GT Omega Titan Cockpit Review | Logitech G Pro Wheel & Pedals | Cat

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.พ. 2023
  • My thoughts on the tubular direct drive ready Titan cockpit from GT Omega. I discuss the cockpit, the seat, and point out a few titbits here and there. Oh, and there's a cat...
    Please note this video was not sponsored etc, I bought everything myself, and the following are not affiliate links.
    GT Omega Titan:
    www.gtomega.co.uk/products/ti...
    Castors:
    www.amazon.co.uk/dp/B08Y931GJB/
    Feel free to use the discount codes below, and if you choose to use the affiliate links too, that would be very much appreciated.
    15% off Zyber VR accessories with code: ADAMSSIMPORIUM
    Zyber VR store (affiliate link): zybervr.com/?ref=6GHMv07tQB6pAB
    10% off VR Rock lenses with code: ADAMSSIMPORIUM
    VR Rock store (affiliate link): www.vr-rock.com/?ref=ADAMSSIM...
    $20 off Pimax with code: adam20
    Pimax store (affiliate link): pimax.com/?ref=O7UwGH
  • เกม

ความคิดเห็น • 64

  • @AdamsSIMporium
    @AdamsSIMporium  ปีที่แล้ว +3

    11:40 Ghost Orbs confirmed

  • @douglasingram8881
    @douglasingram8881 ปีที่แล้ว +2

    Again, your attention to detail on your videos Adam is clear to see, even your socks are port and starboard aligned. 😂

  • @RalonsoF1
    @RalonsoF1 ปีที่แล้ว +1

    Nice one, Fernando! 😉 Have to think about grabbing one of these soon..🤔 maybe .

  • @fabio6935
    @fabio6935 7 หลายเดือนก่อน +1

    Very lovable cat 😃

  • @Mohammed-tj8nf
    @Mohammed-tj8nf ปีที่แล้ว +1

    I love your channel

  • @supercededman
    @supercededman 6 หลายเดือนก่อน +1

    It's a gorgeous-looking cockpit. I'd ordered an NLR GT Elite (aluminium profile) rig with a bucket non-reclining seat before I'd seen this. To be honest I wish I had waited, but sure I'll be happy.
    One thing you touched on which seems to be a common fault with all reclining seats is the weakness in the reclining mechanism which impacts rigidity. My new rig will have a rigid, non-reclining seat, but if this rig had a fixed seat it would have been my choice.
    BTW, I have a G Pro wheel and pedals, too. Amazing piece of kit 🙂
    Great review.

    • @AdamsSIMporium
      @AdamsSIMporium  6 หลายเดือนก่อน +1

      Thanks :) well I do think an aluminium profile rig is generally better choice. This rig is very good, simple and more importantly very clean looking, but a profile rig allows for customisation.
      The seat is the weak point. The rig itself.is great, but the seat is a weak point. It creaks now too. I have a rigid seat on my main rig, it's so much better. But certainly this rig with a rigid bucket seat, on heavily duty castors like I have added, is the more practical solution for some.

  • @Dorian_Barber
    @Dorian_Barber ปีที่แล้ว +2

    A recent review is helpful. I ordered my Titan.
    Also I found out the Trak Racer R6 keyboard tray fits the Titan. Another TH-camr showed this.

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      Cheers that could be useful indeed when my shifter mount actually gets a shifter, the keyboard will need a new home.

  • @davidcupra4913
    @davidcupra4913 ปีที่แล้ว +1

    Iv just ordered mine. 😊

  • @wwjnz9263
    @wwjnz9263 ปีที่แล้ว

    My dilemma... I have a GTOMega Apex stand, and getting the rear frame and one of their seats will cost me $410 USD. That is uncomfortably close to the Titan cockpit and from the hand full of reviews I watched on TH-cam concerning the full Apex cockpit, I would be better served with getting a different cockpit all together. We are about the same size in height, so seeing you in the Titan really pushes me towards it.
    I'm wondering how much adjustability do you have with the shifter? I currently have a TH8A, but I am planning on getting the Fanatec Shifter. I would need the shifter mount to be a lot higher for the TH8A, and when I get the SQ 1.5, it needs to be lower than a bow legged caterpillar. Would the Titan be able to do this, or should I just go for an aluminum cockpit?

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      Well for the shifter to go really low, you would only need to cut the one vertical piece of square tubing which has the mount plate on top (I am holding it at 10:20). If you cut it shorter, you could lower it further without it hitting the floor

  • @delboy129
    @delboy129 ปีที่แล้ว +1

    Im assuming the issue witn the seat is the same witj all their seats? Was thinking about getting RS9

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      I'd assume so, but a lot of people do love the seats too. Perhaps even less of a problem for lighter people

  • @noobdaddyraces
    @noobdaddyraces 4 หลายเดือนก่อน +1

    Which seat did you get and would any of the other GT omega be better?

    • @AdamsSIMporium
      @AdamsSIMporium  4 หลายเดือนก่อน +1

      Not sure the name of the seat, but I wouldn't recommend a GT Omega seat. I believe they are generally all the same but different size. It's the weak point of the rig. There is way too much flex in the left side, as the adjustment mechanism is only on the right side. You'd be better off with a rigid seat, real car seat, or the new Next Level Racing seat has the adjustment mechanism in both sides. So the Titan is great, I'd just look elsewhere for the seat.

  • @jbeeches1
    @jbeeches1 5 หลายเดือนก่อน +1

    Hi looking to get a titan on ebay with no seat .If i get a new seat from gt omega would in have all the sliding rails to bolt straght on to the frame ? cheers james

    • @AdamsSIMporium
      @AdamsSIMporium  5 หลายเดือนก่อน

      I would assume yes, that the rails come with the seat not the frame, but I bought it all together so I can't be sure. Best to ask GT Omega or maybe find a video of only seat or frame. That said, I wouldn't recommend the seat. The Titan frame is awesome, totally recommend that, but the seat is not very solid, too much flex from the side without the adjustment mechanism, and mine creaks now. Unless you really need a seat with adjustable back, I'd go with a solid bucket seat, or even just get a real car seat from a breakers yard or something.

    • @tdmdchannel2339
      @tdmdchannel2339 5 หลายเดือนก่อน +1

      Make sure you don't confused those Marada (Hottoby) Tube Cockpit selling on ebay with the GT Omega Titan. They look similar at first look but they are different in rigidity & construction.

  • @Mitchlett
    @Mitchlett ปีที่แล้ว +1

    I just finished putting mine together, feels great. One thing I noticed is that my seat only slides like 1 to 2 inches. I'm wondering if that's normal or if maybe there are some bolts colliding preventing the runners from moving.

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +2

      Mine definitely slides more than that

    • @Mitchlett
      @Mitchlett ปีที่แล้ว +1

      @Adam's SimPorium I realized my mistake. I fed the bolts from the bottom of the square frame bit up through the runners on the bottom of the seat, so the nuts were stopping the chair from sliding forward and back. I just took it apart and fed the bolts in from the top of the runners and now the chair slides back and forth perfectly. I think the instructions could be a bit more clear. Thanks for the reply.

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      @@Mitchlett glad u sorted it, and yeah the instructions are pretty much the bare minimum lol

  • @mattyman
    @mattyman ปีที่แล้ว +1

    Great video. I’ve got a 146cm long space to put it under my stairs. Does the seat slide far enough forward that it is in line with the rear of the rig? I’m concerned the overhang you mention at the rear will push me past the amount of space I’ve got. Cheers

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      Thanks, I will check later on and let you know. If you don't get another reply from me within next 8 hours max, send me a reply to remind me!

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      Just tried it and yes the seat goes in quite a bit further than the rear of the rig. With my seat back at the usual angle, the very top was in line with the rear of the rig. This can obviously angled in more to take up less room storing it.
      If you plan to use it under you stairs though, unless your very very small, there's no room to actually sit in the rig and use it with the seat so far forward. Not for me and my wheel anyway, and I can't imagine anyone could.
      If you had the back directly vertical, the seat could go back some and still be in line, but not sure if that would be a good fit or comfy for you.

    • @mattyman
      @mattyman ปีที่แล้ว

      @@AdamsSIMporium Thanks for getting back to me on this, I really appreciate it. It’s not to use under the stairs, it’s just somewhere that I can hide it when not in use. I was going to put it on casters and then I can roll it away out of sight! Cheers

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      @@mattyman That would of been a good point to cover in the review really. Here is a pic with the seat forward and upright to show how much less space it takes... ibb.co/YQnYg8T

    • @mattyman
      @mattyman ปีที่แล้ว

      @@AdamsSIMporium perfect. Now just to wait for it to come back in to stock! Thank you!

  • @ricardoa1661
    @ricardoa1661 5 หลายเดือนก่อน +1

    no cat in the box ?? im not buying ! do you find the frame loud when ffb hits ? i game late night and dont want noise to travel to other apartments . i have a thinner version of the titan and kind of rattles ? i am using a moza R5

    • @AdamsSIMporium
      @AdamsSIMporium  5 หลายเดือนก่อน +1

      Lol. I don't find it loud at all, but then again I'm used to my motion seat in main rig which is very loud! You should be good with it, it's chonky!

  • @dove187
    @dove187 7 หลายเดือนก่อน +1

    Can you just install a real seat like a Toyota Celics gts seat with its own rails?

    • @AdamsSIMporium
      @AdamsSIMporium  7 หลายเดือนก่อน +1

      Sure, and would certainly be a much better seat. The seat is the only weak point in this rig really.

  • @jesusg853
    @jesusg853 ปีที่แล้ว +1

    Does this work with the Logitech g29? Will be upgrading to the pro wheel in a few weeks

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      Yes it has 3 holes ready to bolt on the g29

    • @jesusg853
      @jesusg853 ปีที่แล้ว +1

      @@AdamsSIMporium nice will definitely pull the trigger on this then. Thanks for the quick response

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      @@jesusg853 No problem, enjoy!

  • @shieldslfc
    @shieldslfc 3 หลายเดือนก่อน +1

    The link for the castor wheels is only for 4, I see you have 6 fitted?

    • @AdamsSIMporium
      @AdamsSIMporium  3 หลายเดือนก่อน

      Indeed, I bought 2 sets, so I have a couple of spares laying around somewhere.

    • @shieldslfc
      @shieldslfc 3 หลายเดือนก่อน +1

      oh ok thanks for replying, are the holes on the rig 6mm or 8mm? My Titan on the way, but i will need castors on it straight away so want to order in advance, cheers

    • @AdamsSIMporium
      @AdamsSIMporium  3 หลายเดือนก่อน +1

      @@shieldslfc The ones I ordered and fitted are M8.

  • @Paul-if1jq
    @Paul-if1jq 11 หลายเดือนก่อน +1

    What is the total length with seat and pedals ?

    • @AdamsSIMporium
      @AdamsSIMporium  11 หลายเดือนก่อน +1

      For me (5'10") with the G Pro pedals and that seat, it's 150cm from the very tip of the pedals to the tip of the headrest, measuring along the floor. Of course other pedals may stick out less, and when not in use you can slide the seat forward and/or angle the back forward.

    • @Paul-if1jq
      @Paul-if1jq 11 หลายเดือนก่อน

      Thanks @@AdamsSIMporium

  • @spaceandsky1829
    @spaceandsky1829 29 วันที่ผ่านมา

    the link for the castor is only for a set of 4 shouldn't it have 6?

    • @AdamsSIMporium
      @AdamsSIMporium  29 วันที่ผ่านมา

      Hi, unfortunately yes, however as I am selling my Titan rig (I don't need to keep two rigs lol) I can sell you the 6 you need if you're interested. How about £30 including shipping (48 hour tracked), via PayPal? Saves you a bit over £10 anyway. If your interested, contact me on Discord... discord.gg/yCG57WxP

  • @kaki-8888
    @kaki-8888 ปีที่แล้ว +1

    Adam, I am sorry to ask a total noob question here, but I want to know if the GT Omega Titan Cockpit includes a Wheel and Pedals? Lastly, is the seat adjustable forward and backward? (sliding)

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +2

      Hi, no it doesn't include a wheel or pedals, but yes the seat can slide back and forward.

    • @kaki-8888
      @kaki-8888 ปีที่แล้ว +1

      @@AdamsSIMporium THANK YOU VERY MUCH!

  • @grahamkelly8662
    @grahamkelly8662 ปีที่แล้ว

    Hello Adam. I’m thinking of buying the Logitech wheel and pedals, in this video. Would you say they are worth the £1350? I really wanted to go fanatec but I hear nightmare stories about customer service and Logitech will be much easier. Have you buy any chance owned a Logitech g29? If so, how does it compare to the wheel in this video?

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      Hi, I have owned a g29 and my Bro still does. They do not compare at all! The g29 is a great wheel, but incomparison it's a toy. The Pro wheel is a serious bit of kit, as are the pedals. Is it worth £1350, well I guess it depends what else you can get for that, but it is a real nice bit of kit. People complain the wheel base ahs plastic housing, but it's high quality and I've not thought twice about that. Basically I'd say it's definitely one to consider. It's a shame there is no news on more rims yet, and no shifter unless you but the usual old Logitech one and a £40 adapter. I have and wouldn't recommend it but wait until if/when they release a pro shifter too.

    • @grahamkelly8662
      @grahamkelly8662 ปีที่แล้ว

      @@AdamsSIMporium I’m on Ps5 so not much option for me. If I order directly from Logitech, will it ship from U.K.? Still no other wheel base available? Are there even any coming? I don’t mind waiting for gear shifter but could it be a long wait for more wheels?

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว +1

      @@grahamkelly8662 Mine came from UK, was fast delivery. No idea about other wheels yet, not seen anything. That said, the one wheel is very good and a nice size for everything.

    • @grahamkelly8662
      @grahamkelly8662 ปีที่แล้ว

      @@AdamsSIMporium ah sweet. I may order in near future. I not totally sold on this wheel, especially the look of the wheel BUT it ships from U.K., delivery will be really fast, probably about same cost as Fanatec, considering I’d have to pay I guess £150 plus on shipping and import fees, alone from Fanatec. So this Logitech wheel may actually work out a tiny bit cheaper then Fanatec. I mean, I’m sure you’re right in saying the comparison between g29 and Logitech direct drive , is night and day so I guess once I actually use it for first time, I’m sure I’ll be very happy. I guess sim wheels work much like DJ turntables? When I was a teen, in late 90’s, my parents bought me a starter DJ set and they was belt drive. Fine for beginners but not great. I moved on to technics 1210 first drive and you can really feel the difference. When you drop the beat on belt drive, it’s slow and you kinda need to almost drag the record. Not so with direct. I deff have the feeling of dragging my g29 wheel, rather then properly turning it. I think I’ll just forget about Fanatec. Looks super cool and premium but Logitech route will be so much easier and stress free.

    • @AdamsSIMporium
      @AdamsSIMporium  ปีที่แล้ว

      @@grahamkelly8662 Lol well the long and short of it is you can overpower a g29, whereas a direct drive wheel has potential to hurt you! It's not all about the strength though, but everything stems from that really.

  • @RalonsoF1
    @RalonsoF1 ปีที่แล้ว +1

    Honestly your sweety cat is quite distracting! 🥰👍