Great break down. These videos are great. // Overall Review -- In-depth look at Leaperkim Lynx, focusing on build quality and improvements. -- Noted for simple, straightforward design, easy to assemble and maintain. // Parts and Features -- Includes motor, suspension rod mount, Kender tire, two battery packs, rear stand handle and rod, power supply (150-12 volt, 5 amp). -- Battery side panels are easy to install; control bar has a straightforward design. -- Features U-shaped suspension bracket and robust motor setup. -- Bright lights and speaker included; concerns about light bracket durability under impact. // Tear Down and Inspection -- Control unit at top sealed with silicon, simple internal layout. -- Improved cable management for battery pack, ensuring snug fit and reduced damage risk. -- Chassis design is thin but strong, focused on weight reduction; handle is chunky but sturdy with some flex. -- Charging port at back with protective cover against water splash. // Performance Testing -- Free spin speed of 65 mph in normal mode, 82 mph in high-speed mode. // Final Thoughts -- Well-built with thoughtful design elements; minor concerns about part strength under high impact. -- Design simplicity aids in easy assembly and maintenance. -- Use of insulation tape on certain parts recommended for safety.
Indeed a lot has changed... but they just couldnt help themselves and had to throw in some exposed 150V leads on a loose wire in a metal compartment. That could make a short not involving the fuse, nonetheless. I guess they feel like theyve got to honor their roots and have at least some units spontaneously combust. Another decade and these toy companies will have fully evolved to actual automotive companies I suppose.
Hello, what tightening torque do you use to tighten the suspension mounting brackets, for the motor it is 20Nm but how much for the small brackets? Greetings and thank you for this interesting video.
Same as Sherman S and Patton, 8Nm, but since it's soft aluminum and easy to de-thread to be on the safe side better to go 7Nm. BTW motor screws are 18Nm not 20Nm.
. I hated my inmotion V11 because it's was hell replacing the tire or just pumping the shocks because of the pressure leaks. I hopethey lower the price a little in a few month for the Lynx
Great video, I was curious about the products you’re using on bolts as you assemble the wheel. Do you discuss them in a prior video? I figure that medium thread locker is being used for most bolts, but what are you putting on the tightened bracket bolts after they are tightened?
Might it be worth gently warming the fuse holder housing, which may prevent it from cracking? Plastic gets brittle when it is cold too, of course. We hope to learn from your m… experience 😊
Question, what would you use to replace the seal around the control box (damaged it when having to replace the 24v board)? Home Depot only had two that were recommended to me the Permatex Ultra Black (gasket maker Oil resistant) or the permatex clear adhesive sealant (silicone RTV). Would either of these work or would you recommend something else?
1) I'm not saying kevin works for ehweels ???? it was a question of whether or not I have to make sure screws are tightened and what not. 2) chill out brother. @@InsanitiesBrother
Its allways advisable to check your wheel, eWheels EUC tend to get more attention off the line, they have their own team of inspectors etc. Still, check all your bolts
{tl;dr. I'm hard pressed to criticize the LYNX. So far, sooo good!.} I suspect that the controller base casting is Cast Magnesium (hopefully an Yttrium alloy). Stronger and lighter than aluminum, and without the self-sustaining burn characteristic that was typical of prior Mg alloys. If so, those holes appear adequate if not directly shock-loaded in a tumble. If it's aluminum, then I'd prefer that this casing be CNCed from a block of T6 AL with thicker ribbing and torsional gussets. It will be interesting to see how and where this casting fails over time. I wonder how much the replacement part costs because it's not really weldable, except by an extremely proficient shop? What's the fork crown material? Of course, the fantasy would be carbon fiber or EDM these parts from titanium; that would be worth double (to me), as I'd only have to buy an occasional controller and axial flux motor upgrade to keep it running competitively for decades... or, until electronic linear motor suspensions become viable (at which time it becomes reasonable to upgrade the entire unit. Now, LeaperKim needs a 14" version to capture the new rider, youth and elderly markets. Capturing disillusioned e-scooter riders is also ripe for adoption.
Kevin, Wish we could see all of your unedited repair/build videos on a separate sub-channel... if you don't plan on monetizing the content in the future as training videos. I could watch you work all day long. Thanks 😉
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Great break down. These videos are great.
// Overall Review
-- In-depth look at Leaperkim Lynx, focusing on build quality and improvements.
-- Noted for simple, straightforward design, easy to assemble and maintain.
// Parts and Features
-- Includes motor, suspension rod mount, Kender tire, two battery packs, rear stand handle and rod, power supply (150-12 volt, 5 amp).
-- Battery side panels are easy to install; control bar has a straightforward design.
-- Features U-shaped suspension bracket and robust motor setup.
-- Bright lights and speaker included; concerns about light bracket durability under impact.
// Tear Down and Inspection
-- Control unit at top sealed with silicon, simple internal layout.
-- Improved cable management for battery pack, ensuring snug fit and reduced damage risk.
-- Chassis design is thin but strong, focused on weight reduction; handle is chunky but sturdy with some flex.
-- Charging port at back with protective cover against water splash.
// Performance Testing
-- Free spin speed of 65 mph in normal mode, 82 mph in high-speed mode.
// Final Thoughts
-- Well-built with thoughtful design elements; minor concerns about part strength under high impact.
-- Design simplicity aids in easy assembly and maintenance.
-- Use of insulation tape on certain parts recommended for safety.
Spot ON.
"Simple machine to put together or build" is music to my ears!
Best lynx quality video. Great suggestions too. Definitely going to run through mine when it arrives and do the same.
Thank you.
Absolutely love how the quality appears to be improving
Indeed a lot has changed... but they just couldnt help themselves and had to throw in some exposed 150V leads on a loose wire in a metal compartment. That could make a short not involving the fuse, nonetheless. I guess they feel like theyve got to honor their roots and have at least some units spontaneously combust. Another decade and these toy companies will have fully evolved to actual automotive companies I suppose.
great inspection as allways Kevin and Erides are top.
Thank you that looks easy enough to break down and make sure everything is nice and tight. Thank you. I just placed an order for mine.
Expert analysis .... everything is in order and the gloves are on 😀
My god, that thing is beautifully made, looks easy to work on too.... think I'm in love, but punching above my weight (and bank balance).
v14 building quality check video coming soon?
this is asmr for me
The bottom suspension bracket, what did you torque those bolts at?
Thanks Kevin, and happy holidays…
Great video! Will follow your tips when mine comes
Indeed, very informative 👌
Thanks
Great video
I like that black rim
Hello, what tightening torque do you use to tighten the suspension mounting brackets, for the motor it is 20Nm but how much for the small brackets? Greetings and thank you for this interesting video.
Same as Sherman S and Patton, 8Nm, but since it's soft aluminum and easy to de-thread to be on the safe side better to go 7Nm. BTW motor screws are 18Nm not 20Nm.
@@RonnieRides Thank you so much
I use 10Nm for the motor suspension bracket.
@@eucupgrades LeaperKim themselves says 8Nm
that is why it is loose.@@RonnieRides 😃
. I hated my inmotion V11 because it's was hell replacing the tire or just pumping the shocks because of the pressure leaks. I hopethey lower the price a little in a few month for the Lynx
next few months would be unlikely mate..demand is high...i dont get mine till feb...but it sure looks good
Great video, I was curious about the products you’re using on bolts as you assemble the wheel. Do you discuss them in a prior video? I figure that medium thread locker is being used for most bolts, but what are you putting on the tightened bracket bolts after they are tightened?
I'm pretty sure it's red locktite
On second thought probably blue
Might it be worth gently warming the fuse holder housing, which may prevent it from cracking? Plastic gets brittle when it is cold too, of course. We hope to learn from your m… experience 😊
What is the water resistance in your opinion, how would you compare it to Inmotion wheels?
What torque did you set your torque wrench to when you were tightening those bolts?
Question, what would you use to replace the seal around the control box (damaged it when having to replace the 24v board)? Home Depot only had two that were recommended to me the Permatex Ultra Black (gasket maker Oil resistant) or the permatex clear adhesive sealant (silicone RTV). Would either of these work or would you recommend something else?
Just use any quick dry all weather silicone will do the job.
Thx👌🏼
What bolts are you putting locktite on
17:19 what product do you use? the reference ? Thx
👍👍👍
Will ewheels take care of this for me or do I actually have to take apart my brand new wheel as soon as I get it ????
1) Kevin doesn't work for e-wheels
2) Take care of what exactly? wrapping the fuses?
1) I'm not saying kevin works for ehweels ???? it was a question of whether or not I have to make sure screws are tightened and what not. 2) chill out brother. @@InsanitiesBrother
Its allways advisable to check your wheel, eWheels EUC tend to get more attention off the line, they have their own team of inspectors etc.
Still, check all your bolts
On the bottom stanchion tubes, after you locktite the 6 bolts you put something from a tube on the head of each bolt. What is it??
They are rubber silicone.
@@eucupgrades why put silicone on top of a bolt? Is the idea it seals around the bolt head to the solid surface. Sorry never saw that before.
@23:25 Nice shoes 😁
I like riding in just crocs with no socks in the summer. Once you learn to slowly reduce your ego it helps improve your quality of life.
Way to small screws for a suspension . For motor looks ok .
Does the Lynx have speakers for music?
No
No
Thankfully not.
Loctite on the screws?
yes.
{tl;dr. I'm hard pressed to criticize the LYNX. So far, sooo good!.}
I suspect that the controller base casting is Cast Magnesium (hopefully an Yttrium alloy). Stronger and lighter than aluminum, and without the self-sustaining burn characteristic that was typical of prior Mg alloys. If so, those holes appear adequate if not directly shock-loaded in a tumble.
If it's aluminum, then I'd prefer that this casing be CNCed from a block of T6 AL with thicker ribbing and torsional gussets. It will be interesting to see how and where this casting fails over time. I wonder how much the replacement part costs because it's not really weldable, except by an extremely proficient shop? What's the fork crown material?
Of course, the fantasy would be carbon fiber or EDM these parts from titanium; that would be worth double (to me), as I'd only have to buy an occasional controller and axial flux motor upgrade to keep it running competitively for decades... or, until electronic linear motor suspensions become viable (at which time it becomes reasonable to upgrade the entire unit. Now, LeaperKim needs a 14" version to capture the new rider, youth and elderly markets. Capturing disillusioned e-scooter riders is also ripe for adoption.
Kevin, Wish we could see all of your unedited repair/build videos on a separate sub-channel... if you don't plan on monetizing the content in the future as training videos. I could watch you work all day long. Thanks 😉
@@grb1969 same here
That is a good ideal. Thank you for your support and comments.
Toujours le même problème avec le garde boue .. une galère après pour nettoyer ça machine ..