Hello, I love your videos. I'm Brazilian and I work in a machine shop here in Brazil. Congratulations on your channel. Just a suggestion, you could always mention in the video or in the description how much time it took to perform this machining process. That way, you could even help other people improve their machining times at their workplaces.
Just for curiosity. Isn’t it faster to rough these pockets using Dynamic Milling ( or how it called in Cimatron) using solid carbide end mills than classic milling with indexable tools?
Hello, sorry to bother you. We sell all kinds of steel and metal materials in sheet and round bar, such as P20, 718H, S136, S136H, NAK80, Cr12Mov, SKD11, D2, DC53, H13, SKD61, 8407, FDAC, 1.2344, S50C, DAC, W6, SKH-9, ASP23, ASP30, ASP60, etc. We also have fine plate and vacuum heat treatment processing. We also sell aluminium alloys: 2A12, 5083, 6061, 7075 and other plates and round bars and seamless tubes.
This plate was such a simpler job, but nevertheless I hope you enjoy the video.
강력하고 멋진 MCT가공입니다~
코리아에서 항상 영상 잘보고있습니다 ~ 화이팅
ja det skal nok passe
good job CncFrezar
Ellerinize sağlık temiz işçilik.
Hello, I love your videos. I'm Brazilian and I work in a machine shop here in Brazil. Congratulations on your channel. Just a suggestion, you could always mention in the video or in the description how much time it took to perform this machining process. That way, you could even help other people improve their machining times at their workplaces.
Thanks! But I am forbidden by my boss to publish machining times.
@@CncFrezar You boss is wright. Industrial clients and automotive specialy will chase the last penny next time.
@@CncFrezar Okay, that's fine, I understand. But once again, congratulations on your work, you guys are really good at what you do.
Nice plate work. I like those vises that you use have amazing travel
Hello. When do you decide to grind the part instead of face mill?
Hi. When better surface quality than Ra 0.8 is required
Beautiful work gentlemen.
Thanks
Великолепно!
well done! What tool was used to center the holes?
I described all the tools in the video
hi , you making nice chips ,what kind of face mill tool are you using
Hi. All tools used are described in the video
piękna robota :D
👍👍👍
what kind of molding tools do you make?
Always nice to watch 😊
@@dziablasi like trains
Many different types
I have never seen a grinding machine like that before.
The ramp/helix in on that pocket makes my pants tight. Very nice.
Just for curiosity.
Isn’t it faster to rough these pockets using Dynamic Milling ( or how it called in Cimatron) using solid carbide end mills than classic milling with indexable tools?
Yes. It is faster, but it is only one piece, but if I had set up and prepared the end mills, the time would probably be the same.
@@CncFrezar Makes sense. I was wondering the same thing
Did you guys make mold parts?
It's not on the mold
Which software for the programming?
Cimatron 16
What do you use cnc machine?
UCHINE UDM 2216
@@CncFrezar Thank you
What industry is this part used in?
I do not know that
Hello, sorry to bother you.
We sell all kinds of steel and metal materials in sheet and round bar, such as P20, 718H, S136, S136H, NAK80, Cr12Mov, SKD11, D2, DC53, H13, SKD61, 8407, FDAC, 1.2344, S50C, DAC, W6, SKH-9, ASP23, ASP30, ASP60, etc. We also have fine plate and vacuum heat treatment processing.
We also sell aluminium alloys: 2A12, 5083, 6061, 7075 and other plates and round bars and seamless tubes.
6:00 Hi, Can you tell me more about this tool? :)
To chyba seco minimaster
seco minimaster
Thx🙂
What the heck? Is that a surface grinder with a blanchard style vertical spindle???
it is a segment grinder
Myslim, že naše nové DMFko by pištělo jak prase :)