Gel Car Number Plates, No Documents Required, £25 A Pair on amazon How, To Fit Car Licence Plates
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- My Old Number Plates Were Looking A Bit Shabby, So once again had a set and was not disappointed with the quality & totally road legal.
In this video I show how to get a set and fit them to your car.
Link to all parts and tools in the video:-
3D & 4D Plates £24 amzn.to/3YE6ozQ
Milwaukee grips set £32 amzn.to/3qBLK70
Milwaukee shockwave drills £24 amzn.to/3QCo8d4
Milwaukee drill and screwdriver impact combo amzn.to/448ECg8
UltraGrime Wipes £12 amzn.to/3siFKR5
Blue roll amzn.to/47Aqsam
3M scotch tape £10 amzn.to/3P0b4wI
Toughbuilt scraper knife www.ecatoolfas...
Milwaukee screwdriver set www.ecatoolfas...
The last time i did a new plate change on vehicle i put 2 thick elastic bands around either end of the plate to hold the original one steady while drilling the holes just a little tip for anyone in the future who may read the comment 👍
Thanks for the great information👍🏻👍🏻🛠
Can’t believe that you didn’t have to show any documentation. I guess they don’t care as long as there getting your 💰 money!
I’ve got a set of these and they cost me about £45, so I think you’ve got a bargain there and no hassle 👍🏼
A great price, Thanks for the great comments👍🏻👍🏻🛠
Another nice video, got myself a 4D plate with the link and used the same double sided tape rather than use screws, seems to be fixed very well. Cheers.
Thanks for the great information👍🏻👍🏻🛠
Nice little add on, gives the car a finish that shows it's looked after 👍
Thanks for the great comments👍🏻👍🏻🛠
Yeah i like your style mate. Nice & clear to understand with warnings of the pitfalls good stuff .
Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠
That must be the company i ordered my 4D plates from recently. They were the only outlet i could find on Amazon that didn't require any documentation.
I have to say the quality is outstanding, just a tip to remove the old sticky pads, i pulled the end of the plate and slid a craft knife under and cut the pads off.
Then just a matter of cleaning the valance up with a wipe over with isopropyl alcohol.
Thanks for the great information👍🏻👍🏻🛠
Another good vid including your expressions, Class ! Keep up the good work.
Glad you like them! Thanks for the great comments👍🏻👍🏻🛠
Hi are they marked to make them legal . Needs to show the following. who supplied the number plate
be marked with a British Standard number - this is ‘BS AU 145e’ for plates fitted after 1 September 2021
All stamped up nice and legal, Thanks for the great comments👍🏻👍🏻🛠
I would have creased up laughing if those rear plates had dropped off as you walked away!! Great job though Anton. I smear a bit of grease on those screw heads to avoid the corrosion
Thanks for the great information👍🏻👍🏻🛠
Belt and braces on the sticky stuff 😂 exactly what I would have done. Do it once and do it right 👍
Don't want them falling off when the bread knife is driving 😂 Thanks for the great comments👍🏻👍🏻🛠
Great video again, my opinion you went overkill on the rear number plate with the adhesive sticky tape, just the white pads alone are enough.
The last one kept coming off, so no chances taken😂 Thanks for the great comments👍🏻👍🏻🛠
Are your plates the standard domed ones or did you add the extra gel ?
One set is square edge 4d standard, the other is 3d domed standard Thanks for the great comments👍🏻👍🏻🛠
£36 a pair 3d still bargain, thanks just ordered coming thursday 2nd may tc
Nice one! Thanks for the great information👍🏻👍🏻🛠
Years ago no logo or makers name required . Even more so on. Black and silver plates
Thanks for the great information👍🏻👍🏻🛠
what's the reason that the front plate is white and the rear plate is yellow? (yes, I know it sounds like a stupid question, but I'm in the US and our plates can only be issued by the state government)
Its always been that way in the uk, well we started on black back ground and white letters, then changed to this style in the 1970s they must have found it hard to know what's the front and rear of the car😂 so changed the colours,Thanks for the great comments👍🏻👍🏻🛠
Hmm, they are breaking the law supplying these without documentation. This is how criminals get their plates.
Yep, Thanks for the great comments👍🏻👍🏻🛠
Big company called Plates for cars do this but I dunno about these ones linked in the video. Some can apparently get away with it because they are based / operate in Ireland which does not fall under the law of needing documents to put the company logo underneath. The ones with the company logo missing at the bottom are just show plates and people run them at their own risk
Well you’ve just give people you reg and told them where to get plates without ID now they can clone your plate ! Good idea 🤔
Ya but it makes it easy to clone as well 😳
Just cost me £13 for a normal rear / trailer this week 5:10
Thanks for the great comments👍🏻👍🏻🛠
Tip of the day, don’t bond ya plate to ya car 🤭🤭
Thanks for the great information👍🏻👍🏻🛠
Brother I have Toyota yaris 2007 and It's u fuel pump has died 5th time I changed the pumps, work 3 or 4days and died, what's the reason?😢
Most likley you have a bad earth, or the fuel filter is blocked, Thanks for the great comments👍🏻👍🏻🛠
No no drills glue and pads you use
Thanks for the great comments👍🏻👍🏻🛠
Next time warm it up it will let go.
Thanks for the great information👍🏻👍🏻🛠
@aaanton11 I need help I tried to fix my turn signal on my peugeot 107 with help of your video it works but now my high beam won't turn off the only way I can turn it off s by disconnecti a part of the turn signal
I have has a few comments about the main beam being stuck on after rebuild, thanks to Stuart brown for this great information:-
Thanks for this excellent video, I wouldn't have attempted this without these detailed instructions showing every step - the indicators on my daughter's 56 plate 107 now working again! Also had the problem with main beam stuck on first time - found there is a piece a plastic (visible above your thumb and forefinger holding the cotton bud at 20:15) which isn't fixed and can jump off the little knob below it, and end up sitting in front of it instead of on top of it. This stops the stalk moving between the dip and main beam positions, and seems to force main beam on. Worked fine once taken apart (again!) and returned to the right position.
Hope this helps someone else.
Thanks for the great comments👍🏻👍🏻🛠