TROUBLESHOOTING POWER SUPPLY DOLPHIN / MAYTRONICS POOL VACUUM / POOL ROBOT
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- How to troubleshoot your Dolphin / Maytronics pool vacuum / robot power supply using typical multi-meter.
Buy multi-meter or new maytronics/dolphin power supply:
✅ ✅ 👉 Multi-meter: amzn.to/3AKxwm0
✅ ✅ 👉 Maytronics Power Supply: amzn.to/3VwiNTT
✅ ✅ 👉 Maytronics: amzn.to/3V64uW5
#poolcleaners #poolvacuum #maytronics
Buy multi-meter or new maytronics/dolphin power supply:
✅ ✅ 👉 Multi-meter: amzn.to/3AKxwm0
✅ ✅ 👉 Maytronics Power Supply: amzn.to/3VwiNTT
✅ ✅ 👉 Maytronics: amzn.to/3V64uW5
Thanks
😊
Thank you for being descriptive in your narration, because when you said "so you can see", what we needed to see was off the top of the screen! 😂Thankfully your description was enough, I hope.
Thank you for this video! I was able to diagnose my dead robot back to a bad power cable. Had 30V out of the controller and dead at the other end of the cable. swapped the cable and the robot is back cleaning the pool.
How did you test the other end of the cable?
Great useful video thanks
Great information thank you
I'm getting 3V output from the Power Supply unit. I confirmed the power supply itself is getting 120V from power outlet.
Any tips on how I should troubleshoot this further? I'm hoping maybe I can replace a blown fuse or something?
Can't see what you're talking about
I get 14 v output only. What should I do?
Very useful
I have a similar robot (Water Trends Inferno 2) and the power supply will not even turn on. It's not even a year old. Any suggestions for troubleshooting the problem?
Same. Any luck?
@@kevinmaclean5880 It was the power supply. I contacted the company and they sent a replacement.
My power supply doesn’t turn on any advice?
I get 34 volts dc . Is that bad?
I have 31.4 volts. Is that a problem?
I measure my output and I get 29.3v whether its on or off.
I enabled Bluetooth without realising that while power supply supports Bluetooth, my dolphin doesn't.
Now the dolphin never starts.
Can't see anything.
Mine doesn’t turn on I think these suck I’ve had 2 go bad in 3 years
Thanks for the video
This video is completely worthless. Camera angles tell me nothing no lighting on where to put probes. I think he tried to do it on one take and failed.
Mine just blinks and it’s only putting out 7 volts to the blue cord
Mine does the same thing any clue what that may be?
@@N.R.Legend I got a brand new Polaris 4x4 and haven’t looked back. My guess was the board on the power supply got wet and shorted and reset itself. No way to program it without source code
video is of feet and not where you are connecting so not able to help me.