Thanks, great video! Did this on my Camaro this morning. Under 40 minutes from the time I decided to start until everything was cleaned up & put away. My iPhone X charged with & without the case.
Thank you for posting this! Installed mine with ease and took 45 mins. The console was a nightmare to get back down without ripping leather back seats… only bad part…. Everything else was great.
I can’t thank you enough for this. 45 minutes start to finish. The only slight hiccup was getting the console back into place, but as you recommended, going slow did the trick. Thank you so much!
Awesome vid. Made the process very simple. Took about 35 min just because I was running out of good daylight. Got my unit on sale for $60+shipping. Search, deals are out there.
Just did this in my 2016 2SS convertible and it was much quicker and easier than I was expecting. Start to finish took less than 30 minutes. I put the top down and stood up the the back, one leg on each side of the arm rest, to pull it up and push it back into place. Works great with my iPhone XS with Otterbox case. I highly recommend this inexpensive upgrade to anyone with one of the original 6th Gen wireless charging pads.
Hey thanks for the video. This is really easy after watching your video. Mentioning the socket size and torx size saves lots of time too so you can just grab what you need.
the rear seat pops out no tools. might make it easier. 1. Take off the back seat top, I let the seat down to like a 45 degree angle and pulled one side up, then you can take the other side off. If you open the seat top up, you can see the hinges are open on top. 2. Then I lifted the back seat bottom from the back, I did not have to pull hard and it came right off.
I'm assuming this is for manual center console correct? I don't see myself being able to lift the console on the automatic this easily without removing the shift knob
I DROPPED CHANGE IN THE CRACK BELOW THE AIR VENTS BEHIND THE SHIFTER... i am assuming to get to it i need to follow the directions to lift the center console, thanks for the video will attempt this tonight lmao
From what I’ve read you need more than just the charging unit. You need the harness and some adapter for the back of the radio, as well as a new center console. I’d recommend just getting a charging pad you can plug into one of the USB ports.
I have a 2017 Camaro SS2, I just bought a new Iphone10xs with the expectation that I could charge it in my care with the wireless charger. My phone will not fit and I can't seem to get it to charge. my concern, is that even if I make this equipment update, will it charge my phone? Can you help?
Per notes release if the phone does not fit the dimensions or in case of phone protection equipment i.e. hard cases etc, then the phones may not charge. my.chevrolet.com/content/dam/gmownercenter/gmna/static/pageImages/learnAbout/articles/documents/GM_Wireless_Charging_Compatible_Device.pdf
I have an iPhone Xs Max and a very thin flexible case. If I rest the top end(camera) part of the phone toward the passenger side it does charge and typically stays in place with leisurely driving but a thicker case and it won’t work. It was designed for phones the size of the regular iPhone X or 8. I heard the new 2019 Chevy Blazers charging pad will fit the plus size phones.
No worries, I shoulda checked the compatibility guide for the old unit first.... my.chevrolet.com/content/dam/gmownercenter/gmna/static/pageImages/learnAbout/articles/documents/GM_Wireless_Charging_Compatible_Device.pdf
It should charge your note 9, but It won’t fit on the pad is my guess. My iPhone Xs Max will slide off sometimes if I corner hard. It was designed for Galaxy 7 and iPhone 6 sized phones. Not the big boys.
This didn't work for me, anyhow I haven't been able to lift the console on the 6 Gen automatic. But I found another solution: I removed the bottom part of the back seat (th-cam.com/video/l1RvKM6y5zY/w-d-xo.html) then I was able to just pull out the console part with the Qi module 👍🏻😎 Now everything is fine and I can easily charge my new Samsung Galaxy Z Flip 3 5G 🕺🏻🙌🏼
Thanks, great video! Did this on my Camaro this morning. Under 40 minutes from the time I decided to start until everything was cleaned up & put away. My iPhone X charged with & without the case.
Awesome! Glad the video helped. I'll be getting one of the new iPhones next month, so looking forward to being able to charge wirelessly.
Thank you for posting this! Installed mine with ease and took 45 mins. The console was a nightmare to get back down without ripping leather back seats… only bad part…. Everything else was great.
I can’t thank you enough for this. 45 minutes start to finish. The only slight hiccup was getting the console back into place, but as you recommended, going slow did the trick. Thank you so much!
Awesome vid. Made the process very simple. Took about 35 min just because I was running out of good daylight. Got my unit on sale for $60+shipping. Search, deals are out there.
Just did this in my 2016 2SS convertible and it was much quicker and easier than I was expecting. Start to finish took less than 30 minutes. I put the top down and stood up the the back, one leg on each side of the arm rest, to pull it up and push it back into place. Works great with my iPhone XS with Otterbox case. I highly recommend this inexpensive upgrade to anyone with one of the original 6th Gen wireless charging pads.
Awesome!
Hey thanks for the video. This is really easy after watching your video. Mentioning the socket size and torx size saves lots of time too so you can just grab what you need.
Great video and thanks. Took me about 25 minutes to install.
You are heaven sent!!!! Thanks so MUCH!
Very cool! I would slide a towel or cloth in between the seat and console so it doesn't scratch anything. Looks like you did it the hard way.
Great,sharp video. Very informative. Many,many,many thanks!
the rear seat pops out no tools. might make it easier. 1. Take off the back seat top, I let the seat down to like a 45 degree angle and pulled one side up, then you can take the other side off. If you open the seat top up, you can see the hinges are open on top.
2. Then I lifted the back seat bottom from the back, I did not have to pull hard and it came right off.
can you make a video on the impala?
where you can buy
Same part works in Sierra / Silverado too
Can I get into the usb/aux port for appleplay this way? Need to replace mine
I would think yes, you’ll have access underneath
Do you know when it was updated? '17 or '18
Will this charge a iphone XR ? Or what i have to do to charge the XR ?
What if it is partially working? If I plug in a tire inflator, it won't work. If I plug in a phone charger, it works.
i want to remove this useless pad and replace it with the storage, is it possible?
Sure, you need a console from a non 2SS or an LT car.
Thx
I have the new one, weather is nice
Ok, lets try how much damage i will do 😅
I am doing the same. I'd rather have the storage space than some awkward and low power pad that doesn't even fit the length of any phone made in 2017+
@@MMonster-x5h heads up, the storage box actually doesn't fit the length of a normal phone either
I'm assuming this is for manual center console correct? I don't see myself being able to lift the console on the automatic this easily without removing the shift knob
Hey just wanna tell you that I had the same problem with my 6 Gen automatic ☝🏼 But I solved it ..see my comment above 😎
Will this GM part work with the new Iphone 11 pro ?
I DROPPED CHANGE IN THE CRACK BELOW THE AIR VENTS BEHIND THE SHIFTER... i am assuming to get to it i need to follow the directions to lift the center console, thanks for the video will attempt this tonight lmao
Any idea if this works on the newer iPhones like 12
Yes it does
Can you install this on a 2017 Camaro that wasn’t equipped with a wireless charger to begin with?
From what I’ve read you need more than just the charging unit. You need the harness and some adapter for the back of the radio, as well as a new center console. I’d recommend just getting a charging pad you can plug into one of the USB ports.
Would this work with the galaxy s9+?
I have a 2017 Camaro SS2, I just bought a new Iphone10xs with the expectation that I could charge it in my care with the wireless charger. My phone will not fit and I can't seem to get it to charge. my concern, is that even if I make this equipment update, will it charge my phone? Can you help?
Per notes release if the phone does not fit the dimensions or in case of phone protection equipment i.e. hard cases etc, then the phones may not charge.
my.chevrolet.com/content/dam/gmownercenter/gmna/static/pageImages/learnAbout/articles/documents/GM_Wireless_Charging_Compatible_Device.pdf
I have an iPhone Xs Max and a very thin flexible case. If I rest the top end(camera) part of the phone toward the passenger side it does charge and typically stays in place with leisurely driving but a thicker case and it won’t work. It was designed for phones the size of the regular iPhone X or 8. I heard the new 2019 Chevy Blazers charging pad will fit the plus size phones.
So a galaxy S9+ is considered a older Android phone? It works with current Android phones. Might want to avoid spreading misinformation.
Thanks Chris, I updated it to say “most” Android phones.
ringnjc wasn't trying to be critical. Thanks for posting this video helping people to get the newer iPhones working.
No worries, I shoulda checked the compatibility guide for the old unit first....
my.chevrolet.com/content/dam/gmownercenter/gmna/static/pageImages/learnAbout/articles/documents/GM_Wireless_Charging_Compatible_Device.pdf
Does this work for the note9?
It should charge your note 9, but It won’t fit on the pad is my guess. My iPhone Xs Max will slide off sometimes if I corner hard. It was designed for Galaxy 7 and iPhone 6 sized phones. Not the big boys.
Will it work in 2018 ???
2018 models should have the updated charger. If not yes this will work on 2018’s
This didn't work for me, anyhow I haven't been able to lift the console on the 6 Gen automatic. But I found another solution: I removed the bottom part of the back seat (th-cam.com/video/l1RvKM6y5zY/w-d-xo.html) then I was able to just pull out the console part with the Qi module 👍🏻😎 Now everything is fine and I can easily charge my new Samsung Galaxy Z Flip 3 5G 🕺🏻🙌🏼