I’m Indonesian and I have to agree with you, Scythe coolers are very hard to find here and even if you can find them, they usually cost 50% above msrp. Take Fuma 2 for example, it still costs around $75 here. Luckily, my aunt from US is visiting me today and I requested her to grab a Fuma 3 from Amazon US for only $50. Hopefully, it arrives in one piece considering it’s a long flight 😅
I have the 2 Rev B and it is outstanding in terms of performance. The look as well + 3 more 140 fans in my Be quite case. Everything works like a charm. And last but noit least they are a bang for the bucks!
The side by side installation time lapse is quite cool and useful! Intel vs AMD brings up another important point that was highlighted in a recent Hardware Canucks video; how a cooler can perform well on one and not so well on the other (because of CPU internal layout and cooler design). It is really good to see cost effective options on the market though, especially when it seems like the cost of a lot of PC components are going the other way.
Replaced a 3 year old kraken with nice noctua fans on radiator with this fuma 3 (re using those fans too). Idle temps down 4-5c to 40-41C and just better temps overall on my 7700X. Let’s keep in mind this is $49.99. My kraken X53 was $129.99. This is a no brainer.
EU prices : I recently buy Fuma 3 for 58euro , now price jump to 82euro. Happy to bough it so low. Temps for my AMD 5700X with slight OC 100mhz paired wuith RX 7700XT OC in games {Hunt Showdown cpu 95percent load} 71C with 1500rpm........ For notice about Noctua , D15 cost 151euro.
Schythe is still alive? They used to be one of the big players around 2008-2010, they made some crazy coolers. I still have a Mugen sitting around. It looks like this cooler but without the fan stuck in the middle.
I got this without much thought. I looked up if it could cool a ryzen 7 5700x3d, it said yes so I ordered. If I could go back I'd probably get a peerless assassin se 120 but my cpu idles at 40, and I can always add another fan for an extra -5c. Overall I'd say its very solid for any i5,i7, r5,r7 more then reasonable price and quality.
a few years ago i had a be quiet pro 4 and this time i was really looking for a noctua but when i saw the price, the reviews and how sick the cooler looks i had to pick it up 😁 when i opened the box a few hours ago i was like a goddamn kid on christmas night 😂😂😂 that’s a good looking cooler out there and i can’t wait to mount it on my pc tomorrow 🤘🏻
Has a 92mm cooler compare been done on the channel? One of the let-downs I had with the prebuilt from ROG Strix with the G15CF (mid-tower) when I assumed (yes, that makes me an you know what (TH-cam will not allow that word)). I looked for a while, Noctua has one, but I stumbled upon another one for at least half the price. I had two requirements, it needed to fit and needed to be aRGB. I have now changed the airflow in the case to positive pressure in the case. I know a lot of people stick their nose up to pre-built computers and for the mid-range I like to say that Asus, do better. Do not put a measly stock cooler on the CPU when you have RGB everywhere else.
i have it with r9 7900x and i immediately noticed the idle temp also! mine set at 56c but keep in mind i set the fan rpm at 1090 at all time and it's dead quiet. so overall i'm so happy with the results so far.
is it true that the fans above 1100 rpm get löuder because of turbulence? so is this the reason that you set it to 1090? do you think with this rpm i could cool (a 7700x or even a 7800x3d ? had a fuma 2 3 years ago and.i was so shocked tgat it was soo quiet and good. want to build with scyrhe again.
@@shusui9665 first of all, i hugely and strongly and massively recommend you get the 7800x3d due to hou efficient the cpu is compared to none x3d. I built 4 7800x3d pcs with deepcool ak 400 and the cpu was so cool you don’t have to worry about anything and you don’t need the fuma 3 at all. I unfortunately had to set my cpu at 65w eco mod due to how hot it gets the 7900x. Any game i run gets instantly 81c to 85c. GET THE X3D SO YOU DONT HAVE TO GET A BEEFY COOLER FOR IT!
Also yeah it’s true regarding the loudy fan at idle. that’s why i set it at static 55% percent in the bios all time so i don’t have to see it get so much louder for a second than goes back to normal. It’s annoying and so weird.
@@shusui9665 i made a comment but youtube for some reason delete it. For the x3d? Easily cause i built 4 pcs with its so efficient with a so much smaller cooler with deepcool ak 400. And btw i had to set my 7900x to 65w eco instead of 175w because the fuma could not cool it whatsoever. Be warned, non x3d cpus is a struggle to cool it.
Since the 13900k wasn't hitting boost numbers listed on the product page, what are the highest level intel/AMD chips that it can cool AND allow for expected boost performance?
top cooler but >70€ in germany. So I would prefer Thermalright with better price to performance. Nevertheless, great video again (and again and again ...)
I got an ID-COOLING SE-225-XT Black CPU Cooler for my 5900X and it's been keeping my max temps around 72c for $40 USD. You might want to give it a go and see what you think.
That's ridiculous, you're not getting normal CPU performance under load, that's why the temp is so low. When you set the 5900x to max performance, the temperature will always hit 90 degrees. What is your CPU's score in Cinebench R23?
@@Musitdjan 90c? You must be doing something wrong. After running Cinebench R23 for 10 minutes my 5900X had a max temp of 73.3c with a max voltage of 1.481v. My ambient room temp was 21c and my score was 21126.
@@guitarprogrock There you go, my room temp is 24.5, R23 result 23750, and that's the normal result of a tuned CPU, not what you have. CPU idle temperature is 38-39 degrees. So, learn the topic. Scythe Fuma 3 + MX4
@@Musitdjan I have PBO turned off and my CPU voltage manually set to 1.325. There's not really any advantage to overclocking a Ryzen CPU. I used to do it, but mostly all I got was a lot more heat for an extra 5 to 10 FPS on the games I play. You might drop a couple degrees if you used Thermal Grizzly Kryonaut instead of MX4. This is the first time I've air-cooled my main PC. Usually I liquid-cool via a custom hardline loop. But when I upgraded this system I didn't feel like bending tubing, also water-blocks for my 6900XT are a bit too high priced right now.
I’m Indonesian and I have to agree with you, Scythe coolers are very hard to find here and even if you can find them, they usually cost 50% above msrp. Take Fuma 2 for example, it still costs around $75 here. Luckily, my aunt from US is visiting me today and I requested her to grab a Fuma 3 from Amazon US for only $50. Hopefully, it arrives in one piece considering it’s a long flight 😅
I have the 2 Rev B and it is outstanding in terms of performance. The look as well + 3 more 140 fans in my Be quite case. Everything works like a charm. And last but noit least they are a bang for the bucks!
The side by side installation time lapse is quite cool and useful! Intel vs AMD brings up another important point that was highlighted in a recent Hardware Canucks video; how a cooler can perform well on one and not so well on the other (because of CPU internal layout and cooler design). It is really good to see cost effective options on the market though, especially when it seems like the cost of a lot of PC components are going the other way.
their fans have always been a bang for thew buck especially their low profile coolers, thanks guys
I have the Fuma 2 and it is whisper quiet for my 13600K with just one fan in the middle.
I imagine the Fuma3 must be even better
Replaced a 3 year old kraken with nice noctua fans on radiator with this fuma 3 (re using those fans too). Idle temps down 4-5c to 40-41C and just better temps overall on my 7700X. Let’s keep in mind this is $49.99. My kraken X53 was $129.99. This is a no brainer.
Gear Seekers with the straight uploads, we eating good lads!
Banger of a video fams. Love seeing all these air coolers and how they perform
Absolutely love mine. Replaced a 240 AIO, temps are basically the same.
Try the fuma scythe 3 with the 3 rd fan.
EU prices : I recently buy Fuma 3 for 58euro , now price jump to 82euro. Happy to bough it so low.
Temps for my AMD 5700X with slight OC 100mhz paired wuith RX 7700XT OC in games {Hunt Showdown cpu 95percent load} 71C with 1500rpm........ For notice about Noctua , D15 cost 151euro.
Have the fuma 2 for my 5800x. Been pretty happy with it and it works well.
Schythe is still alive? They used to be one of the big players around 2008-2010, they made some crazy coolers. I still have a Mugen sitting around. It looks like this cooler but without the fan stuck in the middle.
I have 3 scythe fuma at home, two version 2 and one version 3. They rocks
I've got the Fuma 2 mounted on a Ryzen 9 3900X, and under a full load using Handbrake, I top out at around 84C. It's a great little cooler.
I got this without much thought. I looked up if it could cool a ryzen 7 5700x3d, it said yes so I ordered. If I could go back I'd probably get a peerless assassin se 120 but my cpu idles at 40, and I can always add another fan for an extra -5c. Overall I'd say its very solid for any i5,i7, r5,r7 more then reasonable price and quality.
I have it with my 7800x3d, been very happy with it.
a few years ago i had a be quiet pro 4 and this time i was really looking for a noctua but when i saw the price, the reviews and how sick the cooler looks i had to pick it up 😁 when i opened the box a few hours ago i was like a goddamn kid on christmas night 😂😂😂 that’s a good looking cooler out there and i can’t wait to mount it on my pc tomorrow 🤘🏻
the installation part is very important for me and what i skipped to in the video and had to slow down
I've used fuma2 for years. Limited fan speed is an issue on fuma2 but solved on fuma3 by adding extra 300 rpms or so.
Has a 92mm cooler compare been done on the channel? One of the let-downs I had with the prebuilt from ROG Strix with the G15CF (mid-tower) when I assumed (yes, that makes me an you know what (TH-cam will not allow that word)). I looked for a while, Noctua has one, but I stumbled upon another one for at least half the price. I had two requirements, it needed to fit and needed to be aRGB. I have now changed the airflow in the case to positive pressure in the case. I know a lot of people stick their nose up to pre-built computers and for the mid-range I like to say that Asus, do better. Do not put a measly stock cooler on the CPU when you have RGB everywhere else.
When are we going to get a scythe screwdriver themed build?
I like this
@@KlaireGearSeekers it's nice to be noticed by the people at the top!
I put this cooler on a I5 14600k and it keep the cpu in idle at 30*C and maximum 74*C in rendering and gaming.
I really loved the Scythe Mugen 4. Was a beefy tower to cool my 4670K
Mugen 6 should be out early next year ;)
i have it with r9 7900x and i immediately noticed the idle temp also! mine set at 56c but keep in mind i set the fan rpm at 1090 at all time and it's dead quiet. so overall i'm so happy with the results so far.
is it true that the fans above 1100 rpm get löuder because of turbulence? so is this the reason that you set it to 1090? do you think with this rpm i could cool (a 7700x or even a 7800x3d ? had a fuma 2 3 years ago and.i was so shocked tgat it was soo quiet and good. want to build with scyrhe again.
@@shusui9665 first of all, i hugely and strongly and massively recommend you get the 7800x3d due to hou efficient the cpu is compared to none x3d. I built 4 7800x3d pcs with deepcool ak 400 and the cpu was so cool you don’t have to worry about anything and you don’t need the fuma 3 at all. I unfortunately had to set my cpu at 65w eco mod due to how hot it gets the 7900x. Any game i run gets instantly 81c to 85c. GET THE X3D SO YOU DONT HAVE TO GET A BEEFY COOLER FOR IT!
Also yeah it’s true regarding the loudy fan at idle. that’s why i set it at static 55% percent in the bios all time so i don’t have to see it get so much louder for a second than goes back to normal. It’s annoying and so weird.
@@MegadetH666ksa thx very much. do you think 55 percent is enough for 7800x3d on stock?
@@shusui9665 i made a comment but youtube for some reason delete it. For the x3d? Easily cause i built 4 pcs with its so efficient with a so much smaller cooler with deepcool ak 400. And btw i had to set my 7900x to 65w eco instead of 175w because the fuma could not cool it whatsoever. Be warned, non x3d cpus is a struggle to cool it.
Gear Seekers is one of the best channels I've heard of!
Since the 13900k wasn't hitting boost numbers listed on the product page, what are the highest level intel/AMD chips that it can cool AND allow for expected boost performance?
how about the noise comparision?
Can u do 7700x and 7800 xt build
Gentle Typhoon was the shit back in the day!
In Hardware Canucks test the Thermalright Phantom Spirit beats it by a lot.
Would this be compatible with an old 4790k?
Recently got a Frost Spirit 140 BLACK V3 for 99$ au .. best price i can find the fuma 3 for here in oz is around 110$ :(
top cooler but >70€ in germany. So I would prefer Thermalright with better price to performance. Nevertheless, great video again (and again and again ...)
52,90€ bei alternate
I got an ID-COOLING SE-225-XT Black CPU Cooler for my 5900X and it's been keeping my max temps around 72c for $40 USD. You might want to give it a go and see what you think.
That's ridiculous, you're not getting normal CPU performance under load, that's why the temp is so low. When you set the 5900x to max performance, the temperature will always hit 90 degrees.
What is your CPU's score in Cinebench R23?
@@Musitdjan 90c? You must be doing something wrong. After running Cinebench R23 for 10 minutes my 5900X had a max temp of 73.3c with a max voltage of 1.481v. My ambient room temp was 21c and my score was 21126.
@@guitarprogrock There you go, my room temp is 24.5, R23 result 23750, and that's the normal result of a tuned CPU, not what you have. CPU idle temperature is 38-39 degrees. So, learn the topic.
Scythe Fuma 3 + MX4
@@Musitdjan I have PBO turned off and my CPU voltage manually set to 1.325. There's not really any advantage to overclocking a Ryzen CPU. I used to do it, but mostly all I got was a lot more heat for an extra 5 to 10 FPS on the games I play. You might drop a couple degrees if you used Thermal Grizzly Kryonaut instead of MX4. This is the first time I've air-cooled my main PC. Usually I liquid-cool via a custom hardline loop. But when I upgraded this system I didn't feel like bending tubing, also water-blocks for my 6900XT are a bit too high priced right now.
@@guitarprogrock So why are you bragging about your temperature if you have a stock CPU? 99% of Ryzen is overclocked.
❤ this cooler is good and reasonable price
i love my fuma 2!!!!
Would this be fine for the ryzen 7 7800x3d?
I just ordered for mine 😁
Use fuma 3 with 5800x3d and it works great
Got a scythe fuma 2 on my i9 11900, runs about 60/64 and not a great case for airflow.
and if you didn't like the video.. meh.. fucken' blow me.... lol... love ya work Nick
Dude show us how install that fking clip to the fans
Average Clock would be helpful too. And Cinebench 1 hour test and performance/score.
I would honestly say that those numbers are within the margin of error.
have you ever heard of Nutella? one of the best thermal paste out there.
I though Fuma 2 was one of the best cooler back to 2021
I think everyone knows this cooler
Everyone review it
Video wont load for me
TR PS 120 SE is better and cheaper.
Not necessarily. The Fuma 3 has a trick, you can actually mount a third fan on the back, which puts its performance beyond that of the noctuas.
Phantom Spirit is way better
No
@@Anton_dk proof me wrong and show me all reviews and the PS shouldnt win from Fuma 3
first