CDR2 Rollergun Step by Step Installation.
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Step by Step instruction on installing a CDR2 rollergun muzzle.
0:00 Introduction CDR2 roller gun installation
0:21 Tools you will need.
1:01 Step 1 - Insert muzzle
3:11 Step 2 - Drilling holes and securing the line guide
8:09 Step 3 - Attaching the Rob Allen Speargun handle
11:54 Step 4 - Timing rollergun rubbers.
14:43 Step 5 - Grinding Rubbers
15:21 Step 6 attaching the rubbers
▼
Here is the newest version of the Coatesman Double Roller:
coatesmans.com/shop/
▼
Specialised safari concepts for the exceptional spearfisherman.
➜ coatesmans.com/
▼
Like my Spearfishing channel? Subscribe!
➜ bit.ly/28KNRKj
▼
Want to email me a spearing question?
➜ saltydiver@gmail.com
▼
In case you'd like to reach me...
➜ instagram : / coatesmans
➜ facebook : / coatesman - กีฬา
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
Another awesome, simple and informative video! 👍
Greetings from Shetland Islands (from the other end) from a Hungarian spero! 🤙
Great tutorial Chris!
Well done Chris good stuff! Dive Safe!
Hey Chris - what a brilliant video!! thanks so much for sharing. The shot over shoulder showing the tie up on the rubber was pinpoint brilliant! Like the others , it would be awesome to see this amazing gun in action in the pool ~ all the best.
Hey Bretto
Pool videos coming soon ... I hope. I am having to build a pool to do gun tests in. So watch this space.
Sensacional, mto bom, perfeito... com certeza vai melhorar mto a performance do equipamento...vlw...abçs...
What is the name and size of that little tiny insert I'm paranoid I may lose it switching barrels then be screwed. Great tutorial btw, thanks.
Great great video pls also set it up with reel plus how to shoot it with line raps with some examples of firing it in water!!!!!
Good idea, thank you
These videos are great. Would you be able to recommend a spear/rubber configuration for a RA 1200 single roller?
Hey Eat what you Kill,
Have a look at this video:
th-cam.com/video/Rrzm-Mf17MY/w-d-xo.html
Amazing tutorial Chris, clear Instructions . I have now the courage for cutting, drilling and setup my RA / CDR2 130 carbon roller project. Thanks
A questions regarding the silicone paste, is this normal sealing silicone or a kind of a grease silicone ? Thanks 👍👍👍
Glad the video is helpful.
The Silicone grease / paste is the same as the O ring grease for camera housings. This is not the glue one that sets that you use in the bathroom and boat.
@@CoatesmansSpearfishing thanks for for your replying Chris. I have o-ring silicone in my dive bag 😀 from now on, no more excuses. Wish you good and safe dives. 🤙🤙🤙
I dream i want to speargun like that ❤️😢
Hi Chris. My mate and I have just received your cdr muzzles in the mail. They look good. Thank you. We have Rob Allen sparid barrels and the roller head is quite loose in the barrel. What do suggest to firm it up? Glue or silicone? Thanks.
Hi Louey,
The best is to shim the spigot with a thin sheet of plastic. just cut to fit until the muzzle is snug and has no movement. Drop me a mail if you are still having issues 🤙
Have you got any advice for setting up a double roller? I’m putting together a 120 double with 8mm spear and can’t find hardly anything on the net on how much of what size rubber to start with
drop me an email saltydiver@gmail.com
Great tutorial. Is it safe to install a double roller on a 120 aluminum rob Allen barrel?
Hey Adam, yes absolutly the RA ali barrels are very strong. And the roller shares the load on both sides of the barrels so there is actually less pressure on one side than a conventional gun.
Do you need silicone grease on the muzzle and handle spigots?
In my experience it either goes in or it doesn't. Good tip is putting the muzzle in thre freezer so it shrinks with the cold then it will go in easy.
Couldnt get silicon paste, will low viscosity silicone -based lubricant work?
For insulating the screws you really need something that is going to form a barrier and also not wash / drip away.
You can use O-ring grease that the underwater cameras use. Most the time this is just silicon anyway.
Hey Chris, does your cuttlefish barrel track easier than the normal RA barrel with a double roller muzzle? Or is it just for better buoyancy?
Fish Hunter,
The barrel has been designed to be as sleek and maneuverable as possible with the volume / buoyancy needed. It is no thicker than a std RA barrel height wise. And the bands also sit with in the same profile so they dont add to the drag like other cuttle fish barrels.
@@CoatesmansSpearfishing thanks!
Good afternoon! How big is this pipe you have assembled? How many centimeters do you leave the elastics in?
The barrel is a 26.5mm Rob Allen spec.
Hi coatsman is the standard 26.5mm Rob Allen barrel the internal diameter or external diameter of the barrel?
internal diameter
If i upgrade to double roller muzzle and do a trip and big fish dont show up but lets say some mahi do…. Could i just leave one band on or are both needed at all times? If both needed, is it possible to just load the one band?
Hey Eryck,
Yes you can load just one band, or just use one 16mm band. One 14mm band won't have a lot of power. And what happens when a Wahoo swims past? You will want both 🤙
Will this roller head work with 16mm bands ? I can only find info for 14mm bands
Hey NERD SPEARFISHING you can use 2 x 16mm bands. But then you need a 8mm shaft and for that you need to have a cuttlefish barrel to float the heavier shaft.
@@CoatesmansSpearfishing awesome that is pretty much the setup I will be running. cheers
Price for the gun?
Hi Eli, pls drop me an email saltydiver@gmail.com and I will send you a price list. Thanks a mill Chris