The level of thought, care and respect you give towards the specific use case of your product is top notch. You also have a knack for clearly and concisely explaining your process. Great work!
Nicely done. I need to have several drive up ramps/aprons from the graveled road into my newly built garage. I have four areas that require ramps entering the building so that will finalize my exterior work. Thanks for the video showing how you poured and finished the concrete. I'm anxious to have my ramps done. So in order to control the slipping of poured concrete, just make the mix drier so gravity doesn't make it shift. Enjoyed a full-watch. I learn something new every time I watch your vids. 👍🏽🤠 02/23/24
Lovely work Mike. A neighbor asked if I could build him a wheel chair ramp and since I have only done a bit of concrete work I said no. LOL. But if I had this kind of skill I would have been good. Thanks for sharing.
This is so lovely to watch. I don't suppose you could all come to England and make one for me could you? Just joking, it would be wonderful but I'm broke. Thanks for the film and teaching.
I think you are right about screeding uphill. I'm no expert, but I found that screeding downhill tends to drag the concrete from behind the screed leaving it low. The wetter the mix, the worse the effect because gravity helps to move the concrete down hill. I do have a fair bit of experience pushing wheelchairs around and dealing with four wheel walking frames though and the cut joints in the concrete are a good idea as some people can get hung up on the smallest bumps, especially with the wheeled walking frames. I like the slope too as it helps with decent control more than anything. I have seen a walking frame get away from someone that was going down a steeper ramp and they were not strong enough to work the hand brakes. That sort of thing can be pretty nasty. Good job and thanks for taking the time to think about the people who might make use of your concrete artwork.
You did a nice job on the ramp. You may not be aware of how dangerous blowing concrete dust (silica) is without the use of a mask to protect your lungs. Silicosis is an interstitial lung disease caused by breathing in tiny bits of silica, a common mineral found in many types of rock and soil. Over time, exposure to silica particles causes permanent lung scarring, called pulmonary fibrosis.
Hello Mike, great work. I learned a lot. I am working on building a concrete ramp and having hard time finding handrails like in this video. Would you mind sharing the manufacture's info? Thank you.
Hi Mike, another great video. Have you done any work with fiber optic concrete? Was really wondering how you felt about its uses, costs, and durability? Are there any other new technologies your excited about?
I have made ramps in my cellar but the kept sliding down. I had to keep pushing it up. Looks like thinking consistency is better. Why did you cut those lines in it after? How deep do you go?
Americans With Disabilities Act of 1990 (ADA; Pub. L. 101-336) The ADA established accessibility guidelines for buildings and facilities (see Phillips et al., 2020; Foti & Koketsu, 2013, pp. 179-194; U.S. Department of Justice, 2010) Accessible route: The minimum clear width of an accessible route is 36 inches, except at doors. Ramp The maximum slope of a ramp is 1:12. Ramp slopes between 1:16 and 1:20 are preferred. Most ambulatory people and most people who use a wheelchair cannot manage a slope of 1:12 for 30 feet. The maximum rise for any run is 30 inches. The minimum clear width of a ramp is 36 inches. A ramp run that has a rise of more than 6 inches or a horizontal projection of more than 72 inches should have handrails on both sides. Stairs: All steps should have uniform riser heights and uniform tread widths of no less than 11 inches. Handrails Clear space of 1-1½ inches between the handrail and the wall A height of 34-38 inches, or waist height depending on the person’s height, measured to the top of the gripping surface from the ramp surface or stair nosing, is recommended for adults. A maximum height of 28 inches is recommended for children. Doorway The minimum clear opening is 32 inches. (Note: The minimum clearance width for a standard adult-size wheelchair is 26 inches; the minimum clearance width for a walker is 18 inches.) Thresholds at doorways should not exceed ¾ inch in height for exterior sliding doors or ½ inch for other types of doors. Raised thresholds and floor-level changes at accessible doorways should be beveled with a slope no greater than 1:2. Door hardware for accessible door passages should be mounted no higher than 48 inches above the finished floor. Wheelchairs: minimum of 60-inch diameter or a 60-inch by 60-inch T-shaped space for a pivoting 180° turn to avoid the need for repeated tries and bumping into surrounding objects
The level of thought, care and respect you give towards the specific use case of your product is top notch. You also have a knack for clearly and concisely explaining your process. Great work!
Nicely done. I need to have several drive up ramps/aprons from the graveled road into my newly built garage. I have four areas that require ramps entering the building so that will finalize my exterior work. Thanks for the video showing how you poured and finished the concrete. I'm anxious to have my ramps done. So in order to control the slipping of poured concrete, just make the mix drier so gravity doesn't make it shift. Enjoyed a full-watch. I learn something new every time I watch your vids. 👍🏽🤠 02/23/24
Thank you
The attention to detail on the finish is really cool. I didn't know about using a broom to create that texture before this video.
Mike, lots of respect for your quality of work and your concern for how your finished product will benefit future users!
🎉
Nothing better than watching people who’ve perfected their craft at work!
This video answers so many questions of concrete work, you really present it as an art and so thoughtfully done, thank you!
Awesome job! You guys are always about details and creating a great finished product. Keep it up from NC.
Thanks! Will do!
Lovely work Mike. A neighbor asked if I could build him a wheel chair ramp and since I have only done a bit of concrete work I said no. LOL. But if I had this kind of skill I would have been good. Thanks for sharing.
Beautiful finished product. Thanks for sharing the completed job. Can't wait to sign up for your training channel
Awesome! Thank you!
Nice job with the wheelchair ramp
Thanks Phillip!
Great taking out the slumps with the wooden straight edge on the slope. Plenty wouldn’t bother!!! 👍💪
I really enjoy your videos.
Very informative, and you have a great way of explaining it to a beginner
always great to the complete finish ! thanks for sharing...
FANTASTIC JOB!!! and great additional links 💯
Cracking job mate very clean finish 😊
wow turned out great, good job Mike and team.
Thank you!
Mike #KeepPounding congrats on your classes... 👌🏿👌🏿👌🏿👍🏾👍🏾👍🏾
Thank you:)
Thank you for using sealer.
Another great job, I like the attention to detail around keeping the broom clean.
Looks Terrific. Good Work Guys.
Best Ive Seen. Great Attention To Detail.
Thank you very much!
This is so lovely to watch. I don't suppose you could all come to England and make one for me could you? Just joking, it would be wonderful but I'm broke. Thanks for the film and teaching.
Beautiful work!
Excellent excellent video brother keep up the great work
Mike, you are doing a great job.
Good job Mike!
Thanks
Very nice job brother
nice work mike !!!
I think you are right about screeding uphill. I'm no expert, but I found that screeding downhill tends to drag the concrete from behind the screed leaving it low. The wetter the mix, the worse the effect because gravity helps to move the concrete down hill. I do have a fair bit of experience pushing wheelchairs around and dealing with four wheel walking frames though and the cut joints in the concrete are a good idea as some people can get hung up on the smallest bumps, especially with the wheeled walking frames. I like the slope too as it helps with decent control more than anything. I have seen a walking frame get away from someone that was going down a steeper ramp and they were not strong enough to work the hand brakes. That sort of thing can be pretty nasty. Good job and thanks for taking the time to think about the people who might make use of your concrete artwork.
Class outfit 👍Nice work!
Thanks 😁
Looks good nice job👍
Thanks 👍
Great job
Thanks Tom!
Such good videos
Great stuff
You did a nice job on the ramp. You may not be aware of how dangerous blowing concrete dust (silica) is without the use of a mask to protect your lungs. Silicosis is an interstitial lung disease caused by breathing in tiny bits of silica, a common mineral found in many types of rock and soil. Over time, exposure to silica particles causes permanent lung scarring, called pulmonary fibrosis.
Great video.
Hello Mike, great work. I learned a lot. I am working on building a concrete ramp and having hard time finding handrails like in this video. Would you mind sharing the manufacture's info? Thank you.
Can you put heat strips or something so ice and snow will stay off
I have a hight of 23 inches for a lenght of 21.5 feet....will this get approved to be done without a landing?
Nice job Mike! I'm curious as to how the handrails are attached.
They were core drilled and grouted in.
@@MikeDayConcrete Thanks!
Did you vibrate the concrete?
What was that you used to cut your jionts
Hi Mike, another great video.
Have you done any work with fiber optic concrete? Was really wondering how you felt about its uses, costs, and durability?
Are there any other new technologies your excited about?
how nuch it cost tobuild a ramp like this?
What broom do you like? Brand?
I have made ramps in my cellar but the kept sliding down. I had to keep pushing it up. Looks like thinking consistency is better. Why did you cut those lines in it after? How deep do you go?
hey! i would like to ask. does the ramp need a foundation?
Americans With Disabilities Act of 1990
(ADA; Pub. L. 101-336)
The ADA established accessibility guidelines for buildings and facilities
(see Phillips et al., 2020; Foti & Koketsu, 2013, pp. 179-194; U.S. Department of Justice, 2010)
Accessible route: The minimum clear width of an accessible route is 36 inches, except at doors.
Ramp
The maximum slope of a ramp is 1:12. Ramp slopes between 1:16 and 1:20 are preferred. Most ambulatory people and most people who use a wheelchair cannot manage a slope of 1:12 for 30 feet.
The maximum rise for any run is 30 inches.
The minimum clear width of a ramp is 36 inches.
A ramp run that has a rise of more than 6 inches or a horizontal projection of more than 72 inches should have handrails on both sides.
Stairs: All steps should have uniform riser heights and uniform tread widths of no less than 11 inches.
Handrails
Clear space of 1-1½ inches between the handrail and the wall
A height of 34-38 inches, or waist height depending on the person’s height, measured to the top of the gripping surface from the ramp surface or stair nosing, is recommended for adults.
A maximum height of 28 inches is recommended for children.
Doorway
The minimum clear opening is 32 inches. (Note: The minimum clearance width for a standard adult-size wheelchair is 26 inches; the minimum clearance width for a walker is 18 inches.)
Thresholds at doorways should not exceed ¾ inch in height for exterior sliding doors or ½ inch for other types of doors.
Raised thresholds and floor-level changes at accessible doorways should be beveled with a slope no greater than 1:2.
Door hardware for accessible door passages should be mounted no higher than 48 inches above the finished floor.
Wheelchairs: minimum of 60-inch diameter or a 60-inch by 60-inch T-shaped space for a pivoting 180° turn to avoid the need for repeated tries and bumping into surrounding objects
Good video. From a pulmonary perspective- can't be good breathing that dust!
Was caulk applied to the saw-cut lines? Water/snow can seep below and cause the concrete to heave, especially with the impermeable foam below.
Could I get a link for the sealer you used? Thanks!
Mike how do you do an aggregate finish on concrete? I do this for a living and I don't know
layman here, forgive my ignorance: so is the ramp just filled in with compacted gravel then up until four inches from the top?
what saw do you use to cut ths joints?
Seal it that quick?
If you bull float the opposite way of the screeding you would help your highs and lows.
On a slope like this it doesn't work that good, been there and tried that many times.
@@MikeDayConcrete use a lighter bull float without a knuckle
Hey my name is Mike Day!!!!!
Silivio and Paulie to Richie, "we need you to build beansie a ramp, make it how do you say wheelchair accessible.."
Concrete ramp on concrete floor ten feet long
Mike should answer their followers
Saw cutting with no eye protection. You never know who's watching.
Safety glasses?
They use safety socks - don't need glasses then.
How would you build railings for the ramp. I have the same ramp just need ideas
🪜
They hire a welder to core drill holes and install a really nice metal railing. He builds it himself, and installs it all by himself.
Dude great stuff you do. Mask up cement dust KILLS.
How much is build like this cost on the handicap ramp with stairs