I have access. Thanks
Pics would be great. Thanks Gill.
th-cam.com/video/6Ib5YO_DuQU/w-d-xo.html
Perfect. Thanks for your help.
What brand kit did you get?
Counterpart is the store brand that The Truck Shop sells. 6 volt part no. 47-047011 and 47-04701 is the 12 volt part number. Website: www.truckandcarshop.com/
@@gillrodshop , Thank you sir.
I broke the part that the wiper arm attaches to. Do you know where I could buy another?
They may be able to help you. Use this link…
www.truckandcarshop.com/
@@gillrodshop Thank you sir. The part I was looking for was the linkage.
@@ARC51bowtie you’re welcome
Great video ! Thanx buddy !
Thanks for watching!
Hi great job .can you show the rotation under the dash I can't wout out how it works
Thanks for watching and commenting. Click the link to see behind the dash view of the motor operating. Hope this is helpful! th-cam.com/video/j0in2XvX5iQ/w-d-xo.html
My next upgrade
Thanks. This helps a bunch.
Thanks for watching and commenting!
You explained it well thank u
Thanks for watching and commenting!
thanks, great video !
Thanks for watching and commenting!
Thanks guy. You explained alot idk. Thx!!!
Thanks for watching and commenting!
Good video
My next upgrade