How to Fix Timber to Brick or Concrete - The Most Solid Method!
ฝัง
- เผยแพร่เมื่อ 24 มิ.ย. 2022
- Do you want to learn how to fix timber to concrete or brickwork? In this video i will show you the most solid method to fixing timber to brick, block or concrete. This can be used on all kinds of wood and in all different shapes and sizes. This is a great beginners DIY guide and the skills that you will learn here can be transferred to many different jobs around the house or garden.
Link to the tracer pencil - amzn.to/3tVoNu1
Link to the tracer pencil with lead refills - amzn.to/3ybfB77
🛒 My Shop -www.amazon.co.uk/shop/thediyguy
Consider leaving a super like if this video was of value. Think of it as a tip. All tips go toward channel improvement and material costs.
► BECOME A MEMBER OF THE DIY CLUB Click! 👇🏼
/ thediyguy1
► Get FULL access to the Discord Group and other perks!
Follow me on Instagram 👉 the_diy_guy_youtube
Thanks for watching The DIY Guy. My mission is to bring you the best Tips, Tutorials and Tools to help you learn and save money.
Please be advised that this is only a guide which is intended for informational, educational and entertainment purposes and The DIY Guy cannot accept responsibility for any work undertaken. Be safe and have fun! The Amazon links above are affiliate links and as an Amazon Associate I earn from qualifying purchases. I may earn a small commission if you purchase via the recommended links, however this will not cost you any extra.
A 25mm washer between wood and coach-bolt head will give a better distribution of pressure onto wood. A well made video with good directions. Well done!
Thanks for the comment 👍
Can’t believe he didn’t washer it tbh
Your 100% .. the washer is the right job
Would you have to make the initial hole larger to accommodate the washer?
@@justintemp, the recess was made with a 25mm bit so the 25mm washer will fit
Awesome content, from all the DIY YT'ers out there, you're the most thorough one and easy to follow for beginners. Thanks for bringing this awesome content!
That's exactly what I try to deliver. Thanks for your comments 👍
Clear presentation and instructions explaining 'why' as well as 'how'. Good camera work and editing. Great instructional video.
Your videos are so clear and easy to follow. Thank you for your time, excellent as always
Thanks a lot. Glad you like them
This is such a useful video. I have already used it to fix upright metal verticals to support a lattice fence on a garden wall.
And I’m using it again today to work out how best to fix the oak timbers Ive had cut, to make a fireplace surround.
This latter project needs to look good, as well as fix tightly and safely, so I’m going to set the bolts a little deeper than you suggest, and find another video to teach me how to make oak dowels to cover the bolt head and blend with the timber.
I’ve also got to be very careful not to split or crack the old bricks.
Thanks for a very practical video - and for covering the “do I drill into brick or mortar?” issue, which I had wondered about.
I really appreciate the no-nonsense presentation. I loathe the music, logos, and usual nonsense in so many folks’ channels these days.
I hope your channel goes from strength to strength.
Really enjoy your videos. Easy to follow.
Exactly a video i was looking for. Thank you.
Thank you for your very useful guide.
Absolutely loving your videos mate, so helpful. You got yourself a new subscriber.
Thanks for subscribing 👍
Great video as always, you are fast becoming one of the best DIY TH-camr's in UK. Thank you and keep up the good work!👍
Really appreciate the comment 👍
@@TheDIYGuy1 great
Great tutorial
Great video again.
I've found that I can't hold a long bit of wood sready enough to reliably mark all the holes at once. I've "missed" on some too often. What I do is mark and drill the first hole and attach the batten. Then mark the rest while the batten is firmly held, remove the batten (or some times just slacken and turn it out the way) then drill the rest. I get a better sucess rate that way. Also, when finally fixing the batten I loosely fit all the bolts first so I can move it to get the other three in without problems before tightening them all.
For drilling, you do not necessarily need and SDS drill, but you do need a hammer drill with a masonary bit. It is true that, with larger bits in a Jacobs chuck can slip, but it will work.
For marking the holes I prefer wittnessing the wall through the hole with a small size masonary bit (in a drill of course). With my old eyes a pencil mark can be hard to find.
The tape trick works for wood bits too as does using one of those rod depth gauges.
drilling straight square (perpendicular not non round) holes is an art in itself that I get right only about 75% of the time.. How do you cope with that?
I do the same re fixing the top end first and marking the other holes. This is also the time to use a level to check for vertical, not after the holes are drilled. I agree SDS drills are useful but not essential for this job.
Thanks mate! Replacing our old gate that’s joined to the house soon and this will really help!
Brilliant, your welcome
A straightforward and informative video with no BS, the steps very clearly outlined and understandable for a beginner. I subscribed and am going to binge watch the rest of your channel. 👍 😃
Haha thankyou
😂 always one
@:Mosey: Ferocious. Some viewers may have no experience at all and need a guiding hand. When learning something new I prefer too much info - rather than being left to guess when something is not obvious or explained in detail.
Only recently found you channel, and I'm impressed, have watched a couple of your videos and I will definitely be coming back for more, Thank You.
I'm glad you like my channel 🙂
Thanks teacher
Simply awesome
Thanks. Good DIY Stuff!!
Love the Diy video's your making. Keep them coming. Thanks
Thank you! Will do!
What a great video so easy to understand ordered that pencil right away to make it even easier to do
Very helpful thanks for explaining all so well in detail,it makes more sense 😀
Glad you found it helpful
Great vid, what I do as well is use a penny washer, it gets an even stronger fixing but it’s more chew as sometimes you’ve got to core the washer out to fit the screw/Coach bolt
👍 cheers
Excellent tutorial.
Many thanks!
Brilliant video. Neat job.
Cheers bud 👍
Amazing simple videos that help a lot...great work
Glad it helped
Thank you very well explained.
Glad it was helpful!
Great explanation!
Thanks
You're welcome!
Hi, just subscribed to your channel.
I have always used this method until recently.
I had to fit a very heavy awning canopy to the side of our house. I used masonry/ concrete screws. No plugs required and a super strong fixing.
Thanks for subscribing
Amazing brother trust me you explained so well 💪
Thanks, glad you enjoyed
Just gained a follower! This has helped me build a stud wall for media wall thank you!
Any time! Thanks for following
Nice video. Personally, I always drill small pilot holes as I find it is tricky to stop larger bits wandering across the surface of hard materials like bricks.
👍
Great video…explains all in layman terms..thanks!!
Glad it was helpful!
Another cracking video!
Thanks a lot Ross, always appreciate your comments and support
Great video thanks mate 👍🏻👍🏻
Your welcome 👍
This is like the ‘For Dummies’ books, but better as it’s visual and excellently presented. Still waiting for the loft lighting video 😊👍 Superb
Cheers! Its on my list and I promise I will get around to it soon
I like your channel, have seen quite a few of your videos, so I subscribe to support. Always good to have helpful DIY tips. Thanks.
Thanks for the good video
Brilllllliant mate!
👍
Great content and easy to follow. I think weekly or fornightly videos would be great even if it is small diy jobs.very easy to follow.
Hi. Thanks. I currently do fortnightly videos 😃
Nice one, thanks
Super handy, thank you.
Glad it helped
Great Video 👍really helped when playing yo build my media station in the lounge
Glad it helped
Great video !!!! thanks
👍
Great vid! Just watch that damp course if you’re drilling downwards..
It’s worth mentioning that if you are going to measure the depth of hole be certain that the screw or bolt will fit. If you only drill the depth of the plug then sometimes you will have problems with longer fixings.
Great video 😊
Good tips - thanks!
Glad it was helpful!
Great thanks
Your welcome 👍
Brilliant mate......love to see the end product. I am about to line out my garage so this has helped. Just need some info on appropriate wall covering and damp membranes etc.
Cheers bruv
Dave👍
Thanks 👍. Good luck with the garage project. There's so many options with regard to DPM
Really good video
Thanks a lot 👍
Good point about concrete screws into mortar. Try a Marxman spray marker too, even better than a tracer in those situations. ✌️
i like to do a pilot hole with smaller masonry drill bit i find it helps guide the larger drill bit more accurately
Nice one
This video I give it 10 out off 10,
Cheers
Nice method, just a washer would improve load spread!
And a nod to the Tracer pencil, they are Ace! 👍
Using a marxman marker is an alternative to Tracer pencils especially on surfaces where pencil does not show up well, the green spots stand out on nearly all surfaces.
This video was very nice
And you do god work
Am in iraq
Legend
Good vid, thanks, it will definitely help .. what size coach screw did you use, and what type of wall plugs did you use please.. keep up the vids !!
Great video exactly how I do it. The only difference is that I’ve discovered Marxman for marking the drill holes rather than tracer pencils. I found the fluorescent Green easier to see.
👍 thanks
best regrads from PARIS
😀
Nice video thanks for the time you take on helping out your viewers, only thing I seen I would do differently here in the USA is use treated timber our codes don’t allow us to install non treated timber on any concrete surfaces including brick , thanks again.
Very welcome. Always interesting to hear the regulations in other countries 🙂
Great video! Would this also work for very soft 70s aerated blocks?
That was easy 👍🏻 thanks you have just saved me from hiring a joiner 👍🏻
No problem 👍
What about expansion, what about damp? etc? Love the trace pencil, I'll get one.
Have you done a video for using Rawlbolt Sheild Anchor - Loose Bolts? As a DIYer need to put up some Gallows Brackets which will support concrete tiles so needs to be very secure. Thank you,
My guy already done this trick with moving my fence worked a treat
👍
Another great video where did you buy the coach bolts and wall plugs from.looking forward to the next stage.keep up the good work 👍
I got them from Screwfix but you can grab them anywhere really. Spend a little time planning the length of bolt and plug that you need.
Weldone, my problem solved.
👍
Always use "treated" wood on the cement floor and maybe even a plastic barrier.
You can also use concrete screws/bolts. You can drill the pilot hole straight through the wood into the brick/block/concrete with a masonry bit and then put the bolt in with an impact driver. No need for plugs and less chance of cracking concrete, especially if you are near the edge. Great channel, love the content and presenting style.
Thanks for the comment 👍
I've just made a large wooden gate and attached the post to the side of the house with concrete screws like you said in your post. I asked the builders suppliers what he recommended for my job and he gave me 6mm ones ( 16mm long) to attach my 10mm post.
It appeared to do the job but unfortunately the weight of tbe 3 m gate has pulled them within a few days. I think I'n going to have to change up to something heavier. ( Yes all 4 holes were in the red brick, anf not the mortar, before you ask.)
@@trevorbest-gn2dqwell 10 mm wood and 16 mm screw sounds like problem if i was using it i would use atleast 20mm screw minimum but more likely 30 up
I think he just missed the zeros,was meant to be 100mm post and 160mm screws
@@trevorbest-gn2dq For something with that kind of weight it pulls laterally, use wedge anchor or sleeve anchors (galvanised external job so 100mm is maximum length in galv)
I did some framing work and used Multi Fix Concrete Screws which were easy to use with a solid bite. No need for plugs. I suppose it depends on what the framing work is for. Mine was only for stud work on a feature wall that had to be built out.
Absolutely depends on not only.the application but your preferred method.
To add even more place a correct sized washer in the hole it spreads the load evenly
Hi , thanks for uploading such a professional quality " how to " vid 👍 .....do you reccommend using m12 coach screws or are m10 adequate in your opinion? Obviously lengths of wall plugs and screws are dependant on our own personal requirements. Thanks in advance !
Personally I like to use m12s. Thanks 👍
Good video. Another suggestion is to blow out the dust from the hole you’ve just drilled, and just before putting the bolt in, apply some liquid nail into the hole, and then the sleeve anchor.
👍
Hi, great video, thanks. Please can you show how to fit the batons at the top and bottom of a garage that has concrete (breeze block??) walls. Looking to line our garage, but not sure how to do the floor or near ceiling part with the batons, or the corner areas. Want to insulate and put up white wet wall or PVC to give it a clean look (if bathroom wet wall is even evommended?) ... Thanks, Love from Scotland, or ... Please can you come to Scotland!! 😊x ..
Thanks for the video. Would you recommend coach bolts for a pull up bar on a single skin brick wall? I’m debating between the set up you’ve shown here (with batten) or anchor bolts or even using resin fixings. Cheers!
Yes this method is perfect
Was always a screw/countersink fella, hard work with 3x2". This looks firmer & more straightforward. Need a socket set now, thankyou for sharing 😃
No problem 👍
Will 10mmx70mm coach bolts be ok. Using the same wood as you got there. Thanks
Silly question. I have 12mm bolts and need to buy the spade drill. Is the head size of my boss the same as yours and will a 25mm be the right choice? Cheers
Great tips. Thoughts on frame fixings or resin anchors? Would you recommend these? Thanks as always.
Frame fixings yes, but they require you avoiding mortar joints in brickwork. I use them when fitting doors or windows mostly. I quite like the resin fixings, they do the job well but I guess I'm more old school and the coachbolt and plug method has NEVER failed me and is more user friendly for the DIYer
Hi will coach bolts hold as well as rawlbolts I would rather use coach bolts as easier to remove im putting a porch on a brick wall.
Great videos with great information. With that dialect I reckon you're from the Norfolk area...as I'm from Suffolk! lol
I am indeed ☺️
I like your electrical vids and learn a lot but this was a propper amateur job.
Recess good, washer, thunderbolts through middle of brick, done.
Can also use the Hilti 2 part resin system, throughbolts as people have mentioned but I've never had trouble with thunderbolts
Amazing mate cheers.
Question--
Are you not concerned with having your timber tightly against the brickwork?
Asking in regards to mould or moisture build up behind the timber--as that doesn't look like treated pine and there isn't any sort of vapour barrier or sealing on the back end.
Just wanted to get your thoughts.
Another pro tip for that electric tap--Instead of tearing it off, leave 10 cm hanging off like a flag before you rip. Much easier to see as it spins round.
Excellent video and instruction, thank you. One caveat on drilling the brick. If it has a traditional ‘frog’ then no problem, but if it is a modern cheaper brick, it may just have 6-8 round holes for the frogs. If you drill into one of these then you lose some of the integrity required for the plug to expand onto.
Well said!
Would you do this method to attach osb boards to the wall ?
Never had a dad to show me this so thanks bud
Any time 👍
Being on the block work does the timber need any sort of protection from the wall absorbing moisture/water from outside and rotting the timber attached to it? Or causing mould on the plasterboard once finished?
My previous house was an old Victorian one built from relatively soft bricks and soft lime mortar. Fixing anything to a wall (plus through thick soft lime plaster) could present problems that could not be solved by using any type of plastic plug because of oversized cavities.
I found that the best way to solve it was to cut a piece of scrap wood slightly larger than the hole, make a point on it and then hammer it in and saw off flush. Then screw directly into it without drilling a hole.
Interesting little tip there. If it works it works 👍
spot on used myself many times.
Yes always keep a bit of wood in my tool box plus a tablet of soap for the screw
I often just use my drill on gear 2 with hammer mode, whats the benefit of sds for a relatively shallow hole?
What if you dunt have an SDS drill, will a black n decker with hammer action do?
Is it necessary to use treated timber? Thank you
How do you ensure perfectly straight holes in both dimensions?
Hi can I use this method to hang something on a wood that behind it is a brick wall? like in a closet that is in front of the brick wall?
Just found you on TH-cam. Another great video. What are the plugs you’re using and are the specific to use with coach bolts? Tia
Thanks. They are fisher ones and can be used with any bolt providing you match the diameters
Isn't there supposed be 50mm space between the walls for stud wall fixings?
2nd Q
I'm doing DIY loft what size wall plate would I use?
Ive had success with Rawl Bolts. I think I prefer this method though.
👍
Would you be able to use the same process to fix a wooden shed to a concrete base?
Great video, nice walk through and explanation. I'm thinking of using this technique for internal bookshelves for a range of really heavy books. Do you recommend this for internal shelves? Thank you
Glad it was helpful!
@@TheDIYGuy1 Can I use the same bolts for internal shelves? Cheers.
Could I use this method for 2x4 into a dot & dab wall? I believe mine is a breeze block wall.