ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- This is a short video I want to put together to help people facing the issue with this weird symptom. One day, my #chamberlain remote control stopped working but it didn't completely stopped working, it worked randomly. It was weird, I thought it was battery problem but it was not. This may help you to fix the problem.
I had been trying to figure out my garage door for about a year, trying to figure out why I could open the door from 50 meters away but when I was leaving I could not close the door. I checked the antenna reprogrammed vehicles. Then I saw your solution while watching your deck building series. FIXED ! Thanks that was a simple fix to a nagging problem.
Glad it helped and solved the problem.
I had an LED bulb on our Lift-Master opener for at least a year now with no issues. Within the last couple of weeks, the opener would only open the door intermittently, seemingly dependent on where the wireless opener (car, hand-held remote) was located. The problem seemed to be getting worse. This video title matched my issue exactly, so I swapped my LED bub with a CFL and the opener operating issue seems to have been fixed. Only time will tell, but Thank You very much!! (my opener is 20+ yrs old)
Wow!!! I had my garage door professionally installed and even the installer who’s been doing this for over 30 years didn’t have an answer. My remote transmitter and remote keypad was working only in close range by the opener and by close range, I mean literally under the opener. I was frustrated and decided to check TH-cam. Obviously I had LED light bulbs on my opener, checked your troubleshooting video, scratched my head upon seeing your video, and removed the LED bulbs. BINGO 👍. My remotes work perfectly on the other side of the street and problem solved!!! Thx for posting this video. My installer was saying the circuit board might’ve been bad. Thankfully not. Cheers 🍻
I had insulation added recently to my garage and some other work done. After the work was completed, this issue started. I assumed the issue was with the batteries in the remotes, so I changed them. Same issue. I did not think that just adding insulation would cause this issue so started looking for an answer. I just found realized the guys that did the work in the garage put in LED bulbs in the opener as they were working. I removed the LED bulbs and everything is working well again. Thank you for saving my a lot of frustration!
Glad it worked!! If you are interested in solving home issues around your house, please check out my other videos on my channel. There are a lot of DIY projects you may find them helpful too.
GREATEST VOICE-OVER EVER! THANKS FOR THE VID!
Thanks!
Just because this is the exact issue that has stumped me for a month now..... subscribed and liked. I hope we have more common issues In the future so I can look to ya for help. Awesome video and straight to the point. Love it
Perfect answer - this has been driving me crazy and had not idea it was the LED bulb in the GDO causing the problem. THX!!!
Thanks for this, I was just about to call “my guy” to come out and pay him a service call….works like a charm!
Saved you $100
Excellent video! Straight and to the point. 👍👍👍
GREAT!!! i Recently replaced the sprocket and gear drive on the automatic opener, when I put the unit back together I noticed one of the two bulbs was a spiral CFL. I replaced this bulb with an LED bulb. I immediately started getting intermittent opening of the garage door with the in car remote and also the hand held remote that came with the opener. I will replaced bout bulbs with incandescent bulbs and let you know tomorrow if that was the fix. I gave you a thumbs up and also subscribed, here's hoping this fix worked. Thanks again.
The replacement of the bulbs did the trick. NO ISSUES WITH THE REMOTE OPENER.
Glad it helped!!!
Genie makes a special universal LED bulb for garage door openers that does not block remote openers. At my Home Depot it is located with garage door accessories not in the light bulb aisle. Sales associates didn’t know of this problem or that special led bulbs existed. Another shopper informed me.
I thought I was losing my mind. This cured my problems!
Glad it fixed your problem!!!!!!!!
This appears to be the issue why my replacement "885LM MC" Liftmaster remote did not work reliably. Removing the LED bulbs makes a difference. My older "885LM" non-MC model remote from 2015 worked OK with the LED bulbs, just had a worn out contact switch. Must be some design change they did that makes the newer remotes more sensitive to interference.
Thanks for a video, I never figure out this solution, very helpful thanks again
Glad it helped.. check out other videos on my channel too. You may find them helpful too!
LED lights was the problem. Thank you for the quick solution.
this solved my problem too... it actually makes sense too!! however, i change the brand of LED bulb and all was good. thank you!!
bobnoble34 What brand of led did you use. (Picture please)
Yes, please post which brand of LED you use to help other people if you don't mind!
Worked perfect. Thank you.
Glad it helped
Perfect! Thanks for the video.
You just saved me $500!!!!! THANK YOU!!!!!
That's awesome, glad it helped. Check out other videos on my channel if you like DIY, you may bump into some other technical tips and save you some money.
This was my exact same issue. Thanks!
Glad it helped!!
Mine works intermittently all of a sudden. I’ve had the led light bulbs for about 3 years and never had that issue until now.
Thanks for the video. What you describe is the exact problem I've been having and I was excited to learn of such a simple fix, however when I changed back to an incandescent light bulb the problem persisted. In fact, I've tried numerous different bulbs and even no light bulb but the problem remains. As soon as the 6 minute cycle the light stays on ends, the remote works, but during that 6 minute cycle, it doesn't. The mystery continues for me. Any suggestions would be appreciated!
Then, it may not be the same problem.... hmm... maybe you need to consult your local garage door repair specialist.
@@DIYable :
Jim, did you ever find a solution?? I’m having the same issue. Changed the bulb and removed the bulb, the problem still persists. Will open with remote, but won’t close with remote most of the time. Wired button works perfectly fine. Please, let me know if you found a solution.
@@idliketosay i have the same issue. Do you have another LED light installed on the ceiling of the garage?
@@dionaviki5671 replaced the logic board and all works great now. It was abt $89 from chamberlain’s website. All good to go now. And it was a quick and easy install. No, I didn’t have any led lights around, except for the genie light that is made for garages.
I had an older base model wrangler for 20 years with a turn knob radio. Recently I sold it and purchased a new wrangler with all the blue tooth and fancy radio and immediately noticed issues with my garage remote. Works fine when hold the remote and press the button outside of the car, but when I get in my jeep it works half the time. I wonder if my blue tooth interferes
Pro trick : you can watch movies on Flixzone. I've been using it for watching a lot of movies recently.
@Tristen Benson Definitely, I have been using Flixzone for since november myself :D
@Tristen Benson Yea, I've been watching on Flixzone for since november myself :)
@Tristen Benson Yea, I have been using Flixzone for since december myself :)
It worked! Thank you
Glad it helped!
I have a three car garage and I had LEDs in all three bays. I only had trouble with one bay not working properly. First I tried replacing the battery and nothing changed. I tried replacing the LED in that bay with an incandescent bulb and nothing changed. I tried reprogramming the remote and nothing changed. I not sure what to try next. I did have to replace the back panel on the opener several years ago. This is the only bay where I had to do that. I'm wondering if the car's electronics are somehow interfering with the remote.
BEFORE YOU BUY THE OVERPRICED "GARAGE OPENER LED BULBS" READ THIS
The more "modern" LED bulbs are made to work with dimmers, just like the old incandescent lights. In order to make that happen with LED bulbs, they put in the LED bulb a variable square pulse wave generator which is basically very close to a classical variable frequency oscillator.
And that basically, is why SOME LED bulbs interfere with your garage door RF receiver.
The solution to your problem is very simple and very cheap.
Go to the nearest HOME DEPOT store and buy the CHEAP NON-DIMMABLE LED bulbs. TA DAH!
Yes, the only "special" thing about the "special" garage LED bulbs is the huge price mark-up
If this video solves your problem. Remember to check out the other related video: "How to upgrade your Garage Opener light bulb to super bright LED shoplight?"
th-cam.com/video/koskBsGOLy8/w-d-xo.html
...but what if the lights aren't on at all, and when you come home the door won't open? Do the LED bulbs cause interference when they're off, too?
That's a very very good question, technically it shouldn't cause any interference when it's off. So, this may partially explain why this happens randomly!!!!!
i have exactly the same problem as you described, tried all steps too, however i have never changed the light bulbs, so what do i do?
Thanks, this worked like a charm!
Awesome!!!
My Genie remote opener stopped working 2nd time, locked me out for hours. Last time I had to reprogram it. However my remotes for my other family member work 100% of the time.
I will buy a new one- could have been a bad remote opener. Let me change my light bulb and see. Any advise?
AND IT STILL DOES THE INTERMITTENT
I have the problem, but have used led's for years but suddenly having this. Also GET TO DA CHOPPA!
It could be different brand LED...
THANK YOU!
How to open garage door remote to replace battery
i just installed a floodlight LEP wyze camera and can not open the garage but i can close it with remote.. any comments
WHAT IF I TAKE THE LIGHTS OUT COMPLETELY?
did you ever attempt this???
planning on just taking the light out completely not sure if i really need it in the first place
Hi, my garage door lift master stop reading remote and doesn’t blink led light but delete the codes and blink led light while press for delete any idea thank you.
Yep! Fixed mine!!!
If this works, I’ll venmo you $50. This issue has been getting on my nerves for so long!!!!
Does it work? Send me bitcoins okay?
I came to say two things. This worked great thank you. But man your voice it’s hard to listen to. Yes I liked and subscribed
Who the hell narrated this ? Cookie monsters cousin
C is for cookie that's good enough for me.
🤣🤣🤣🤣
🤣🤣🤣🤣🤣🤣
The Count.
Does the offending light bulb have to be on in order for its frequency to interfere with the remote? My hardwired opener always works. Only the remote openers work intermittently. Sometimes work to open then I have to wait for some interval of time like 5-10 minutes and then it will work to close.
Try to take the light bulb away and do some testing, that's the only way to isolate it's the interference from the light bulb. If you are still having issues without light bulb on the opener, something else is wrong.. then you may need to contact the pro to come take a look.
thanks you
Yep that was it.
Didn't work