I retrofit a $200 JK winch bumper onto my XJ Cherokee by building my own bumper brackets out of Iron Rock Off Roads DIY frame tie-ins and some scrap steel. Link to the bumper: www.amazon.com...
I know this is an older video but this is for everybody looking into doing this mod or removing original bolts in general. Take a map gas torch, one of the little handheld ones, and heat the head of the bolt for about 30 to 45 seconds before you start trying to remove it. Once you start taking it out go two cranks left and one crank right over and over until it's loose. You may have to heat the head of the bolts 1 or 2 more times depending on how long it is.
Outstanding idea. Well executed too. I made my own lift as well. I used rustys coils. Rubicon express junkyard lower short arms. Rocky road outfitters track bar.iro spacer and brace for steering box and heavy duty solid tie rod. Recently scored a set of 3 and 1/2 in rear leafs by pro comp from the junkyard. All told under 400 on the lift. All parts can be rebuilt by me from stock parts. Anywhere in the usa..from any parts stores.
Seems like you spent around the same amount of money in the end as you would have for a xj bumper. I was thinking about this same thing but i only have a 110 welder and with the cost of steel i think ill just get an xj bumper.
Do you know how long and how wide the brackets were before you modified them. Im curious wha the total length and width was out of the box? I scored a front and rear jk bumper for free but i have little to no money to make this work. I have access to metal and a welder. Just curious what length to cut the metal at.
I took a measurement real quick....The front 2 bumper bracket bolts (on the frame) are a tad over 6.5" from the front of the new bracket (where the bumper mounts). Hope that helps!
What kind of lift do you have on it? How many parts came in the lift you got? With so many lifts that some consider you have to change certain parts and others that feel they don't need it, what did you go with to feel safe if you daily it or highway travel.
The lift is kind of a hodge-podge of different brands. But its basically just a short arm 4" lift...I picked each part individually to to suit my needs and budget.
@@theprojecthomestead5623 much appreciated on the reply. Did you have to use an adjustable track bar on a 4" lift? Any driveline vibrations? Sye? I'm about to lift mine 3" and so many people saying you need this and that with many "kits" that are considered incomplete, just trying to see all you had to use to make it road worthy without death wobble. Thanks.
Yep.....and welding in corners along with if the metal has been magnetized makes DC current blow out of corners and push away from seams...best option is use the AC current position on the welder. I've got one of those 110 volt welders and you've got to use the smallest dia rod at max amps and make a root pass with two cap passes. My Miller 220 Syncrowave with wire feed works best though.
Ask your father to make a dozen of these and they will fly off his hands! I don't want to shell out $500 for a bumper that looks like it was made by a 12 yo. All this while JK owner can spend as little as $250 for a bumper that looks like it was designed by a team from NASA!
I've hit alot of things with my poison Spyder bumper and fenders on my JK, deer, antelope, and rocks. Its all held up well, one day I'll have a jumping deer but hopefully the stinger will catch it.
those welds are killing me
I know this is an older video but this is for everybody looking into doing this mod or removing original bolts in general. Take a map gas torch, one of the little handheld ones, and heat the head of the bolt for about 30 to 45 seconds before you start trying to remove it. Once you start taking it out go two cranks left and one crank right over and over until it's loose. You may have to heat the head of the bolts 1 or 2 more times depending on how long it is.
Could you make more mounts I’d buy a set and shipping
Outstanding idea. Well executed too. I made my own lift as well. I used rustys coils. Rubicon express junkyard lower short arms. Rocky road outfitters track bar.iro spacer and brace for steering box and heavy duty solid tie rod. Recently scored a set of 3 and 1/2 in rear leafs by pro comp from the junkyard. All told under 400 on the lift. All parts can be rebuilt by me from stock parts. Anywhere in the usa..from any parts stores.
Club xj approved
Fawk yeah brother!!!!!! 🤣🤣🤣
Nice Jeep and good video brother👍
As a JK owner, we approve! Nicely done!
That shit looks nice..good work boss nice jeep xj
Thanks for making this video. I got some good ideas from this. 👍
Nice job!
Awesome work!
Hello. I wanted to ask you, do you send goods to Estonia?
Did u lift your xj or cut it and are those 35s or 33s love the look
What hood vents are those?
Seems like you spent around the same amount of money in the end as you would have for a xj bumper. I was thinking about this same thing but i only have a 110 welder and with the cost of steel i think ill just get an xj bumper.
Check out Affordable offroad
I like Daisy
Do you know how long and how wide the brackets were before you modified them. Im curious wha the total length
and width was out of the box? I scored a front and rear jk bumper for free but i have little to no money to make this work. I have access to metal and a welder. Just curious what length to cut the metal at.
nice and simple.
Looks good, nice mod.
Do you have measurements of how far from the xj regular bracket sticks out?
I took a measurement real quick....The front 2 bumper bracket bolts (on the frame) are a tad over 6.5" from the front of the new bracket (where the bumper mounts). Hope that helps!
How much would you charge for those brackets?
How much did you end up cutting off? Curious if I can use the drops as the 4 bolt plates...Thanks!
Just hard you say 3.5" ....not enough. Thanks!
What kind of lift do you have on it? How many parts came in the lift you got? With so many lifts that some consider you have to change certain parts and others that feel they don't need it, what did you go with to feel safe if you daily it or highway travel.
The lift is kind of a hodge-podge of different brands. But its basically just a short arm 4" lift...I picked each part individually to to suit my needs and budget.
@@theprojecthomestead5623 much appreciated on the reply. Did you have to use an adjustable track bar on a 4" lift? Any driveline vibrations? Sye? I'm about to lift mine 3" and so many people saying you need this and that with many "kits" that are considered incomplete, just trying to see all you had to use to make it road worthy without death wobble. Thanks.
can't find bumper with that link, what mfg?
Do you remember what size the bolts for the steering box were?
I'm pretty sure the bolts came with the steering brace kit, so no I don't know what size they were.
The welds😭
Yep.....and welding in corners along with if the metal has been magnetized makes DC current blow out of corners and push away from seams...best option is use the AC current position on the welder. I've got one of those 110 volt welders and you've got to use the smallest dia rod at max amps and make a root pass with two cap passes.
My Miller 220 Syncrowave with wire feed works best though.
nice rig! what size tires you running?
35" Interco TRXUS on 16" Moab wheels
I like what kind of tires? How much lift you running?
Ask your father to make a dozen of these and they will fly off his hands!
I don't want to shell out $500 for a bumper that looks like it was made by a 12 yo.
All this while JK owner can spend as little as $250 for a bumper that looks like it was designed by a team from NASA!
Right?
Never save money on a bumber.
The thing might safe your life when hitting a deer/moose.
I've hit alot of things with my poison Spyder bumper and fenders on my JK, deer, antelope, and rocks. Its all held up well, one day I'll have a jumping deer but hopefully the stinger will catch it.
Nice job!