Was a cold, wet Sunday, indeed! Look forward to your videos over the holidays when you decide to tough out the weather. Also, GoPro batteries are quite sensitive to temperature changes.
I was hoping Ermox would bring them to the US themselves thus probably a better price even though the price from Fusion isn't bad. The Live Free Armory 2011 has caught my eye as well.
I was interested in the LFA until they backed out of sending one for review. I trust what I have tried, and trust companies who aren't shy about an unbiased and protocol-based review versus the influencer highlight reel type videos.
bul armory are hard to find in stock. I'd love to get the EDC pro or the ultralight pro. The XP Pro is interesting, and the price range seems good, be a good head to head with LFA Apollo 11.
@JD-tn5lz unless you can back thatstatment up don't cone on here talking nonsense. Many people are buying fusion and love them. Unless you can prove they are bad keep it to yourself
@@driftitlikeyouownitI have had serious and minor problems with them and I've owned two of them. The first one, the safety spring housing disconnected, after I replaced that (yes, I'm an armorer, LE, and an instructor) I actually had the bushing crack apart during a training, and then I also had the rear sight fall out. On the second Fusion, I had the bushing on that one crack, I had the actual safety break, and I had to replace a broken mainspring. Those were all minor annoyances and yes, they often go with cheap garbage 1911s...but the clincher was while shooting I had the lugs sheer off, not break, but sheer as well as a cracked frame (no doubt because of the lugs sheeting)...I've NEVER even heard of that happening before. So that one I sent to Fusion...they had it for SIX months before they returned it with a new slide and barrel. They sent back a cheaper slide without the Dawson night sights that the one I sent in had. Neither one of them ever completed more than three consecutive magazines reliably. Look them up, don't take my word for it. Better yet, go to a knowledgeable 1911 armorer or gunsmith and have them check out a random Fusion. Or simply go to some online retail (GBkr or GunsInt'l) and ask yourself "why are these soooo cheap on the used market?" I've only shot factory loads in mine, all standard pressure. Don't believe me, I don't care. Go buy one and you have only yourself to blame. I suppose that if you're a low and slow flat-range cardboard shooter that isn't a serious shooter, you may have no problems with one. I expect most of the people you know that "love them" spend more time looking at them than shooting them. JUNK.
We look forward to hearing your thoughts on those pistol s. That Walther POP Pro F s one nice pistol. I'm so biased I could never do a pistol review 🤔 Thanks again for sharing. Happy Thanksgiving too you 🦃🙏
Haha, You've just got to find a review format that doesn't let personal opinion impact what happens in the videos. Those "reviewers" that just show you flash B-roll footage of shooting always leave me questioning how many times they shot and which blip of footage they decided to use to support their narrative.
My husband and I are biased when watching firearms videos. You're our number 1 source. Your honesty is commendable. Thanks again for sharing your outstanding videos. Happy Thanksgiving too you 🦃🙏
My only concern with that double stack that takes Glock mags is is it gonna have the same issue that the shield arms mags have where has a metal mag and where is the polymer on the Glock mag and then they start dropping out when they stop locking in
Got a question for you, sir. I'm feeling the pistol. I have a couple of questions, please. The first shot is double action and then single? Also, is there an option without the fiber optic inserts?
Everything I've seen on the XP pro has been amazing only issue I've seen is the extended slide stop release being activated with the support hand something I'm really not worried about
@TheRange7 yeah that issue is being addressed in the next build cycle whenever that is haven't decided when I want to pull the trigger on this one exactly..It definitely fits my style tho
@TheRange7 you have truly not been paying attention to the company. ITS ALREADY FIXED. The other issue noted was the slide not locking to the rear… it was an issue with one reviewer so far and they are already working on a low profile version to fix the problem.
@@UniformLiability is that the same video with the slide not going into battery I think it was his grip angle... haven't seen that issue anywhere else I'll probably order one in January for sure 😁
@ huntfishshoot yes. I want to say it was magazine related or grip related on the slide not locking to the rear. He was definitely the first out of 3-4 people having those issues so I’m thinking it’s operator induced but ergonomically it should be fit for multiple different peoples shootings styles so we’ll see. They are truly on top of every issue they are seeing
The only place to find one is BUL Armory's website. Be careful as there is a fake one out there too. The links in my articles will take you to the correct site.
PDP F barrel doesn't appear to have DE proof marks. US produced barrel? PMM making the barrels for the Pro X already... EDIT: Don't see any of the usual proof marks on the slide or frame either. Interesting.
That's what I noticed too, and the frame doesn't say "made in Germany" in the usual place. I believe we have an entirely US-made Walther. Fitting it rode to the range in my US-made Volkswagen, haha.
@@gbgunsmedia And there's this from last January: “Walther Manufacturing is making a substantial investment in our Fort Smith AR factory to facilitate the expansion of our research development and manufacturing of U.S.-produced firearms and accessories,” Tom Goike, Walther Manufacturing President and CEO, said in a news release.
I really can't wait to hear and see your review of the Fusion XP Pro.
Really looking forward to the fusion review, not looking for a range toy but something I can trust to work when I need it to!
I like that Fusion!
Was a cold, wet Sunday, indeed! Look forward to your videos over the holidays when you decide to tough out the weather.
Also, GoPro batteries are quite sensitive to temperature changes.
I always enjoy your enthusiasm. Keep up the great content.
Glad y’all are back.
Definitely looking forward to that BUL armory Ultralight review
I have already did a preorder for the xp pro still waiting
Good info will be watching the reviews thanks!
Nice selection to T&E, last 8 months all I've been playing with is my Lugers, and my Beretta A300 tactical
I was hoping Ermox would bring them to the US themselves thus probably a better price even though the price from Fusion isn't bad. The Live Free Armory 2011 has caught my eye as well.
I was interested in the LFA until they backed out of sending one for review. I trust what I have tried, and trust companies who aren't shy about an unbiased and protocol-based review versus the influencer highlight reel type videos.
I ordered mine on October 31 im already at the stage where i check atleast 3-4 times a day to see if it has shipped
@@dylanwages8717 😂😂
Which one did you order?
I ordered mine September 30th they said originally middle to end of November, I emailed them the other day, now it's beginning to middle of December.
bul armory are hard to find in stock. I'd love to get the EDC pro or the ultralight pro. The XP Pro is interesting, and the price range seems good, be a good head to head with LFA Apollo 11.
The UL was in stock for the better part of a week lately.
Don't go Fusion, not for love or money.
@JD-tn5lz unless you can back thatstatment up don't cone on here talking nonsense. Many people are buying fusion and love them. Unless you can prove they are bad keep it to yourself
@@driftitlikeyouownitI have had serious and minor problems with them and I've owned two of them.
The first one, the safety spring housing disconnected, after I replaced that (yes, I'm an armorer, LE, and an instructor) I actually had the bushing crack apart during a training, and then I also had the rear sight fall out.
On the second Fusion, I had the bushing on that one crack, I had the actual safety break, and I had to replace a broken mainspring. Those were all minor annoyances and yes, they often go with cheap garbage 1911s...but the clincher was while shooting I had the lugs sheer off, not break, but sheer as well as a cracked frame (no doubt because of the lugs sheeting)...I've NEVER even heard of that happening before. So that one I sent to Fusion...they had it for SIX months before they returned it with a new slide and barrel. They sent back a cheaper slide without the Dawson night sights that the one I sent in had.
Neither one of them ever completed more than three consecutive magazines reliably.
Look them up, don't take my word for it. Better yet, go to a knowledgeable 1911 armorer or gunsmith and have them check out a random Fusion.
Or simply go to some online retail (GBkr or GunsInt'l) and ask yourself "why are these soooo cheap on the used market?"
I've only shot factory loads in mine, all standard pressure.
Don't believe me, I don't care. Go buy one and you have only yourself to blame. I suppose that if you're a low and slow flat-range cardboard shooter that isn't a serious shooter, you may have no problems with one. I expect most of the people you know that "love them" spend more time looking at them than shooting them.
JUNK.
Can you please do a review on Girsan influencer mc1911 in 45? I would appreciate it
Ask EAA to send one to GBGuns for review
We look forward to hearing your thoughts on those pistol s. That Walther POP Pro F s one nice pistol.
I'm so biased I could never do a pistol review 🤔
Thanks again for sharing. Happy Thanksgiving too you 🦃🙏
Haha, You've just got to find a review format that doesn't let personal opinion impact what happens in the videos. Those "reviewers" that just show you flash B-roll footage of shooting always leave me questioning how many times they shot and which blip of footage they decided to use to support their narrative.
My husband and I are biased when watching firearms videos. You're our number 1 source.
Your honesty is commendable. Thanks again for sharing your outstanding videos.
Happy Thanksgiving too you 🦃🙏
My only concern with that double stack that takes Glock mags is is it gonna have the same issue that the shield arms mags have where has a metal mag and where is the polymer on the Glock mag and then they start dropping out when they stop locking in
@@Scott079 little confusing, but the mag catch is polymer. If you run polymer mags you’ll be good. Metal on plastic never a good combo
@ that’s exactly why reference to shield arms because unless you get there magnet, you will wear out your polymer mags
It comes with a polymer mag release because it’s using Glock mags
Got a question for you, sir. I'm feeling the pistol. I have a couple of questions, please.
The first shot is double action and then single? Also, is there an option without the fiber optic inserts?
I don't know which pistol you're talking about, but none of these pistols are DA/SA
I am really looking forward to your review of the Fusion Firearms pistol. If it measures up it will be on the acquisition list for 2025.
Everything I've seen on the XP pro has been amazing only issue I've seen is the extended slide stop release being activated with the support hand something I'm really not worried about
@TheRange7 yeah that issue is being addressed in the next build cycle whenever that is haven't decided when I want to pull the trigger on this one exactly..It definitely fits my style tho
@TheRange7 you have truly not been paying attention to the company. ITS ALREADY FIXED. The other issue noted was the slide not locking to the rear… it was an issue with one reviewer so far and they are already working on a low profile version to fix the problem.
@@UniformLiability is that the same video with the slide not going into battery I think it was his grip angle... haven't seen that issue anywhere else I'll probably order one in January for sure 😁
@ huntfishshoot yes. I want to say it was magazine related or grip related on the slide not locking to the rear. He was definitely the first out of 3-4 people having those issues so I’m thinking it’s operator induced but ergonomically it should be fit for multiple different peoples shootings styles so we’ll see. They are truly on top of every issue they are seeing
😊😊👍🏼👍🏼
Thanks
I want the Bul armory hatchet but can’t find it in stock. Uggg
The only place to find one is BUL Armory's website. Be careful as there is a fake one out there too. The links in my articles will take you to the correct site.
PDP F barrel doesn't appear to have DE proof marks. US produced barrel? PMM making the barrels for the Pro X already...
EDIT: Don't see any of the usual proof marks on the slide or frame either. Interesting.
That's what I noticed too, and the frame doesn't say "made in Germany" in the usual place. I believe we have an entirely US-made Walther. Fitting it rode to the range in my US-made Volkswagen, haha.
@@gbgunsmedia Noticed the PDP Pro X has the same lack of proof marks too.
@@gbgunsmedia And there's this from last January:
“Walther Manufacturing is making a substantial investment in our Fort Smith AR factory to facilitate the expansion of our research development and manufacturing of U.S.-produced firearms and accessories,” Tom Goike, Walther Manufacturing President and CEO, said in a news release.
Dude looks like Russell Crowe
Thank you?
@@gbgunsmedia You are welcome.