Great video! This vid brings to light a lesson I learned the hard way.; remove the filler plug before the drain plug. If you remove the drain and can't get the filler out, you're screwed!
As usual Peter, you do such first class thorough inspection and work. We definitely learn all the important things from you to care for our Toyota's so we have great reliability and longevity. 🚙😁
Another great video, Peter! I have a ‘99 Tacoma 4WD and have rebuilt the entire suspension front to back and replaced the fluids in the front and rear diffs and transfer case. And I didn’t even know there was a rear diff vent until now!!! Headed out to the garage to check it now. Thank you! Keep them coming. I learn something new every time I watch one of your videos. Update: Yep, it was stuck. Those breather caps are soft metal. If you use more than a metal brush and your hand, go easy on it, they break free pretty easily.
ALL those fluids need to go - NOW! Your analysis is very thorough and quite correct, in my opinion. It is a joy to watch you work - you are always so cheerful and also have a great sense of humor. Looking forward to more videos on this truck, hopefully.
Thanks for that reminder! My 2003 Tacoma has 191,000 miles on it and I did change the rear diff oil (2wd) about a 100,000 miles ago but never checked the vent. My truck is a daily driver on the streets.
Thank you for this video. I changed the rear diff oil two weeks ago. And have been seeing people talking about the breathing vent. So I took mine off and there was a poof when I unscrewed it telling me there was pressure in there. I ordered one and it’s coming. But I worked the old one over and got it cleaned up and free working so I put it back till my new one comes in. Once again thank you. Your videos are top notch.
Very interesting vlog Peter I never knew about a vent/breather valve I have a Nissan nv200 and you have given me the confidence in renewing my transmission oil after watching your vlogs many thanks and take care regards Mark from billericay in the Uk 🇬🇧👍👍
you are inspiring, I always use to let the circumstances take over and have a dirty work area. My retort was this is construction, but you have inspired me to go in a new direction. you work on dirty cars, yet you maintain a clean work area. Thank you sir for changing my point of view!!
Laughs in 3rd gen 4runner in the northeast. That's not rust by a long shot. We have been conditioned to spray penetrating oil on anything at least 24 hrs before working on it.
Peter, you are a sauerkraut eating super-hero ..... I wish you were close so I could entrust you to service my Tundra .... keep up the honest work and thanks for the videos ....
2004 Tacoma zero maintenance, not a spot of rust on it. Here in Michigan they only look like this until their first January if you don't undercoat them and profusely monitor them.
@@jimknowlton342 As a Canadian, I am absolutely confounded by the fact most people do NOTHING to prevent their vehicle from rusting despite the fact our roads are salted 4-5 months per year. Back in 2005 my car was built in the same factory as this Tacoma . It just got its 16th annual Krown application and has no rust. Refusing to rustproof in the international Salt Belt is as destructive as refusing to change the oil.
@@jimknowlton342 I hate to steal your thunder, but Michigan is not the only place to have the honor of ruining the underbodies of motor vehicles. Personally, I would be quite content not seeing snow again for the rest of my life.)
Update: Checked my vent valve and it was stuck closed with just minimal dirt on it! Replaced the gear oil and what a difference! At first I thought my tires were low on air but they where right at the correct pressure. The drive is much smoother!
Wouldn’t it be wise to completely remove the vent to be sure it isn’t plugged internally? Vent for front dif’ is harder to find; might be good if you could show us how to find it.
I just changed the transfer case and rear diff fluid in my 2012 rav4 with synthetic 75W-90 and I am getting a smell of burning gear oil inside the cabin after the vehicle heats up, but not outside of it. I rechecked the level and it seemed low and I added more oil until it began running out. Ran the vehicle again and I still get the smell inside the car, but not as strong as before. Any suggestions for getting rid of this smell would be greatly appreciated. Love your videos.
This video gave me nightmares. I went and replaced both diff vents on my 2020 4Runner w/13,000 miles. Then to be extra safe, I relocated both to the top of my CB antennae.
My tocoma will go into 4 wheel drive but to take it out I have to shut the truck off turn the switch off then whenI turn it back on it disengages, any idea what it could be?
I've gone through 3-4 axle seals in 2 years on my 2000 4runner. I have not checked the dif breather. i bet it's stuck and causing pressure on my seals. I'm gonna check it tomorrow morning. I currently have a axle seal leak, yet again.
Many, many people don't do any maintenance on any car or truck, "it's running, why would I need to do anything?" Or "it will be too much money!" Or "I need my truck I can't have it tied up in a shop" there's a long list of excuses, and many times it's just ignorance. Most cars and trucks rarely get anything more than gas in the tank and a quart of oil when the oil light comes on.
My dad drives an 04 sierra with the 5.3L V8. He changes the oil every 3000 miles and... That's where the maintenance starts and stops. It has 180k miles and a lifter tick, battery drain, rust everywhere and anywhere, nuked suspension, bald tires, and no brakes. That's not how that poor truck was when he bought it 100k miles ago.
YES! I have a lexus GS sedan, which is a Sedan with Toyota truck parts, and my front rear breather was clogged, I had a leak from a seal. I cleaned it and it stopped.
Just get the money meter running. Cleaning, disposal, toad testing, etc are all in the clock. No book labor estimating on this. Ps. What sauerkraut is your choice?
Why not use an impact wrench instead of a breaker bar to avoid the risk of swaying on the hydraulic lift? Please keep making more Tacoma vids. Thank you!
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
You sir are a mechanic, most are not. Wish you were near by.
The Society For The Prevention of Cruelty to Tacomas has been alerted in regard to this 'person's' abusive actions.
@@tj4034 I'll take it and give it the kind of care it deserves.
When he sells it hell only take $5k because TACOMA
Great video!
This vid brings to light a lesson I learned the hard way.; remove the filler plug before the drain plug.
If you remove the drain and can't get the filler out, you're screwed!
When the socket almost fell down the funnel into the oil recovery reservoir, hahaha. Good reflexes, Peter!
I usually see workshops having a wire mesh guarding the funnel into the oil drain tank. So no risk of any objects falling in...
As usual Peter, you do such first class thorough inspection and work. We definitely learn all the important things from you to care for our Toyota's so we have great reliability and longevity. 🚙😁
Another great video, Peter! I have a ‘99 Tacoma 4WD and have rebuilt the entire suspension front to back and replaced the fluids in the front and rear diffs and transfer case. And I didn’t even know there was a rear diff vent until now!!! Headed out to the garage to check it now. Thank you! Keep them coming. I learn something new every time I watch one of your videos.
Update: Yep, it was stuck. Those breather caps are soft metal. If you use more than a metal brush and your hand, go easy on it, they break free pretty easily.
I would recommend all 4WD owners to get a power washer. Cleanup after off-roading is a critical maintenance step. 😲
ALL those fluids need to go - NOW! Your analysis is very thorough and quite correct, in my opinion. It is a joy to watch you work - you are always so cheerful and also have a great sense of humor. Looking forward to more videos on this truck, hopefully.
Truly a honest mechanic , love to watch your videos
Thanks for that reminder! My 2003 Tacoma has 191,000 miles on it and I did change the rear diff oil (2wd) about a 100,000 miles ago but never checked the vent. My truck is a daily driver on the streets.
I extended my rear diff breather to the left rear taillight compartment. Really enjoy your videos!
Bombero33 ran mine to the gas cap compartment. Blew a diff seal cause the breather was kaput.
Good idea
70Marc That’s was my first choice, but opted for the tail light. Either one gets the breather out of the water. Take care!
You saved my Toyota Tacoma
I was pushing fluid out my rear axle vent was completely shut
Two weeks now no more fluid !
Thank you sir 👍😃
I get satisfaction from watching fluid changes. Thanks for keeping the “blooper” if you dropping the socket too. Keep up the great work!
Thank you for this video. I changed the rear diff oil two weeks ago. And have been seeing people talking about the breathing vent. So I took mine off and there was a poof when I unscrewed it telling me there was pressure in there. I ordered one and it’s coming. But I worked the old one over and got it cleaned up and free working so I put it back till my new one comes in. Once again thank you. Your videos are top notch.
Very interesting vlog Peter I never knew about a vent/breather valve I have a Nissan nv200 and you have given me the confidence in renewing my transmission oil after watching your vlogs many thanks and take care regards Mark from billericay in the Uk 🇬🇧👍👍
Some people get the notion that Toyota's are so reliable you don't have to do maintenance.
This man is truely a rare breed of mechanic. Great video.
you are inspiring, I always use to let the circumstances take over and have a dirty work area. My retort was this is construction, but you have inspired me to go in a new direction. you work on dirty cars, yet you maintain a clean work area. Thank you sir for changing my point of view!!
Great job, Peter. Wish you were in Ontario! Cheers my friend.🇨🇦🇺🇸
Laughs in 3rd gen 4runner in the northeast. That's not rust by a long shot. We have been conditioned to spray penetrating oil on anything at least 24 hrs before working on it.
Your videos are always amazing.
When peter is on the job it's done rite and properly another great maintenance wish peter was closer I'm in canada
Peter, you are a sauerkraut eating super-hero ..... I wish you were close so I could entrust you to service my Tundra .... keep up the honest work and thanks for the videos ....
2004 Tacoma zero maintenance, not a spot of rust on it. Here in Michigan they only look like this until their first January if you don't undercoat them and profusely monitor them.
An annual visit to Krown Rustproofing will do the trick.
@@rightlanehog3151 not the point but you are right
@@jimknowlton342 As a Canadian, I am absolutely confounded by the fact most people do NOTHING to prevent their vehicle from rusting despite the fact our roads are salted 4-5 months per year. Back in 2005 my car was built in the same factory as this Tacoma . It just got its 16th annual Krown application and has no rust. Refusing to rustproof in the international Salt Belt is as destructive as refusing to change the oil.
@@jimknowlton342 I hate to steal your thunder, but Michigan is not the only place to have the honor of ruining the underbodies of motor vehicles. Personally, I would be quite content not seeing snow again for the rest of my life.)
Indiana is just as bad!
Great video as always!
Your detailed in explaining what you're doing,, thank you sir
Update: Checked my vent valve and it was stuck closed with just minimal dirt on it! Replaced the gear oil and what a difference! At first I thought my tires were low on air but they where right at the correct pressure. The drive is much smoother!
"Now I have it in my mouth" LOL
Thanks for sharing this video. Interesting video.
Thank you for your content. It is fantastic.
Really nice content and explanation. Thanks!
I like the Forester grille on the wall. I have a Forester myself
Love Your channel!! I have ‘20 Tacoma TRD off-road, I was wondering what kind of grease do You suggest to use on the “propeller joint”? Thank You!
Like your content ... Keep up the good work
True that you don’t see Tacoma neglected this badly…what a shame
Wouldn’t it be wise to completely remove the vent to be sure it isn’t plugged internally?
Vent for front dif’ is harder to find; might be good if you could show us how to find it.
I agree with you these vents do block internally he has done nothing to make sure the vent is clear
Thank you! I will check 2008 Taco.
if ever something was begging to be blasted with brake clean, it was that diff breather! thanks for the video!
You seldom see a Taco in a SMA video.
That's because all Toyota's usually ever need are fluid changes and brake jobs!
Yes, that’s why I bought a Tacoma.
Thank you!
You're a good man.
I just changed the transfer case and rear diff fluid in my 2012 rav4 with synthetic 75W-90 and I am getting a smell of burning gear oil inside the cabin after the vehicle heats up, but not outside of it. I rechecked the level and it seemed low and I added more oil until it began running out. Ran the vehicle again and I still get the smell inside the car, but not as strong as before. Any suggestions for getting rid of this smell would be greatly appreciated. Love your videos.
TACO/4runner rear diff police thank you for saving this truck :)
Thanks for an excellent video. So did the owner agree to change all the fluids?
I got a question. My 2005 Toyota Sequoia goes up and down in rpm. Specially in the mornings. Thank you.
Great channel
This video gave me nightmares. I went and replaced both diff vents on my 2020 4Runner w/13,000 miles. Then to be extra safe, I relocated both to the top of my CB antennae.
I see ur in California. I have a first gen taco and wondering if youre in the LA area?
A new Toyota breather is very inexpensive... just replaced mine. good insurance.
should just buy 20 of them at a time.
My tocoma will go into 4 wheel drive but to take it out I have to shut the truck off turn the switch off then whenI turn it back on it disengages, any idea what it could be?
I have the same issue 2.7 regular cab 4x4 4h not working only 4l working is there any help you can give me ? Or maybe a video?
Great vid. Thanks for posting.
Need to take my truck to you for service. Where's your shop?
Does anyone know where his shop is located in Ca? I imagine northern Cali?
I've gone through 3-4 axle seals in 2 years on my 2000 4runner. I have not checked the dif breather. i bet it's stuck and causing pressure on my seals. I'm gonna check it tomorrow morning. I currently have a axle seal leak, yet again.
Fantastic!
Keep that accent!
Keep that work ethic!
What kind of wild animal would not perform maintenance!
Many, many people don't do any maintenance on any car or truck, "it's running, why would I need to do anything?" Or "it will be too much money!" Or "I need my truck I can't have it tied up in a shop" there's a long list of excuses, and many times it's just ignorance. Most cars and trucks rarely get anything more than gas in the tank and a quart of oil when the oil light comes on.
you will be surprised...they walk amongst us and drive mainly riggidy national brands
My dad drives an 04 sierra with the 5.3L V8. He changes the oil every 3000 miles and... That's where the maintenance starts and stops. It has 180k miles and a lifter tick, battery drain, rust everywhere and anywhere, nuked suspension, bald tires, and no brakes.
That's not how that poor truck was when he bought it 100k miles ago.
There are cities full of creatures that just drive, never do maintenance. That's what the little engine light is for!
THANX
Amazing truck. Tacoma just keep running
Why not change the vent valve?
Where is your shop located?
Super lack of maintenance. So sad
I plan on moving my rear diff vent behind the brake light too keep this from happening on my 2020.
Do the front diffs/transfer case have breathers?
YES! I have a lexus GS sedan, which is a Sedan with Toyota truck parts, and my front rear breather was clogged, I had a leak from a seal. I cleaned it and it stopped.
Where is he from?
I really wish you worked out of Florida!....
Remove the vent and check if it is blocked internally.
problem: condensation from human perspiration will form on the inside of bag.
driving down from canada
Great!
Just get the money meter running. Cleaning, disposal, toad testing, etc are all in the clock. No book labor estimating on this. Ps. What sauerkraut is your choice?
How much sauerkraut do you eat? I notice you seem to have a LOT of those BIG sauerkraut bottles.
Where's your shop? I want to bring in my Highlander for some great service :)
Regarding the new Tacomas, with inferior parts being made in Mexico and China, I don't believe they will be a bullet proof as the older ones.
Why not use an impact wrench instead of a breaker bar to avoid the risk of swaying on the hydraulic lift? Please keep making more Tacoma vids. Thank you!
this is a nightmare if you live in New England!!!
I bet it still pluged up inside the axel breather needs pulling and cleaning out
Are you in Connecticut
He sure is! Right down the road from you. Nevermind all of those California plates!
I guess putting a question mark there was too much work for you.
I have changed about 5 seals on the left rear hub. But I still get some oil dropping. What could be the issue? I needed help.
Longer ratchet and torches one heat up the plug
I am worried that one day he will completely snap. Such a craftsman should not have to work on dirt clods.
Do you also do Subaru? Make some subí videos!
Your accent sounds Ukranian. Wish you were in my area!
Can you tell me if the diff breather has a torque specification? Thanks 🙂
Rule of thumb is just till snug. Don’t over tighten it you don’t want to strip the threads. 😱
What's with the commenters talking about sauerkraut? Is it Octoberfest?
Acht tu leibe!
Put German tork on it
And make it gutten tight!
😁 Ade!
You are so meticulous in your work, I would not be surprised if there is some Japanese in your ancestry.
You should be pushing the breaker bar away from you, not pulling towards you.
I'm ripped off constantly by local mechanics nobody nice anymore
All haters world of shii
Never a good sign when there’s a risk of knocking a 5000 lb truck off a lift while using a ratchet on a stuck bolt.
Sour Kraut kills Covid-19. 🤣
he was paying for theses jobs to be done.... dealer rip off