Bro, I legit owe you a beer if I ever run into you. Its been years since I cleaned bearings and kind of forgot how. Watched your video, did the thing and now I got nice quiet unresponsive bearings again. :)
I need help i have unreponsive yoyo in my bearing stuck i bought loop oil by mistake didnt get spin oil can i use a tiny bit of loop oil then acetone the bearing in still come out unreponsive ?
@@donatas3366 my friend first bearings are made of stainless steel second this is acetone it evaporates very fast third of all iron +oxygen or moisture is rust water +oxygen is hydrogen peroxide
didnt know i needed the clear acetone and supposed to be 100 percent but i used 80 percent with the colored one. But i still knew the acetone i was using wasnt really working that well.
If this made your bearing worse, then you made your bearing worse. You either already damaged it with moisture, or dropped your bearing in a puddle of mixed epoxy, or swam with your yoyo without drying it, crushed it with pliers, somehow got a piece of the c-clip or shield stuck between the race and the cage, used a hair dryer to dry it off, used a solvent with tons of water in it, set it on a dirty surface to dry, or something else equally ridiculous. But new cheap bearings, practice again when they get dirty. The point is, you did not do the method in the video. Unless your bearing was so fucked that cleaning it dislodged enough surface rust to fully destroy the bearing, you did not exactly follow this method. You *may* have followed directions, but you didn't follow the method lol.
Bro, I legit owe you a beer if I ever run into you. Its been years since I cleaned bearings and kind of forgot how. Watched your video, did the thing and now I got nice quiet unresponsive bearings again.
:)
Hey acetone evaporates very fast, so if anyone wanted to dry the bearing quick they could use a hairdryer
Could you just air dry the Bering?
@@randomsnek yes
I need help i have unreponsive yoyo in my bearing stuck i bought loop oil by mistake didnt get spin oil can i use a tiny bit of loop oil then acetone the bearing in still come out unreponsive ?
You should check out the Mega Crash yoyo. I think it'd be fun because it's a crazy big yoyo, almost like a diabolo. Possibly 4A capable even
Is the canned air necessary or can I just set it on a paper towel or something and let dry on its own?
NOOO its gonna rust
@@donatas3366 that is not true it will not rust
@@YLprime water + oxygen = rust
@@donatas3366 my friend first bearings are made of stainless steel second this is acetone it evaporates very fast third of all iron +oxygen or moisture is rust water +oxygen is hydrogen peroxide
@@donatas3366 I could be wrong about rust😑 but acetone will certainly not rust your beautiful bearing
What should I do if my bearing rusts and I have only one and can’t buy other bearings
Then you're screwed
What kind of yo-yo do you have?
Can you use alcohol
Tim u cannot because if you use alchol it will rust and if it will spin it can be cranky
@@roseygaming183 99% isopropyl I'm pretty sure you can... No expert though
can i keep the bearing shield on when i drop the acetone? or it just won't work??
im clumsy and may do something stupid...
G Mod I’m late but it most likely won’t do anything.
Do we just throw the shield and c clip out then
can i do this even if my acetone is not 100%?
I don’t seem to find a bottle with “100% acetone” printed on it. I can see some with 99% acetone. Is it the same?
Yes
Where can I get a lube applicator like that one?
www.amazon.com/Precision-Applicator-Precisely-Ballistol-Lubricants/dp/B017L1MOJA/ref=sr_1_20?ie=UTF8&qid=1528047617&sr=8-20&keywords=precision+lube+applicator
You left the shield and c-clip out. Is there a reason?
Because it doesn't actually matter.
yeah i removed my shields on the other center trac bearing i had
Its also really hard to put it back
I got the c clips out with the ends of a guitar string
How to clean yoyo bearing without lube or fluid?
Great vid!! Thanks brother!
didnt know i needed the clear acetone and supposed to be 100 percent but i used 80 percent with the colored one. But i still knew the acetone i was using wasnt really working that well.
Does it work tho
@@hajinkim-9059 maybe not 💀
I used this method and it made my yo-yo worse what do I do
If this made your bearing worse, then you made your bearing worse. You either already damaged it with moisture, or dropped your bearing in a puddle of mixed epoxy, or swam with your yoyo without drying it, crushed it with pliers, somehow got a piece of the c-clip or shield stuck between the race and the cage, used a hair dryer to dry it off, used a solvent with tons of water in it, set it on a dirty surface to dry, or something else equally ridiculous. But new cheap bearings, practice again when they get dirty.
The point is, you did not do the method in the video. Unless your bearing was so fucked that cleaning it dislodged enough surface rust to fully destroy the bearing, you did not exactly follow this method. You *may* have followed directions, but you didn't follow the method lol.
hahah canned air hahaah its called dust remover ithink hahhaahha
its still pretty much canned air
@@karlenzo15 Depends what you mean by canned air.
It is more like canned gas because what is in air duster you definitely don't find in regular air.
Canned refrigerant, but social humans know that this can be referred to as "canned air" informally