ฝัง
- เผยแพร่เมื่อ 3 พ.ย. 2018
- - Follow me on Twitter: / voultar
- Store Website: voultar.com
- Be sure to like & subscribe if you're down with my warez!
- I used this programmer(affiliate) for writing the EEPROMs amzn.to/2JDB3Hd
In this installment, I demonstrate my own techniques of converting Famicom Cartridges to English. All information given is applicable to any NES Reproduction that uses a donor ROM board.
CREDITS & LINKS:
JohnRiggs - • Video
Captain Saver - • Chronicle of the Radia...
Radia Senki OST - • Nes Radia Senki Soundt...
NesDev - wiki.nesdev.com/w/index.php/M... - เกม
Man. I never thought about routing the wires under the chip itself. Absolutely wonderful job on always making your work function as well as look great 👏👏
It looked like you bridged the legs on the chip next to the battery when you were soldering
am I the only one who noticed the pins were shorting out with the access decoder/square chip?
They are supposed to be bridged.
Go to options -> language -> english
West Senkovec Old games don’t have options like that!
@@donkeykongisytpooping3002 r/woooosh
박수민 You’re a day late!
@@donkeykongisytpooping3002 HaHa
박수민 now your laughing two days late
If you taught electrical engineering classes I would change my major immediately. Absolutely fantastic.
It's like if Bob Ross was a Nintendo geek.
'just like butter' seems very Bob Ross
lul
Entirely made my day :D
We don't make mistakes, just happy accidents, especially when you broke the cartridge.
Bob Ross is the Voultar of painting.
Dude I totally ruined my copy of Neo Turf Masters for Neo Geo by desoldering the PROMS and putting them on a Genesis board. I mean both the Genesis and Neo Geo have a 68000 and z80 so it should work, but using this video as a guide all I did was melt my Neo Turf Masters. I demand a refund!
YOU MANIAC!!!
It worked for me, I soldered my Thrash Rally PROMs to a my ZX Spectrum and now I have Sinclair C5 that plays Goofy's Hysterical History Tour.
You're a sick bastard, Joe.
...Meet me at the hotel again, tonight...
I think the gravity of that joke was lost by a lot of people. LOL
You are gonna socket your chips, right? RIGHT?
He didn't socket them, noooooooooooooooloo
That desoldering tool is magical.
For real I feel like a caveman using wick.
Magic costs $$$
I have a desoldering pump like that from Harbor Freight, cost practically nothing and works great. It has a spring loaded pump that absolutely sucks everything up, not one of those bulb things.
No, it sucks.
"Any sufficiently advanced technology is indistinguishable from magic" :D
Man, that was so nice to watch. Thanks for sharing this with us!
Man, that was some Slick work you did! So clean. 😎
Good shit, Voultar.. I hope to see more vids like this!
Certainly clean and professional as f***. Impressive work. The rewiring under the chip was fantastic. Congratulations on such amazing job!
That's some fine-ass workmanship there, Miriam! Keep it up!
You gotta desolder the battery first even if it is dead. Those components magic smoke was discontinued years ago!
Great vid with great tips and love that you chose a game that is not as known instead of the more talked about “hidden gems”
I had no idea David Hayter could solder!
Nice Video as always, I love watching them!
Quality work, and thanks for introducing me to Radia Senki. I'm a huge fan of all three titles in question, but had never heard of it!
Thanks for watching!
Me too, never heard of this jewel. Thanks, excellent video.
Best wiring I have ever seen on a repro/translation cart. Also thanks for the suggestion for another famicom game I have never heard about before. It looks pretty awesome. I swear there will be good famicom games I will keep finding out about for the rest of my life. It seems like an endless library.
Wow great video as always. Your work is a piece of art!
I actually played this game recently, it was awesome. I admire your channel, wisdom and knowledge of how you do all the complex things with soldiering and Abel to manipulate the way software and hardware is and can be if done so. Subbed to the channel bro Peace and love
Dude that was so satisfying to watch!
Great tutorial, but there's one thing you may want to mention: due to the tightness of adding the wires to the bottom of the chips, it's a good idea to make sure you double check the positioning of the wires before pushing the chip all the way in. There's always the possibility of the chip pins accidentally slicing a wire and causing a bridge. It might be slim, but I'm sure someone, somewhere, has done it before.
This video absolutely saved my life. You are are a Saint, Lord Voultar!!
man your wire routing job is something that ppl need to copy. every video is a joy just to watch how your hide/route the wires.
Man gotta love that clean soldering and way to order the cables.
You are a wizard, holy crap that is some of the cleanest wiring jobs i've seen in my life.
Cheers for putting this up I’ve just had a crack at this & was successful! Great game so far :)
This is amazing to watch and learn. Thank you.
I've been binge watching your videos, great content!
That was a really clean job remapping the pins. Good on ya!
Beautiful technique! I kept seeing two bridged solder joints on the surface mount chip after you did the battery and was expecting magic smoke when you tested it! Thankfully after rewinding I realized they are supposed to be bridged. Phew!
Excellent workmanship.
I have no experience in electrical engineering, but this video was cool to watch anyways. It's kinda rough going around watching homemade videos that explain things as if I know everything already, but thankfully you make things pretty clear.
There is some good information in here. Thanks for the upload.
Aside from that solder bridge in the MMC3 legs (and in CHR-ROM legs too), very professional and clear presentation! Nice music as well.
Trimming those EEPROM legs seems horrible in case you ever want to reprogram it.
I have never seen this game before. Seems interesting.
But I didn't bridge the MMC3 legs. Those two traces are connected to a supply fill on the PCB..
Didn't expect to see Bisqwit in these parts. Hi!
Such nice quality work great job
This video was OUTSTANDING man thanks so much I learned a ton :)
Your work is always beautiful Buddy.
It's the cable management GOD
So sad you are retired with the repair service but good to see you still uploading videos . Thanks again Voultar :)
Great video as always. this should be a series. very informative. A video about "stacking" or "pigback" on SNES/MVS would be great. Keep 'em coming.
"I like to be tugged at night...Don't tell my ex-wife that."
Fukkin subbed right there. This man's humor is impeccable.
Ahahahaha fkin brilliance
Loved the video! Hope to see one about Super Famicom carts too in the future... so much good stuff that's japanese exclusive!
It's like watching a surgeon doing his best work. Thanks for the video.
Such dedication to just one game. You really must like it
Welcome back Voultar :)
I'm sure people will.
clean job voultar !
I feel like I just watched a special on PBS
You have a great voice for narrating! The introduction to this video was great.
Thank you, Erin!
Quite a horrific voice for narrating.
Except for these terrible forced low frequency "Let's dooo thaaat"
The first thing I thought when I heard him speak! Liked the Snake voice too! :)
Finally a New Video...Great one I might add...
God damn Voultar of latter day saints . you always make great videos. thank you for the tutorials
Since you changed the battery holder. Why not do the electrolytic caps while you're at it?
It ain't broke man....
You have the voice of a family doctor. So pleasant
I hadn't realized before that not only is Voultar a knowledgeable chap, but he is also incredibly well manicured.
Keen to see the contents of Bob's AA Sponsor IPS patch. I'm guessing no isopropyl alcohol allowed near that board after applying?
Evidently I was hammered myself whilst naming that folder. "Sponser"?? LOL
really awesome work thanks for sharing
This is some very clean wiring. And nice mention of Crystalis, that game doesn't get enough love.
very clean job-good steady fingers-very interesting. thnx fr sharing.
Superb work. At least you put it up on TH-cam for others to enjoy. I don't think there's a reasonable way to do this job for players and have them appreciate it.
Awesome vid mr. voultar
I used a small screwdriver to enlarge the through holes for the battery holder when I replaced my batteries. I use the same holder as you and found I could put them flush against the pcb once I could fit the leads through the holes (which I bent out with some pliers). I did that mainly because I was learning to solder at the time and didn't even think of doing it surface mounted style. Some holders I had to carve a bit of plastic off of because other components were crowding it.
Thank you so much for this video. I am a huge RPG fan especially retro games, and I never knew about this game. I live in Japan so my goal now is to find the original cartridge of this. Subscribed to your channel.
The easiest translations to attempt are lagrange point, esper dream 2 and madara. All 3 are superb rpgs with amazing audio and are direct swaps for the chip/s. Def worth attempting if you haven't already and are super cheap to pick up. Thanks for this video voultar!
Is there not enough room inside the cartridge to do the destructive modifications to a couple of low-profile sockets instead of the PROMs themselves? You would be able to easily remove and replace the undamaged PROMs and perform additional patching easily, no (de)soldering required afterwards.
man.... what a clean solder!!!! awesome
I was dominating Genesis repros since I taught myself last year, dabbled in a few SNES 1MB n unders, but have yet to do a NES/fami! I think its time, and luckily I found this vid...as usual, flawless execution and explanations from Lord V...Master Class is in session boys. Best I do is run my patched games on emulator (or PCE/SNES games through Everdrives), but nothing quite beats having the actual authentic cartridge and board.
It was weird hearing my name starting at about 23:22. Your desoldering and soldering skills are second to none.
This tutorial helped a lot! Thank you! I got one comment: Just so you know, If you can put it into an NES Cartridge shell (You'll need the Famicom adapter from Gyromite), you can play it on an NES!
pure art, thank you.
Awesome video!!! Do you have any links to the eeproms used? Or the eeprom programmer you use? Thanks!
Check the video description!
nice clean work
If you used an IC socket to make the appropriate connection changes soldered it and lifted pins like the actual EEPROM you could effectively leave the EEPROM unmodified and have a chip adapter
Outstanding. Love u dude
Also, this is some next level shit. As a layperson I never in a million years expected that burning insulation off a wire could be a good thing.
Where did you learn how to reroute eeprom pins like that? I would have just been one of the dudes who sent the leads around the pcb instead of straight through.
It's something I put together back in 2014 or so. I made a tutorial for this method on TheISOZone back in the day. When not filming, it's actually faster to prep the EEPROM like this than manipulating the cartridge PCB and rerouting things directly ont it.
I've never seen this exact approach before. Very clever. Thumbsup. Had you considered using an intermediate low profile socket method so you can remove and reprogram your EEPROMS? How about custom PCBs? Very cool thanks!
@@djmips I _want_ to say this is possible, but something inside me thinks the socket might not fit with the ROM. I am really hoping this isn't the case because I would rather modify a DIP holder than the chip itself. This looks like a way to keep other people from modding your work, or at least modding it easily because now when you ram the pins into whatever holder you use, you also need to stuff the wires in _as if they were pins_ and hope contact is made.
@@djmips Just to prove your point, and for you to attempt, buy a couple of these and give it a shot: www.jameco.com/z/32SLPD-Socket-IC-32-Pin-Low-Profile-Dual-Wipe-0-03-Inch-Width_137621.html
Don't even wire it up or apply solder, just see if it fits first.
Also @volutar I WANT A SOCKET FOLLOW-UP.
@@bluephreakr I think these are even lower profile; not designed for same pins but they do work. Might still not be low enough.
www.jameco.com/z/ICM-632-1-GT-Adam-Technologies-32-Pin-Machine-Tooled-Low-Profile-IC-Socket-0-6-Inch-Wide_105381.html
Your explanations are straight ASMR for my ear holes
you are my god when it comes to soldering keep and don't stop making videos please
Hey! Glad to see the diagram from my site is still being used. I think your final product looks great but I think it's very risky for beginners once the wires are trapped under the newly soldered chip.
Yeah, I saw how he was heating the rubber coating to strip the ends of those wires and thought to myself " hmmm, there's also rubber wire coating touching other pins that he is going to be soldering into the holes, what if the heat on one of those pins also melts some rubber that isn't supposed to be melted making an unwanted connection??" 🤔 I would totally screw that up.
Nice work Voultar....but it's a bit labor intensive for me! I think I would of built a sister board for the chips or a modified pcb board clone with the proper pins for the newer chips
The chisel tip is my go to on my soldering station. What solder sucker do you use. I want to get one but there’s so many different kinds.
Thanks awesome channel. And your work is very clean and done proper.
I'm not sure whether there is this new TH-cam reccomendation system, but I've been getting a lot of unique hobbyists in my reccomended feed and I love it.
It's cool to see people are going through the effort to legally patch things onto cartridges and play it on original hardware.
I just illegally download a copy of games I already have then patch them to whatever hack I want to play.
Awesome video. Trying it myself with a copy of ganbare goemon 2 for famicom. I’m a layman so a lot of the technical aspects of over my head, but I’ve got an eprom reprogrammer and the soldering skills to make this happen. The thing is, the inside of my cart doesn’t look the same as yours.
I can’t tell which is the prog and which is the char chip? Also, my chips have 14 prongs per side as opposed to what I see in your vid, so I’m not sure how to apply your rewiring scheme to my cartridge? I’d really appreciate any advice you can offer, or at least a link to some resources to learn more about how to figure this out myself? Thanks
Awesome video! I’m probably gonna do this on the first 3 Final Fantasy games, as I only have a famicom, and the second and third were only released in Japan on the famicom/nes.
Might also see if I can apply some of this to a copy of Pokémon Gold I have with dead chips.
Great work, by the way!
Fantastic video, as usual (Especially about the wiring tips, makes the cardridge feel still legit) !
However, this is definitely something I wouldn't be prepared to do (unless having the right tools), as those Famicom cardridges are really fragile...
I have one question about those low-profile battery holders though... Is there one kind of battery holder that you'd recommand ? And, would it also work for a SNES cardridge ?
That's a HARWIN 2032 Button Cell Holder Manufacturer Part No: S8421-45R
Thank you very much!
Excellent work indeed....👍👍👍👍
Awesome video and amazingly clean job.
Can this level of repro be done to a GBA cart? I’m thinking specifically of Boktai 3, to have it in English and using the actual solar sensor.
Great video. I have quite a few Famicom games were the battery should be changed. What model of battery holder did you
use ? All the ones I have seen were to high.
Dont worry....Hard part is over...proceds to use specialised soldering tools...
I wanted to see what was different about your translation patch...
Some dialogue differences, and I altered the title screen.
I love watching Voultar do ellipses with his conical tip!
Voltar You can use these battery holders as THT parts if You bend the contacts straight down. It is a direct fit.
Never thought about running the wires under the chip like that, think I'll try it the next time a make one
2 minutes in and this is already amazing
Voultar is taking us to church and teaching us his sacred techniques! Praise be! Praise be!
He should be passing out a collection plates....
Nice tip !! I was thinking that you could probably 3d print a guide plate to fit onto the vice grip so that the face of the cart always lines up where you want it. This way You don't have to fight to get it where you need it. Just an idea.
I like soldering, I would enjoy working on these all day. I just don't have money to invest in it. But it is the type of work I would be proud of. Great job :)
This is really impressive and clean. I've watched quite a few of your vids, and this one in particular blew my mind. Seen it done, but never this clean.
One question, though. Why not cut the wires on the thru hole part a little longer so you have room to strip it, then trim the excess once the chip is in place and soldered? It seems a little less risky that way. Just an idea.
6:06 what kind of desoldering wizardry is that
Vacuum desoldering gun.
opening works great, thanks
I will just avoid all this and learn Japanese.
Hah! Good luck with that!
That's funny, because old Famicom games don't even display the Kanji characters, it displays only Hiragana.
@SuperSpyMario I agree with you! I also think that this is useful though
Yes. Learn Japanese ad keep your famicom 100% legit for the value.
Have fun with that i have been trying to learn Japanese for over 20 years