DAPAT MO ITONG MALAMAN | HEAD WORKS | XRM125 TRINITY RESTORATION PART3

HEADWORKS;
•TURBOLENCE PORT
•STAGE2 CAMS 5.2MM
•GRIND VALVE RETAINER
•GRIND VALVE LOCK
•VALVE SPRING 5 TURNS
•VALVE SEAL
XRM125 TRINITY RESTORATION PART1⤵
• XRM125 TRINITY RESTORA...
XRM125 TRINITY RESTORATION PART2⤵
• UPGRADE FOR LONGRIDE |...
❤LIKE,COMMENT,SHARE❤
SUPORT MY CHANNEL😇🙏
*SUBSCRIBE*
click the notification bell para updated ka kapag may iuupload akong video⤵
/ @muksmoto
FACEBOOK ACCOUNT
/ jr.villarin.940

[@dragking9735]

lodz if saakin lg mdyu dihado ang dimple porting sa NA engine same sa XRM125, applicable lg kce ang dimple porting sa direct port injection engine tsaka naka turbo charge para hindi ma overflow ang combustion chamber nang makina, pero dpindi narin cguru, keep up the content lodz kunti lg ang may ganitong channel na naka focus sa old carb engines

[@emmanuelabon3392]

Great content mukz

[@rheaescano4265]

Nice! next video mo sana sir kung pano tabasin ang valve lock at valve retainer

[@muksmoto]

Dali lang paps, gamit ka lang vice grip and cutting disc.

[@kenjohnnyv9378]

Paps paano nman Kung sa wave 100 stage 2 cams kailangan po Rin bang mag palit Ng valve spring?

[@josephdenmarcavila811]

Video sa pag timing ng cams sir at adjustable cam gear

[@alsorsingcala4795]

Boss,6.8 lift cam ko.hndi ako nagtabas ng retainer at valvelock.hndi naman nasira valve seal ko

[@rotsenbartiana3740]

Ayos! Sna gnyan din top ng sa akin.😂😂

[@muksmoto]

Try mo paps. Sulit naman eh☺

[@rotsenbartiana3740]

Budget nyan lods mgkano?

[@michaelramos5243]

Nice video paps! Keep it up.. mawalang galang po, matanong lng, ano yang "TURBOLENCE"? Yan din b ang "TURBULENCE" or "TURBULENT FLOW"? Ang alam ko lng po ang turbulence ay nagko-cause ng disrupting and irregular flow of air dahil s pag bump ng airflow sa mga irregularities ng surrounding structures. And for that siguro mas naa-atomize p ang air and fuel mixture bago pumasok sa combustion chamber and thus resulting to a more complete combustion. Pano naman po yung "TURBOLENCE"? pasensya n paps, nagtatanong lang, para malinawan din po. God Bless!

[@muksmoto]

Yan din yung turbulence flow idol.

[@johntricks.leynespuquiz2400]

Boss ano po kayang stock na sukat na cams nang wave 125

[@joeltillan295]

anong magandang grind sa cam ng xrm boss yung pabilog o pointed?

[@retrowheels9214]

Pwedeba mag stage 2 cam sa stock head ng xrm 125? Plug n play nabam

[@borelosssseee169]

Turbulence port is applicable for direct injection engine gaya ng fi tapos mga turbo charge engine pero sa carb walang silbe yan mas ok kung port tapos ipolish mo maganda pa flow

[@kinopagcamaan8140]

Matagal napo gamit ang turbulence port lalo na sa drag racing community sa mga carb engines. Ilang beses narin nagchachampion ang ganyang port. Kaya malabo po yang sabi nyo

[@kinopagcamaan8140]

Matagal napo gamit ang turbulence port lalo na sa drag racing community sa mga carb engines. Ilang beses narin nagchachampion ang ganyang port. Kaya malabo po yang sabi nyo

[@jimmymangal6635]

Boss anong ginamit mo sa pag turbolence port?

[@jmarrc211agaloos5]

idol linagay mo ba yung maliit na spring na stock sa valve?

[@leizelcaminade9204]

Lods , okay lng ba stage3 na z5 ano mga gagawin ?

[@rolandnhedbuenconcijo2638]

Panalo content mo paps

[@muksmoto]

Thanks paps

[@jamkeytropicaldop2550]

Part4 boss

[@kenjohnnyv9378]

Paps sa wave 100 kailangan bang Alisin ung isang valve spring kpag ikakabit ung 5 turns valve spring ?

[@muksmoto]

Bili ka lang ng Rvalvespring.

[@kyletesta4203]

Paps magkano fuel consuption sa setup mo? Ride safe

[@clintrule2092]

Kumusta yung motor mo ngayun naka turbulence paps? Pa update naman kong recommend bayang port nayan may balak kasi ako. Sabi nila mas maganda daw yung ruff port lang

[@charlesdevour]

Maganda rough port lng

[@noelpaimalan6874]

Sakin boss umusok mag 2buwan na, valve seal kaya probs, 57 block din ako

[@muksmoto]

Check valve seal and piston rings paps.

[@joshyusores7548]

Paps anu ginamit mong tools sa pag porting na ganyan yung merong butas butas tsaka ano size ng mga pag pporting. Salamat RS

[@muksmoto]

Pinaport ko lng yan paps

[@rodrigojrquino5901]

.papz pwde ba yan sa longdrive o sa daily use.salamat papz

[@muksmoto]

Pwede paps

[@felixarnejo6400]

Roller type po ba yang rocker arm mo?

[@muksmoto]

Hindi sir

[@jozyraviray2635]

paano po tabasan yung valve lock tsaka panu tabasan yung nakapatong sa valve spring?

[@muksmoto]

Grinder lang gamit namin lods.

[@redjacketph7121]

Ilang mm ang tabas sa valve lock at retainer sir?

[@muksmoto]

1mm

[@josephiglesias7742]

5.2 lift kahit 6.0 di paren babangga lods

[@sebastianzucr4389]

sir 60mm ung bore ko tas stock head panu ko bos mawawala ung head knocking ng makina ko salamat bos

[@muksmoto]

60 mm stock head,stock din ba laman loob ng head sir?

[@sebastianzucr4389]

@@muksmoto anung magandang valve sir

[@muksmoto]

Pitsbike

[@bernardtumagcao7704]

wow nman ganyan din want q...ilan na kaya magiging topspeed nya paps..salamat

[@muksmoto]

Diko pa matopspeed sir city drive kasi

[@bhalveloso228]

Sir saan po lacation niyo

[@muksmoto]

Ilocos po

[@johntricks.leynespuquiz2400]

Stock cams lang ginamit mo??

[@muksmoto]

Stage 2 cams

[@usmanfhadramira.2562]

Hindi tatama ang valve retainer sa valve seal kong 5.2mm lang cams gamit. Hanggang 6.0 pwede stock plug and play pero sa 6.5 pataas na kailangan mag bawas retainer at kong 7.0 na cams gamit valve guide na papalitan pang mio. Sana maka tulong paps👍

[@muksmoto]

Thanks sa kaalaman natin sir. Keep it up. Share share pang tayu🙏👍

[@usmanfhadramira.2562]

Share share share👍

[@rodriguezbenjaminjrguzman6359]

Paps need pa ba ng valve pocket kahit stock piston lang tas 5.2 na cams?

[@muksmoto]

Yes

[@leizelcaminade9204]

Mga sir nka 57 mutaru borekit ako , tapos gusto ko sana mag 6.0 lift z5 need pa ba ulitin yung valve pocket ng piston ?

[@yuanyuzuke7826]

Hindi ba maingay papz makina mo?

[@muksmoto]

Hindi naman paps