Yer i got same downpipe and it just rubbs on the bottom of the car plus the rest of the exhaust hangs too low and catches on every speed bump. Wast of money. Gaskets don't last especially the turbo to downpipe. You've put your axle stands in the wrong place and you can see on the video where your floor has bent up.
@@jamesangus9144 according to the manual the rubber donuts are the factory lift points. Mines ok now I had to put it up on the ramp with a torch and do some hot bending to the brackets fits lovely. Agree on the gaskets there toss replaced them with decent ones. I’ve welded a cat in now so it fits even better..
Please please say you switched out the downpipe gasket for an Oem one? Mine only lasted about 2 months before blwoing :( Replaced for an Oem MLS gasket & its still fine 1 year later :)
That's a good idea too.. I hope yours lasts. I had the exact same gaskets to start with. The one with 2 bolts is fine as it doesn't have as much pressure / heat
@@GreaseMonkeysGarage I also had a few issues with it hitting the tunnel / prop.. but after I went down with some tools to push out the heat shields.. it gave more clearance and has been fine ever since :)
@@GreaseMonkeysGarage no mate I get zero vibrations compared to stock setup.. what's happening is it's hitting on your subframe somewhere, The 3 things it can hit is Prop, subframe or tunnel heat shield. Depends how the motor is sat on mounts
@@GreaseMonkeysGarage yes mate.. big ass tractor. My gasket hadn't actually been that bad before on my OEM pipe.. it only split at that gasket when I used to aftermarket gasket between downpipe and turbo.
@@GreaseMonkeysGarage thanks 👍 mine failed mot today CV boot and knocking on front, but it's had new arms tierods, drop links and wheel bearings. Mechanic is baffled. So he's going to rebush my old arms and put em back on. See what happens
Sounds so much better great job mate.
Great vid mate , gives me a good head start on doing mine , well explained, nice 1 👍.
Thanks for your support please subscribe for more videos 👍
Great work though man, its not a nice job to do with all the lack of acces up behind the engine 😆
I would not trust my life to those folding jack stands. Pretty sure the same ones were on project farms channel and they failed catastrophically
Thanks I’ll look into it I’ve got some big locking ones somewhere…
Yer i got same downpipe and it just rubbs on the bottom of the car plus the rest of the exhaust hangs too low and catches on every speed bump. Wast of money. Gaskets don't last especially the turbo to downpipe. You've put your axle stands in the wrong place and you can see on the video where your floor has bent up.
@@jamesangus9144 according to the manual the rubber donuts are the factory lift points. Mines ok now I had to put it up on the ramp with a torch and do some hot bending to the brackets fits lovely. Agree on the gaskets there toss replaced them with decent ones. I’ve welded a cat in now so it fits even better..
Great video. Getting ready to do mine. Did you get a CEL for the cat delete?
Hew great timing on the comment I’m about to weld a 400 CEL into it today video will be out midweek. 👍
Please please say you switched out the downpipe gasket for an Oem one? Mine only lasted about 2 months before blwoing :(
Replaced for an Oem MLS gasket & its still fine 1 year later :)
That's a good idea too.. I hope yours lasts. I had the exact same gaskets to start with.
The one with 2 bolts is fine as it doesn't have as much pressure / heat
@@GreaseMonkeysGarage I also had a few issues with it hitting the tunnel / prop.. but after I went down with some tools to push out the heat shields.. it gave more clearance and has been fine ever since :)
@@GreaseMonkeysGarage no mate I get zero vibrations compared to stock setup.. what's happening is it's hitting on your subframe somewhere,
The 3 things it can hit is Prop, subframe or tunnel heat shield.
Depends how the motor is sat on mounts
Happy days buddy pleased it's better :D
@@GreaseMonkeysGarage yes mate.. big ass tractor. My gasket hadn't actually been that bad before on my OEM pipe.. it only split at that gasket when I used to aftermarket gasket between downpipe and turbo.
Link for exhaust please. Thanks
@@GreaseMonkeysGarage thanks 👍 mine failed mot today CV boot and knocking on front, but it's had new arms tierods, drop links and wheel bearings. Mechanic is baffled. So he's going to rebush my old arms and put em back on. See what happens