Sharpening a chisel with the angle grinder - Quick and dirty hack
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This is a fast sharpening solution if you are on a job site and carry a few tools with you. You can repair your dull chisel quickly and move on to your work.
Tools and materials I propose:
Angle grinder: amzn.to/2E6uLAx
Metal cutting discs: amzn.to/2Wzcn85
Chisel set: amzn.to/2pILO1B
Grinder sanding disc adapter: amzn.to/2PvV6cv
Sandpaper discs: amzn.to/2CJXCHO
Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.
For more information about this project, go here:
tinyurl.com/y6...
----------------------------------------------------------------------------
You can support my channel through Patreon:
/ scrapwoodcity
----------------------------------------------------------------------------
For more scrap wood projects, please visit my blog:
scrapwoodcity.b...
My social media channels:
Facebook
/ scrapwoodcity
Pinterest
/ scrapwoodcity
Instagram
/ scrapwoodcity
twitter
/ scrap_wood_city
#woodworking #woodworkingtips #sharpening
Metal disc is not meant to be consumed on the sides , but only on the tips for cutting , this will cause your disc to explode
True. The method I propose is a quick and dirty solution.
Excellent, exactly what i was looking for. Saved me buying a belt sander just for sharpening chisels on the jobsite. I will try it tomorrow
Awesome to hear that
You can't grind tool steel at high speed !! This guy doesn't know what he's talking about ......do them by hand !!! If you can't do that you should be nowhere one of my sites 😂
@@AnthonyPurvis-bq5wp well thats silly. Ofcourse you can, you just have to do it intermittently so that it doesnt overheat. Ive been doing it fir years. Chisels on a jobsite get beat up, they hit nails and all sorts so you need something that will grind off a lot of steel. For a building site its good enough, but for a cabinet shop with Japanese chisels you definitely wouldnt use an angle grinder.
I have a set of cheap dull chisels, no sharpening tools but I do have a grinder. I really should try this method! Thank you.
Awesome, be careful and do it
Great advice especially the leather belt!!! Thank you
Got to have a plan "B" to get you out of trouble.
Good simple tip, there mate👍
You got it pretty damn sharp, impressive👌
Thanks, glad you liked it
That’s one quick way of doing it! 👍🏽
indeed it is, thanks for watching
Good little tip mate and as always really nicely made vid. Thank you!
Thank you Mark
2:03 sharpening against the edge is quite dangerous. If possible always sharpen with the edge.
I agree that's it is not the safest thing, so one should do it if he feels confident about it. But sharpening against the edge is the best way to go for me. But in most cases you we use a tool rest to do it!
when you grind on the sides of a cutting wheel, you are weakening its structure, it could explode later, use a flap disc better, the finish is better and there is no risk
It needs attention I agree! Although the disc has a mesh embedded in it and it is kind of difficult to explode!
@@ScrapwoodCity No sir, that mesh is to reinforce the wheel because it is thin, but if you grind and grind on the sides, it will remove abrasive material from the sides, which will make the wheel thinner and thinner, and at some point it will be thin enough to explode, thats why manufacturers always recommend not to use those wheels for grinding, specially on the sides...
Either should do
last but not least the hair test 🤣
Lol
FUCKIN HELL, he's gonna hurt himself baddd. IF THE DISC IS SPINNING TOWARDS THE EDGE OF THE BLADE, FLIP THE EDGE SO IT'S FACING THE OPPOSITE DIRECTION.. where he's holding it, he needs to flip it so that he has it facing down. just imagine him taking the chisel off, turning it upside down so he's holding the handle above the blade now, and then putting the edge of it on the same exact spot on the disc that he was doing before- his chisel is just facing the opposite direction. NOW THAT WOULD BE SAFE.. that way the edge won't catch and dig into the disc and then get shot out of your hand- probably giving yourself a nice cut on your hand and maybe more. advertising some seriously dangerous methods.
Use what is at hand and do not look for another. GooD))))))))
true, thanks for watching
Really good technique !
thank you
Great tip. Thanks!☺
thanks for watching
@@ScrapwoodCity yep!☺
Μπραβο φιλε μου...πολυ καλο tips...Να σαι καλα!!!!
Χαίρομαι που σου άρεσε, ευχαριστώ
Does it work on Pubic hair ?
Thanks for sharing that
thanks for watching
Looks dangerous holding it against the rotation. What if it digs into the plate? It will jank it out of your hand and will cut you bad.
Lifesaver my dood
Εξυπνο γρηγορο κ καλο! 👍
Ευχαριστώ αδελφέ
That's cool
Thank you
Cutting disc is not designed for side pressure - be careful with that
Indeed it isn't. this is not an everyday use method
Hello! Can you suggest a better disc? I got one that is much thicker but it’s written for “stone” on the label. Can I still use it for making a nice bevel on my chisels?
Ωραίες συμβουλές, ευχαριστούμε που τις μοιράστηκες :)
Εχω μια απορία, υπάρχει περίπτωση κάποιο απο τα εργαλεία να κάνει για σκάλισμα η σκάψιμο σε πλαστίκο PLA απο 3d pen ?
Ευχαριστώ . Αν είναι αρκετά ακονισμένο λογικά κάνει . Το PLA και το ABS δεν είναι πολύ σκληρά υλικά.
That grinder disk could break off and fly towards your face easily...
Yes indeed. You need to be extra careful and wear a face shield.
👏👏👏👏👍👍👍👌👌👌🔩🔧🔨. Saludos.
Έλληνας μπράβο ρε φίλε και εγώ θέλω να κάνω τέτοια που είμαι μικρός αλλά δεν έχω τον πάγκο και τα εργαλεία
Σε ευχαριστώ. Ακόμη και στο μπαλκόνι μπορείς. Ξεκίνα με 5 βασικά εργαλεία. Τα πολλά εργαλεία αποκτώνται σιγά σιγά και με τα χρόνια. Η αρχή είναι το 50%.
@@ScrapwoodCity οκ θα το κάνω αν και έχω κάποια εργαλεία διότι έχω ξυλόγλυπτη νονό οπότε θα προσπαθησω
Pls make video how to make a bass guitar
Dont take the burr off the back with grinder😬🙈
Lol
Ωραία η δουλειά σου φιλε μου αλλά τίτλους στα αγγλικά,ομιλία στα αγγλικά,αγγλικό όνομα καναλιού τπτ που να δείχνει Ελλάδα...μήπως απευθύνεσαι μόνο σε ξένους?ειμαστε και εμείς εδώ!!
Κατ'αρχάς σε ευχαριστώ. Κατα δεύτερον προσπαθώ να απευθύνομαι σε όσο μεγαλύτερο κοινο γίνεται. Και εννοείται αυτό είναι εφικτό μόνο με τα Αγγλικά. Το ελληνικό στοιχείο είναι μέσα μου και αυτό φαίνεται από τις κατασκευές μου. Όπως για παράδειγμα η ποντιακή λύρα και ο μπαγλαμάς!
why does he speak with an indian accent?
Mine is an Indian accent, not his.