I got a couple GP8, ....just ordered a Thumb Cam, should be perfect for my 95x (GP6-Naked was too heavy to have good performance)......Next i need a Blackmagic Pocket 6K lol
Could you please find a way to upload several raw videos of the camera with the gyro data? I dont have but i want one and i would like to play with gyroflow and see how it might work, thanks love ypur videos!!
question .... what is that chip with the 100 on the top of it? it fell off now i have to hold it down with my fingers to get my camera to turn on. i would like a replacement
I do the 5v wire quick swap thing for my firefly xlite. Except for the tiniest of quads, I'd prefer to go the extra $80 and buy a backup for it. Great review though and this definitely has its place on really small stuff. Do the solar panels on your house help a lot on the power bill?
It will record gyro data, which will allow the footage to be stabilized via software post flight. For example gyroflow, although apparently it's currently not working with gyroflow, but that should be sorted soon. Unfortunately it will require cropping or zooming for the stabilization software to do its thing, so some loss of resolution. The Insta360 Go 2 and Caddx Peanut, record a larger area so after cropping you still get a reasonable resolution. I'll be curious to see how footage from this looks after stabilization.
DrainMan FPV what up pilot!? So in your opinion, would you say it is on par or worse than a session4 (superview off) with your use of it so far? If worse (im assuming) are we just splitting hairs or is the difference significant? Thanks for your review and keep it real my dude.
Great flying man, love the videos. Not a huge fan of this camera. Every video that I watch of this thing is majorly washed out. It looks like the settings are way over exposed. 11:01 pause there, you can barely see that tree on right because it's so blown out by the sun. 11:19 the sky is just totally whited out! This camera looks like it might only be best used when it's overcast, because when used around the sunlight the videos look the worst from what I've observed...
The Image Quality is Pathetic for a HD camera! Toatlly washed out, no richness in color, bland. It more looks like those SD/XVGA cameras released by Turnigy/Hobbyking with similar form factor/shape in 2010's than anything close to Caddx Peanut/SMO 4K/Runcam Orange etc !! I mean come ON!! processing and sensors have come long way from 2015's that camera of this size cannot produce videos a cheap chiese Android Phone can produce with similar sized sensor. If not $220 mark for Peanut/Insta Go, at least make some thing comparable at $100 mark !! $50 is just too much of cutting corners. Runcam Split etc Selling for $60 mark which doubles as live FPV camera feed are still better.
@@MontisTube knowing Runcam it will be version 3 or 4. Same company that put out crap year after year. Straight up milking the FPV market. Maybe Caddx or another cloner will do better if this cams popularity rises. I fell into the split cam craze. Not doing that again. I will say it has cool features they just need to up the quality.
@@MontisTube I believe gyro flow is supposed to be fixed before full release, but I certainly wouldn't be jumping on board if you want that functionality. It'll also be cropped for the stabilization to work and unlike the Go 2 or Peanut this doesn't have any extra resolution in the recorded files to maintain a decent resolution after cropping. I'm interested to see what it looks like with gyro flow, but don't think it will compare very favorably at a guess
Dear @DrainMan FPV I've notice a drop in your views and I think I know what's going on TH-cam Unsubbed people from your channel. I seen an updated video of yours on my TH-cam Page went over to yours and noticed I was unsubbed and I know for a act I subbed to you awhile back. Please announce to your viewer/fans to check their subscription!!!
It’s a $50 camera. This thing is going to be killer! Ordering one now.
The quads in the background....RESPECT!!!! Thanks for the review.
DrainMan ! You are the Best !
I ordered it before the video ended !
Thank you !!!!!
Thanks for the video! This cam actually seems to be good! My new race build might like one!
sweet lil cam bro!
imagine this on a 5in kwad!
as jay drone says..."pop n swap" from kwad 2 kwad wooooo!
This camera is perfect for micro long range drones, where you need something small and that can record for 15/20 minutes .
I'd take 2 for now this is a sweet thing to have put it on the rear of my quads
SICK VID BRO!!!!🔥 I am going to buy like 4 of these now 😂
Thank you I just place my order.
Great review of cool tiny budget camera. Definitely got my attention, perfect for my needs. 👍🤓
awesome video as always Drainman!
Not bad at all. It... actually looks pretty good!
i saw other reviews that gyroflow is not working. were you able to make it work?
Thanks for the review, just a little fyi they charge extra for the 3d printed mount ($5) I just pre ordered one
Smooth flow, Mr D !
Not bad Drainman . I’ll be getting one .
Nice Review. Thank you. Greetings SKAI
That looks really nice, thanks for sharing bro, greetings team #bckflp
Looks cool, could be an all rounder with a lot of open-ended capabilities, not with just FPV drone footage 👀
Very cool! I was very surprised! How does it go if the battery disconnects? Do you loose footage?
Great review. for 50$ i would put it on my thfs2 for sure!
WOW quality is not really bad at all!
does it record gyrodata for gyroflow?
Yes but there are problems with the firmware making it impossible to use with gyroflow. They're working on it but it's unsure if they can fix it.
@@avsaase damn.. good to know at least
Love the size and price point!!! Fantastic
I bought TWO!
nice gotta check it out
I got a couple GP8, ....just ordered a Thumb Cam, should be perfect for my 95x (GP6-Naked was too heavy to have good performance)......Next i need a Blackmagic Pocket 6K lol
So can i power off the camera plug source on my bayang x21 or SymaX8c?
Did they shelve this? Doesn't seem to be releasing in the U.S.
Muy buen video,espectacular
Una pregunta,el video lo has retocado por que se ve genial 👍
Hi, you have test with what quad Bro ?
Has you do post prod ?
Wow still looks good 👍
Could you please find a way to upload several raw videos of the camera with the gyro data? I dont have but i want one and i would like to play with gyroflow and see how it might work, thanks love ypur videos!!
I wish they had a higher bitrate..
question .... what is that chip with the 100 on the top of it? it fell off now i have to hold it down with my fingers to get my camera to turn on. i would like a replacement
I do the 5v wire quick swap thing for my firefly xlite. Except for the tiniest of quads, I'd prefer to go the extra $80 and buy a backup for it. Great review though and this definitely has its place on really small stuff. Do the solar panels on your house help a lot on the power bill?
Drain Man putting it down in freestyle mode 😤
So when the red light blinks the cam is recording?
does the Thumb camera have wifi capability? sorry if you covered that in the video.
Is that Duval or central FL?
Not bad!
Is this camera rechargeable?
thats the pic of the flycolor omnibus f4
hello can you please share me setting?
Why not just use a runcam split lite ? Video better on this one ?
The site says it has a built in gyro doesn't that mean stability control?
It will record gyro data, which will allow the footage to be stabilized via software post flight. For example gyroflow, although apparently it's currently not working with gyroflow, but that should be sorted soon. Unfortunately it will require cropping or zooming for the stabilization software to do its thing, so some loss of resolution. The Insta360 Go 2 and Caddx Peanut, record a larger area so after cropping you still get a reasonable resolution. I'll be curious to see how footage from this looks after stabilization.
I prefer to finger as opposed to thumbing, but that's cool too 🤣 🤣 nice cheap camera can't expect much and if you lose it, not gonna be a big loss
Great
DrainMan FPV what up pilot!? So in your opinion, would you say it is on par or worse than a session4 (superview off) with your use of it so far? If worse (im assuming) are we just splitting hairs or is the difference significant? Thanks for your review and keep it real my dude.
I hate to say it.. because i own one... But to me it looks better than the peanut
Great flying man, love the videos. Not a huge fan of this camera. Every video that I watch of this thing is majorly washed out. It looks like the settings are way over exposed. 11:01 pause there, you can barely see that tree on right because it's so blown out by the sun. 11:19 the sky is just totally whited out! This camera looks like it might only be best used when it's overcast, because when used around the sunlight the videos look the worst from what I've observed...
I wonder how would a ND filter work on this camera
@@luisbertola I am pretty sure that the ND filter was on during the flight
Wooohooo dandahermit
I'm getting one
if gyroflow will work on it ......it's a succes
The Image Quality is Pathetic for a HD camera! Toatlly washed out, no richness in color, bland.
It more looks like those SD/XVGA cameras released by Turnigy/Hobbyking with similar form factor/shape in 2010's than anything close to Caddx Peanut/SMO 4K/Runcam Orange etc !! I mean come ON!! processing and sensors have come long way from 2015's that camera of this size cannot produce videos a cheap chiese Android Phone can produce with similar sized sensor.
If not $220 mark for Peanut/Insta Go, at least make some thing comparable at $100 mark !! $50 is just too much of cutting corners. Runcam Split etc Selling for $60 mark which doubles as live FPV camera feed are still better.
Totally agree. Gyro Flow is not working, quality of the video is mediocre. I'll wait for the version 2 at least.
Cannot agree with you more
@@MontisTube knowing Runcam it will be version 3 or 4. Same company that put out crap year after year. Straight up milking the FPV market. Maybe Caddx or another cloner will do better if this cams popularity rises. I fell into the split cam craze. Not doing that again. I will say it has cool features they just need to up the quality.
@@MontisTube I believe gyro flow is supposed to be fixed before full release, but I certainly wouldn't be jumping on board if you want that functionality. It'll also be cropped for the stabilization to work and unlike the Go 2 or Peanut this doesn't have any extra resolution in the recorded files to maintain a decent resolution after cropping. I'm interested to see what it looks like with gyro flow, but don't think it will compare very favorably at a guess
Dear @DrainMan FPV I've notice a drop in your views and I think I know what's going on TH-cam Unsubbed people from your channel. I seen an updated video of yours on my TH-cam Page went over to yours and noticed I was unsubbed and I know for a act I subbed to you awhile back. Please announce to your viewer/fans to check their subscription!!!
Are you a DJ ?
I can't find its bitrate. That video looks shitty but it has gyro and supports gyroflow
Think it was roughly 20 Mbit from memory from another review.
💖 Promo>SM!!
No definitely getting this product, guaranteed to be upgraded soon to on board stabilisation, save your 50,china do this all the time
bullshit bullshit, 1080, but it seems not bad, especially with stabilization😑
In deed. They more look like SD cameras Hobbyking released in 2010-11